Absolute rotary encoder ENA36IL-S***-J1939

Very small housing
Up to 31 bit overall resolution
CAN bus with SAE J1939 protocol
Free of wear magnetic sampling
High resolution and accuracy

Technical Data
Product Documentation
Design / Simulation
Approvals
관련문서
전문가 상담

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

PDF 파일로 된 데이타 시트 다운로드:

데이타 시트 발췌: 기술 사양 ENA36IL-S***-J1939

General specifications
Detection type		magnetic sampling
Device type		Absolute rotary encoder
Linearity error		≤ ± 0.1 °
UL File Number		E223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product.
Functional safety related parameters
MTTF_d		480 a at 40 °C
Mission Time (T_M)		20 a
L₁₀		40 E-8 revolutions at 20/40 N axial/radial shaft load
Diagnostic Coverage (DC)		0 %
Indicators/operating means
LED green		Operating mode
LED red		wrong baud rate
Electrical specifications
Operating voltage		9 ... 30 V DC (with galvanic isolation)
Power consumption		≤ 1.2 W
Time delay before availability		< 250 ms
Output code		binary code
Code course (counting direction)		adjustable
Interface
Interface type		J1939
Resolution
	Single turn	up to 16 Bit
	Multiturn	up to 15 Bit
	Overall resolution	up to 31 Bit
Transfer rate		min. 20 kBit/s , max. 1 MBit/s
Cycle time		≥ 1 ms
Standard conformity		ISO 11898
Connection
Connector		M12 connector, 5 pin
Cable		∅6 mm, 4 x 2 x 0.14 mm²
Standard conformity
Degree of protection		DIN EN 60529, IP65 or IP54
Climatic testing		DIN EN 60068-2-3, no moisture condensation
Emitted interference		EN 61000-6-4:2007
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 200 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 20 g, 10 ... 1000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product.
Ambient conditions
Operating temperature		cable, flexing: -5 ... 70 °C (23 ... 158 °F), cable, fixed: -30 ... 70 °C (-22 ... 158 °F) connector models: -40 ... 85 °C (-40 ... 185 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		98 % , no moisture condensation
Mechanical specifications
Material
	Housing	nickel-plated steel
	Flange	Aluminum
	Shaft	Stainless steel
Mass		approx. 150 g
Rotational speed		max. 12000 min ^-1
Moment of inertia		30 gcm²
Starting torque		< 3 Ncm
Shaft load
	Axial	20 N
	Radial	40 N
Dimensions
	Diameter	36.5 mm

Classifications

System	Classcode
ECLASS 13.0	27270502
ECLASS 12.0	27270502
ECLASS 11.0	27270502
ECLASS 10.0.1	27270502
ECLASS 9.0	27270502
ECLASS 8.0	27270502
ECLASS 5.1	27270502
ETIM 9.0	EC001486
ETIM 8.0	EC001486
ETIM 7.0	EC001486
ETIM 6.0	EC001486
ETIM 5.0	EC001486
UNSPSC 12.1	39121527

Details: ENA36IL-S***-J1939

Product Documentation: ENA36IL-S***-J1939

Brief Instructions	언어	파일 타입	파일 크기
Instruction leaflet / Beipackzettel	ALL	PDF	883 KB
Manuals
Encoders with J1939 Interface	ENG	PDF	2622 KB

Design / Simulation: ENA36IL-S***-J1939

CAD	언어	파일 타입	파일 크기
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: ENA36IL-S***-J1939

Certificates	인증서 번호	언어	파일 타입	파일 크기
CA UL General Purpose	E223176	ALL	LINK	---
US UL General Purpose	E223176	ALL	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-3162A	ALL	PDF	78 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-7156	ALL	PDF	247 KB

관련문서: ENA36IL-S***-J1939

Accessories

	V19-G-ABG-PG9 Female connector, field-attachable
	Female connector M12 straight A-coded 8-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa

	9404 6*6 Coupling
	Spring disk coupling, Very high torsion spring stiffness, Suitable up to 12.000 rpm, Well misalignment compensation, Vibration- isolating, Electrically insulatingfa

	9409 6*10 Coupling
	Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa

	9409 6*6 Coupling
	Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa

	9410 6*6 Coupling
	Precision coupling, Precision couplingfa

	KW-6/10 Coupling
	Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa

	KW-6/6 Coupling
	Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa

	KW-6/8 Coupling
	Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa

	9109, 6 Measuring wheel
	Measuring wheel for shaft diameter 6 mm, Pimpled rubber coating, 200 mm circumferencefa

	9110, 6 Measuring wheel
	Measuring wheel for shaft diameter 6 mm, Knurled aluminum, 200 mm circumferencefa

	9113, 6 Measuring wheel
	Measuring wheel for shaft diameter 6 mm, Knurled plastic, 200 mm circumferencefa

General Notes Relating to Pepperl+Fuchs Product Information

ENA58IL Magnetic Rotary Encoder – Explore the New Benchmark for Industry Standard Rotary Encoders.

Magnetic Precision. Under any Condition. - Magnetic Encoder Technology by Pepperl+Fuchs

페펄앤드푹스코리아(주)
서울특별시 서초구 서초대로88
6층 (유니온빌딩)
06673 대한민국
대한민국
info@kr.pepperl-fuchs.com
phone +82 2 34819494

Pepperl+Fuchs는 세계 자동화 시장에서 전자기 센서 및 컴포넌트 제조 및 개발의 선두주자입니다. 지속적인 혁신, 오래토록 변치 않는 품질 및 꾸준한 성장이 지난 70년 동안 계속적인 성장을 보장하였습니다. Pepperl+Fuchs의 전세계에 6,300명의 임직원을 보유하고 있으며, 독일, USA, 싱가포르, 헝가리, 인도네시아 및 베트남에 제조 시설을 가지고 있으며, 대부분 ISO9001을 획득하였습니다.