Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
PDF 파일로 된 데이타 시트 다운로드:
General specifications | ||
---|---|---|
Detection type | magnetic sampling | |
Device type | Absolute rotary encoder as Pure Line | |
Measured variable | position Temperature |
|
Linearity error | ≤ ± 0.1 ° | |
UL File Number | E223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product. | |
Functional safety related parameters | ||
MTTFd | 566 a at 40 °C | |
Mission Time (TM) | 20 a | |
L10 | 5 E+8 revolutions at 24/198 N axial/radial shaft load | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
LED STATUS | LED green flashing with short break (1 Hz) - IO-Link mode |
|
Electrical specifications | ||
Operating voltage | 18 ... 30 V DC | |
No-load supply current | max. 50 mA | |
Power consumption | approx. 1.5 W | |
Time delay before availability | < 1 s | |
Interface | ||
Interface type | IO-Link | |
IO-Link revision | 1.1 | |
Device profile | Identification and Diagnosis - I&D | |
Resolution | ||
Single turn | up to 16 Bit programmable | |
Multiturn | up to 15 Bit programmable | |
Overall resolution | up to 31 Bit programmable | |
Process data | Input 12 Byte - measurement value 4 Byte - resolution 16 Bit - auxiliary mesurement value 4 Byte - switching signals 2 Bit - diagnosis signals 2 Bit - status data |
|
Vendor ID | 1 (0x0001) | |
Device ID | 5243905 (0x500401), 5243906 (0x500402), 5243909 (0x500405), 5243910 (0x500406) | |
Transfer rate | COM3 (230.4 kbits/s) | |
Min. cycle time | 1.5 ms | |
SIO mode support | no | |
Compatible master port type | Class A Class B (use 3-pole adapter or 3-wire cable) |
|
Connection | ||
Connector | M12 connector, 5 pin , A-coded | |
Standard conformity | ||
Degree of protection | DIN EN 60529, IP65, IP67 | |
Communication interface | IEC 61131-9 / IO-Link V1.1.2 | |
Climatic testing | DIN EN 60068-2-78, no moisture condensation | |
Emitted interference | EN 61000-6-4:2007 | |
Noise immunity | EN 61000-6-2:2005 | |
Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms | |
Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 1000 Hz | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product. | |
Ambient conditions | ||
Operating temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Relative humidity | 98 % , no moisture condensation | |
Mechanical specifications | ||
Material | ||
Housing | Zinc plated steel, painted | |
Flange | Aluminum | |
Shaft | Stainless steel | |
Mass | approx. 370 g | |
Rotational speed | max. 12000 min -1 | |
Moment of inertia | < 30 gcm2 | |
Starting torque | < 3 Ncm | |
Shaft load | ||
Axial | 24 N | |
Radial | 198 N | |
Angle offset | ± 0.9 ° | |
Axial offset | ± 0.3 mm static; ± 0,1 mm dynamic | |
Radial offset | ± 0.5 mm static; ± 0,2 mm dynamic |
System | Classcode |
---|---|
ECLASS 13.0 | 27270502 |
ECLASS 12.0 | 27270502 |
ECLASS 11.0 | 27270502 |
ECLASS 10.0.1 | 27270502 |
ECLASS 9.0 | 27270502 |
ECLASS 8.0 | 27270502 |
ECLASS 5.1 | 27270502 |
ETIM 9.0 | EC001486 |
ETIM 8.0 | EC001486 |
ETIM 7.0 | EC001486 |
ETIM 6.0 | EC001486 |
ETIM 5.0 | EC001486 |
UNSPSC 12.1 | 39121527 |
Literature | 언어 | 파일 타입 | 파일 크기 |
---|---|---|---|
Application Report - Absolute Encoder with IO-Link-Interface | ENG | 344 KB |
Product information | 언어 | 파일 타입 | 파일 크기 |
---|---|---|---|
Leaflet UL / Beipackzettel UL | ALL | 127 KB | |
Installation and user instructions for offline parameterization of IO-Link sensors | ENG | 1788 KB | |
Brief Instructions | |||
Instruction leaflet / Beipackzettel | ALL | 256 KB | |
Manuals | |||
Manual ENA**TL-**IO** | ENG | 2448 KB | |
Parameter Information | |||
Brief instructions | ENG | 606 KB | |
Brief instructions | ENG | 603 KB | |
Brief instructions | ENG | 603 KB | |
Brief instructions | ENG | 606 KB |
Certificates | 인증서 번호 | 언어 | 파일 타입 | 파일 크기 |
---|---|---|---|---|
IO-Link Manufacturer Declaration | CERT-5884A | ALL | 145 KB | |
US CA UL | CoC 20190913-E223176 RptRef E223176-20081013 | ALL | 280 KB | |
Declaration of Conformity | ||||
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-7159 | ALL | 248 KB |
Device Description Files/Drivers | Release Info | 파일 타입 | 파일 크기 |
---|---|---|---|
IODD for ENA58TL-R*5-00* series / IODD für ENA58TL-R*5-00* series | V1.01.000 / 2021-08-01 | ZIP | 190 KB |
IODD for ENA58TL-R*5-15* series / IODD für ENA58TL-R*5-15* series | V1.01.000 / 2021-08-01 | ZIP | 191 KB |
IODD for ENA58TL-R*7-00* series / IODD für ENA58TL-R*7-00* series | V1.01.000 / 2021-08-01 | ZIP | 190 KB |
IODD for ENA58TL-R*7-15* series / IODD für ENA58TL-R*7-15* series | V1.01.000 / 2021-08-01 | ZIP | 191 KB |
Add-On instructions for use in Rockwell Automation® Studio 5000 software with all ENA Series IO-Link Encoders and used with ICE1, ICE2, and Allen-Bradley® IO-Link masters. / Add-On-Anweisungen für die Verwendung in der Software Rockwell Automation® Studio 5000 mit allen IO-Link-Drehgebern der ENA-Serie, einschließlich ICE1 und ICE2, sowie den Allen-Bradley® IO-Link-Mastern | March / 2021 | ZIP | 51925 KB |
Software Tools | |||
IO-Link Offline Parameterization Tool / IO-Link Offline-Parametriertool | V1.00.006 / 2022-07-10 | ZIP | 96138 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|