Solenoid Driver KFD2-VM-Ex1.35.L

1-channel isolated barrier
24 V DC supply (Power Rail)
Output 15.3 V DC at 17 mA
3 logic inputs with AND/OR logic
Service port for isolator function test

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Aanverwante producten
Vraag het aan een Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

De complete datasheet als PDF downloaden:

Technische gegevens KFD2-VM-Ex1.35.L

General specifications
Signal type		Digital Output
Supply
Connection		Power Rail or terminals 11+, 12-
Rated voltage		20 ... 30 V DC
Ripple		≤ 10 %
Rated current		≤ 52 mA
Power dissipation		typ. 1.2 W
Power consumption		< 1.5 W
Input
Connection side		control side
Connection		terminals 7+, 8+, 9+
Signal level		1-signal: 15 ... 30 V DC ; input current: approx. 2.3 mA at 24 V DC 0-signal: 0 ... 5 V DC or open input
Response delay		5 ... 30 ms (typical 10 ms)
Output
Connection side		field side
Internal resistor		max. 410 Ω
Current		typ. 18 mA
Voltage		typ. 16 V
Limit		current I_E: ≥ 17 mA; typ. 18 mA voltage U_E: ≥ 15.3 V; typ. 16 V
Open loop voltage		min. 22.3 V
Connection		terminals 4+, 6-
Output current		17 mA
Output signal		These values are valid for the rated operating voltages from 20 ... 30 V DC.
Transfer characteristics
Switching frequency		15 Hz
Galvanic isolation
Input/power supply		not available
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2012
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 120 g
Dimensions		20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		PTB 00 ATEX 2132
	Marking	II (1)GD [Ex ia] IIC [circuit(s) in zone 0/1/2]
	Output	Ex ia
	Voltage	25.2 V DC
	Current	67.2 mA
	Power	423.5 mW (linear characteristic)
Supply
	Maximum safe voltage	253 V AC/125 V DC without jumper 10-11, 60 V with jumper 10-11 (Attention! U_m is no rated voltage.)
Input
	Maximum safe voltage	60 V (Attention! U_m is no rated voltage.)
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Output/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210101
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: KFD2-VM-Ex1.35.L

Informative Literature: KFD2-VM-Ex1.35.L

Literature	Taal	Bestandstype	Bestandsgrootte
Application Report - Biological Cleaning of Wastwater and Secondary Sedimentation Stage	ENG	PDF	566 KB
Application Report - Energy Generation in Wastwater Treatment Plants	ENG	PDF	532 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Sand Trap and Preliminary Sedimentation Stage	ENG	PDF	448 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB
Application Report - Sicherer Brennstofftransport in Kohlekraftwerken	ENG	PDF	391 KB
Application Report - Water Inlet in Wastewater Treatment Plants	ENG	PDF	526 KB

Product Documentation: KFD2-VM-Ex1.35.L

Product information	Taal	Bestandstype	Bestandsgrootte
Application Guideline Solenoid Drivers	ENG	PDF	734 KB
Safety and Security Documentation
Handleiding	HOL	PDF	67 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KFD2-VM-Ex1.35.L

CAD	Taal	Bestandstype	Bestandsgrootte
CAD 3-D / CAD 3-D	ALL	STP	105 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	56 KB

Approvals: KFD2-VM-Ex1.35.L

Certificates	Certificaatnummer	Taal	Bestandstype	Bestandsgrootte
Europe PTB ATEX Category (1) GD	PTB 00 ATEX 2132	ALL	PDF	554 KB
Pepperl+Fuchs Functional Safety Assessment	FS-0065PF-20A	ALL	PDF	69 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-1949A	ALL	PDF	52 KB

Aanverwante producten: KFD2-VM-Ex1.35.L

Matching System Components

	KFD2-EB2 Power Feed Module
	Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indicationpa

	UPR-03 Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-S Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-M Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chainspa

	K-DUCT-BU Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

	K-DUCT-BU-UPR-03 Profile Rail
	Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa

Accessories

	KF-ST-5GN Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa

	KF-ST-5BU Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces bluepa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

Algemene opmerkingen met betrekking tot de informatie in de Pepperl+Fuchs productdocumentatie

Quick Links

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs N.V.
Metropoolstraat 11
2900 Schoten / Anvers
BELGIË
BTW BE 0436.097.152, RPR Antwerpen, afd. Antw.
sales@be.pepperl-fuchs.com
phone +32 3 644 25 00

Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.