Zener Barrier SB4410
- 2-channel
- DC version, positive polarity
- Working voltage 24 V at 2 µA
- Series resistance max. 233.5 Ω
- Fuse rating 32 mA
- Terminal Base or Termination Board mounting, pluggable
- Replaceable back-up fuse
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
PDF 파일로 된 데이타 시트 다운로드:
데이타 시트 발췌: 기술 사양 SB4410
| General specifications | ||
|---|---|---|
| Type | DC version, positive polarity | |
| Electrical specifications | ||
| Nominal resistance | without back-up fuse 207 Ω , with back-up fuse 223.5 Ω | |
| Series resistance | without back-up fuse max. 213.5 Ω , with back-up fuse max. 233.5 Ω | |
| Fuse rating | internal fuse 32 mA , back-up fuse 32 mA | |
| Hazardous area connection | ||
| Connection | terminals 13; 23 | |
| Safe area connection | ||
| Connection | terminals 11, 12; 21, 22 | |
| Working voltage | 24 V at 2 µA | |
| Indicators/settings | ||
| Display elements | LED power supply, one green LED per channel | |
| Conformity | ||
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -40 ... 80 °C (-40 ... 176 °F) | |
| Relative humidity | < 75 % (annual mean) < 95 % (30 d/year), no moisture condensation |
|
| Mechanical specifications | ||
| Degree of protection | IP20 (installed on Terminal Base or Termination Board) | |
| Connection | wiring via Terminal Base or Termination Board | |
| Mass | approx. 70 g | |
| Dimensions | 9.7 x 70.4 x 68.2 mm (0.4 x 2.8 x 2.7 inch) | |
| Height | 68.2 mm | |
| Width | 9.7 mm | |
| Length | 70.4 mm | |
| Construction type | pluggable housing | |
| Mounting | Terminal Base or Termination Board mounting on 35 mm DIN rail acc. to DIN EN 60715 | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | TÜV 99 ATEX 1449 X , for additional certificates see www.pepperl-fuchs.com | |
| Marking |  II (1) G [Ex ia] IIC II (1) D [Ex iaD] |
|
| Voltage | 27.3 V | |
| Current | 147 mA | |
| Power | 1000 mW | |
| Supply | ||
| Maximum safe voltage | 250 V | |
| Directive conformity | ||
| Directive 94/9/EC | EN 60079-0:2009, EN 60079-11:2012, EN 60079-26:2007 | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Designation | Terminal Base for 1 Zener Barrier: SB9101 Termination Board for 6 Zener Barriers: SB9106 Termination Board for 10 Zener Barriers: SB9100 grounding rail for 20 units: SB9220 grounding rail for 10 units: SB9221 grounding rail for 6 units: SB9222 |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27211016 |
| ECLASS 12.0 | 27211016 |
| ECLASS 11.0 | 27211016 |
| ECLASS 10.0.1 | 27219001 |
| ECLASS 9.0 | 27219001 |
| ECLASS 8.0 | 27219001 |
| ECLASS 5.1 | 27210702 |
| ETIM 9.0 | EC001485 |
| ETIM 8.0 | EC001485 |
| ETIM 7.0 | EC001485 |
| ETIM 6.0 | EC001485 |
| ETIM 5.0 | EC002653 |
| UNSPSC 12.1 | 39121018 |
Details: SB4410
Product Documentation: SB4410
| Safety and Security Documentation | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|
| Operating instructions Zener Barriers SB-System | ENG | 375 KB |
페펄앤드푹스코리아(주)
서울특별시 서초구 서초대로88
6층 (유니온빌딩)
06673 대한민국
대한민국
info@kr.pepperl-fuchs.com
+82 2 34819494
© 2024 All Rights Reserved.
Pepperl+Fuchs는 세계 자동화 시장에서 전자기 센서 및 컴포넌트 제조 및 개발의 선두주자입니다. 지속적인 혁신, 오래토록 변치 않는 품질 및 꾸준한 성장이 지난 70년 동안 계속적인 성장을 보장하였습니다. Pepperl+Fuchs의 전세계에 6,300명의 임직원을 보유하고 있으며, 독일, USA, 싱가포르, 헝가리, 인도네시아 및 베트남에 제조 시설을 가지고 있으며, 대부분 ISO9001을 획득하였습니다.