Subrack K-RACK.1.**.*.*.WW.01-Y*******
- Subrack for K-System
- Replacement for subrack of the E-System
- Max. 33 slots for isolators
- Long design (300 mm mounting depth)
- Connection via marshalling patchboards
- Partial and combined assembly possible
- Complete wiring according to customer requirements
- Allows to retain cable routing in the switch cabinet
- No structural changes on the switch cabinet required
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens K-RACK.1.**.*.*.WW.01-Y*******
| Slots | ||
|---|---|---|
| Supply | max. 2 , see section application | |
| Isolators | max. 33 , see section application | |
| Supply | ||
| Connection | isolator power supply via marshalling patchboards or Power Rail | |
| Nominal voltage | 24 V DC , in consideration of rated voltage of used isolators | |
| Fusing | max. 4 A , in consideration of rated voltage of used isolators | |
| Redundancy | redudnancy possible, depends on the used power feed module | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61439-1:2011 (J.9.4.2 b) , EN 61439-2:2011 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN IEC 63000:2018 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Connection | ||
| Field side | marshalling patchboards | |
| Control side | marshalling patchboards | |
| Supply | marshalling patchboards or Power Rail | |
| Core cross section | field side: max. 2.5 mm2 control side: max. 2.5 mm2 internal signal wiring: 0.25 mm2 supply: max. 1.5 mm2 |
|
| Material | ||
| Housing | galvanized steel | |
| Surface | galvanized , vibratory finishing | |
| Mass | approx. 4 kg , without modules | |
| Dimensions | 485 mm x 132 mm x 339 mm (W x H x D) | |
| Height | 132 mm | |
| Width | 485 mm | |
| Depth | 339 mm | |
| Mounting | slotted hole 8 x 10 mm | |
| Grounding | via front fastening M8 , via lateral fastening on both sides M5 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27219090 |
| ECLASS 12.0 | 27219090 |
| ECLASS 11.0 | 27219290 |
| ECLASS 10.0.1 | 27219290 |
| ECLASS 9.0 | 27219290 |
| ECLASS 8.0 | 27219290 |
| ECLASS 5.1 | 27279201 |
| ETIM 9.0 | EC003015 |
| ETIM 8.0 | EC003015 |
| ETIM 7.0 | EC003015 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 32101514 |
Details: K-RACK.1.**.*.*.WW.01-Y*******
Product Documentation: K-RACK.1.**.*.*.WW.01-Y*******
| Safety and Security Documentation | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Handleiding | HOL | 134 KB |
Approvals: K-RACK.1.**.*.*.WW.01-Y*******
| Declaration of Conformity | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4835 | ALL | 264 KB |
Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.
Pepperl+Fuchs N.V.
Metropoolstraat 11
2900 Schoten / Anvers
BELGIË
BTW BE 0436.097.152, RPR Antwerpen, afd. Antw.
sales@be.pepperl-fuchs.com
+32 3 644 25 00
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.