Distance sensor OMR50M-R1000-SSI-V1V1B

Maximum measurement accuracy
Switchable SSI/RS-422 interface
Red laser as the light emitter
Display and keypad for parameter settings
Compact and space-saving design

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Aanverwante producten
Vraag het aan een Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

De complete datasheet als PDF downloaden:

Technische gegevens OMR50M-R1000-SSI-V1V1B

Productbeschrijving
Distance sensor for positioning tasks accurate to the millimeter, PRT, measuring range up to 50 m, SSI/RS-422 interface, M12 plug

General specifications
Measuring range		0.3 ... 50 m
Reference target		REF-500MMx500MM (Foil reflector 500 mm x 500 mm) REF-250MMx250MM (Film reflector 250 mm x 250 mm)
Light source		laser diode
Light type		modulated visible red light
Laser nominal ratings
	Note	LASER LIGHT , DO NOT STARE INTO BEAM
	Laser class	1
	Wave length	660 nm
	Beam divergence	< 5 mrad
	Pulse length	5 ns
	Repetition rate	300 kHz
	max. pulse energy	< 2 nJ
Measuring method		Pulse Ranging Technology (PRT)
Max. Motion velocity		15 m/s
Diameter of the light spot		< 25 cm at 50 m
Ambient light limit		> 80000 Lux
Resolution		0.1 mm , adjustable
Temperature influence		0.03 mm/K
Functional safety related parameters
MTTF_d		> 100 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Function indicator		6 LEDs
Control elements		Control panel (4 membrane keys) for setting parameters
Parameterization indicator		Illuminated display for displaying measured values and parameterization
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		625 mA (10 V) ... 250 mA (24 V) ... 220 mA (30 V)
Time delay before availability		< 1 s
Interface
Interface type		SSI
Monoflop time		20 µs
Clock frequency		0.1 ... 1 MHz
Interface 1
Interface type		RS-422
Read out rate		4.8 ... 115.2 kBit/s
Input/Output
Input/output type		2 inputs/outputs, independent configuration, short-circuit protected, reverse polarity protected
Output
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Voltage drop		≤ 1.5 V DC
Conformity
Product standard		EN 60947-5-2
Laser safety		EN 60825-1:2014
Measurement accuracy
Measured value output		1 ms
Average data age		3 ms , 6 ms , 12 ms , 25 ms , adjustable
Absolute accuracy		typ. ± 2.5 mm
Repeat accuracy		< 1 mm
Approvals and certificates
Protection class		III (rated insulation voltage 50 V)
UL approval		cULus Listed, Class 2 Power Source, Type 1 enclosure
FDA approval		IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient conditions
Ambient temperature		-10 ... 60 °C (14 ... 140 °F)
Storage temperature		-40 ... 75 °C (-40 ... 167 °F)
Relative humidity		95 % , no moisture condensation
Mechanical specifications
Degree of protection		IP67
Connection		4-pin, M12x1 connector, A-coded (supply) , 5-pin, M12x1 connector, B-coded (SSI)
Material
	Housing	ABS / PC
	Optical face	PMMA , hard coated
Mass		approx. 300 g
Dimensions
	Height	106.6 mm
	Width	55 mm
	Depth	80.6 mm

Classifications

System	Classcode
ECLASS 13.0	27270916
ECLASS 12.0	27270916
ECLASS 11.0	27270801
ECLASS 10.0.1	27270801
ECLASS 9.0	27270801
ECLASS 8.0	27270801
ECLASS 5.1	27270801
ETIM 9.0	EC001825
ETIM 8.0	EC001825
ETIM 7.0	EC001825
ETIM 6.0	EC001825
ETIM 5.0	EC001825
UNSPSC 12.1	41111613

Details: OMR50M-R1000-SSI-V1V1B

Informative Literature: OMR50M-R1000-SSI-V1V1B

Literature	Taal	Bestandstype	Bestandsgrootte
Product Information - R1000 Distance Sensor	ENG	PDF	504 KB

Product Documentation: OMR50M-R1000-SSI-V1V1B

Manuals	Taal	Bestandstype	Bestandsgrootte
Manual	ENG	PDF	1164 KB
Protocol Information
R1000 SerialLink protocol specification / R1000 SerialLink Protokollbeschreibung	ALL	PDF	2808 KB
Software Information
OMRxxx-R1000 firmware v1.10 release notes / OMRxxx-R1000 Firmware v1.10 Versionshinweise	ALL	PDF	645 KB

Design / Simulation: OMR50M-R1000-SSI-V1V1B

CAD	Taal	Bestandstype	Bestandsgrootte
CAD Portal / CAD Portal	ALL	LINK	---
CAD-files 3-D / CAD-Dateien 3-D	ALL	STP	3525 KB
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	70 KB

Approvals: OMR50M-R1000-SSI-V1V1B

Certificates	Certificaatnummer	Taal	Bestandstype	Bestandsgrootte
Canada USA UL Ordinary Location	E87056	ALL	LINK	---
EU Pepperl+Fuchs	PF08CERT1244	ALL	PDF	503 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-5353A	ALL	PDF	225 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-6954	ALL	PDF	223 KB

Software: OMR50M-R1000-SSI-V1V1B

Device Description Files/Drivers	Vrijgave-informatie	Bestandstype	Bestandsgrootte
Add-On instruction when using EtherNet/IP protocol and AB PLC with Studio 5000 V35. R1000 SerialLink protocol used with DeviceMaster. / Add-On-Anweisung bei Verwendung des EtherNet/IP-Protokolls und AB PLC mit Studio 5000 V35. R1000 SerialLink-Protokoll mit DeviceMaster.	6/2023	ZIP	25953 KB

Aanverwante producten: OMR50M-R1000-SSI-V1V1B

Accessories

	V15-G-PG9 Female connector, field-attachable
	Female connector M12 straight A-coded 5-pin, for cable diameter 6 - 8 mm, field-attachablefa

	V15-W-PG9 Female connector, field-attachable
	Female connector M12 angled A-coded 5-pin, for cable diameter 6 - 8 mm, field-attachablefa

	V1-G-BK Female connector, field-attachable
	Female connector M12 straight A-coded 4-pin, for cable diameter 4 - 6 mm, field-attachablefa

	V1-W-BK Female connector, field-attachable
	Female connector M12 angled A-coded 4-pin, for cable diameter 4 - 6 mm, field-attachablefa

	V15B-G-ABG-PG9 Female connector, field-attachable
	Female connector M12 straight B-coded 5-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa

	V15B-G-15M-LIHCH-TP Female connector
	SSI bus cable, B-coded M12, 5-pin cablefa

	V15B-W-15M-LIHCH-TP Female connector
	SSI bus cable, B-coded M12, 5-pin cablefa

	Schutzkappe LS610 Zubehoer Mounting aid
	M12 protective cap set (connector + socket) for series LS610 / LS611fa

	OFR-250/250 Reflective tape
	Reflective tapefa

	OFR-500/500 Reflective tape
	Reflective tapefa

	OFR-1000/1000 Reflective tape
	Reflective tape 1000 mm x 1000 mmfa

	REF-500MMx500MM Reflective tape
	Reflective tape on metal plate 500 mm x 500 mmfa

	OMH-R1000-01 Mounting aid
	Mounting bracket , Mounting bracket, Simple and fast mounting, Supplied with mounting materialfa

	OMH-R1000-02 Mounting aid
	Mounting aid for R1000 series, Quick clamp and adjustment system, Simple installation and exact settingfa

	REF-250MMx250MM Reflective tape
	Reflective tape on metal plate 250 mm x 250 mmfa

	OMH-R1000-03 Accessory photo
	Deviation mirror, Simple and fast mounting, 90° beam deflection, Can be combined with adjustment devicefa

	OMH-R1000-05 Accessory photo
	Mounting aid for R1000 series, For compatibility with mounting VDM100fa

	OMH-R1000-04 Accessory photo
	Mounting aid for R1000 series, Simple and fast mountingfa

Algemene opmerkingen met betrekking tot de informatie in de Pepperl+Fuchs productdocumentatie

Pepperl+Fuchs N.V.
Metropoolstraat 11
2900 Schoten / Anvers
BELGIË
BTW BE 0436.097.152, RPR Antwerpen, afd. Antw.
sales@be.pepperl-fuchs.com
phone +32 3 644 25 00

Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.