2-D LiDAR Sensor OMD25M-R2000-B23-V1V1D-SD-1L
- High operating range
- High angle resolution
- Infrared light
- Measuring method PRT (Pulse Ranging Technology)
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens OMD25M-R2000-B23-V1V1D-SD-1L
| Productbeschrijving |
|---|
| R2000 SD, 2-D LiDAR sensor for simple measurement tasks and positioning, measuring range to object up to 25 m, Ethernet |
| General specifications | ||
|---|---|---|
| Measuring range | 0.1 ... 10 m (black 10%) 0.1 … 25 m (white 90 %) 0.1 … 25 m (reflector) Min. reflectivity 2.5% |
|
| Light source | laser diode | |
| Light type | modulated infrared light | |
| Laser nominal ratings | ||
| Note | LASER RADIATION , DO NOT STARE INTO BEAM | |
| Laser class | 1 | |
| Wave length | 905 nm | |
| Beam divergence | transversal 2 mrad , longitudinal 10 mrad | |
| Pulse length | 5 ns | |
| Repetition rate | 72 kHz | |
| max. pulse energy | < 94 nJ | |
| Measuring method | Pulse Ranging Technology (PRT) | |
| Scan rate | 10 ... 30 s-1 | |
| Scanning angle | 360° | |
| Diameter of the light spot | 25 mm x 105 mm at 10 m | |
| Ambient light limit | 80000 Lux | |
| Resolution | 1 mm | |
| Functional safety related parameters | ||
| MTTFd | 75 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Data flow indicator | LED yellow: active ethernet LED green: Ethernet link |
|
| Function indicator | LED red: fault LED yellow: Q1 + Q2 |
|
| Control elements | 2 Button | |
| Parameterization indicator | 24 x 252 pixels , red | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Ripple | 10 % within the supply tolerance | |
| No-load supply current | ≤ 400 mA / 24 V DC | |
| Power consumption | < 10 W | |
| Time delay before availability | < 40 s | |
| Interface | ||
| Interface type | Fast Ethernet, 2 switching outputs | |
| Protocol | HTTP , TCP/IP and UDP/IP | |
| Input/Output | ||
| Input/output type | 2 Outputs , Independently configurable , short circuit/reverse polarity protected | |
| Output | ||
| Switching threshold | low: Ua < 1 V, high: Ua > Ub - 2 V |
|
| Switching current | 100 mA per output | |
| Conformity | ||
| Laser safety | EN 60825-1:2014 | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Product standard | IEC 60947-5-2 | |
| Shock and impact resistance | EN 60068-2-6 EN 60068-2-27 | |
| Measurement accuracy | ||
| Measuring speed | 72000 measurements per second | |
| Measured value noise | typ. ± 20 mm (1 sigma) |
|
| Angle resolution | 0.05 ° | |
| Absolute accuracy | typ. ± 40 mm | |
| Repeat accuracy | < 12 mm | |
| Approvals and certificates | ||
| Protection class | III (operating voltage 50 V) | |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) | |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Relative humidity | 95 % , no moisture condensation | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | 4-pin, M12x1 connector, standard (supply) , 8-pin, M12x1 connector, A-coded (MultiPort) , 4-pin, M12x1 socket, D-coded (LAN) |
|
| Material | ||
| Housing | ABS + PC + Aluminum | |
| Optical face | PMMA | |
| Mass | approx. 0.8 kg | |
| Dimensions | ||
| Height | 116.5 mm | |
| Width | 106 mm | |
| Length | 106 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270913 |
| ECLASS 12.0 | 27270913 |
| ECLASS 11.0 | 27270913 |
| ECLASS 10.0.1 | 27270913 |
| ECLASS 9.0 | 27270913 |
| ECLASS 8.0 | 27270913 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details: OMD25M-R2000-B23-V1V1D-SD-1L
Informative Literature: OMD25M-R2000-B23-V1V1D-SD-1L
Product Documentation: OMD25M-R2000-B23-V1V1D-SD-1L
| Brief Instructions | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Brief Instructions - OMD*R2000 | ENG | 803 KB | |
| Manuals | |||
| Manual | ENG | 4423 KB | |
| Protocol Information | |||
| R2000 Ethernet communication protocol / R2000 Ethernet Protokollbeschreibung | ALL | 4535 KB | |
| Software Information | |||
| OMDxxx-R2000 Firmware v1.62 release notes / OMDxxx-R2000 Firmware v1.62 Versionshinweise | ALL | 395 KB | |
Design / Simulation: OMD25M-R2000-B23-V1V1D-SD-1L
| CAD | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2250 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
| CAE | |||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 25 KB |
Approvals: OMD25M-R2000-B23-V1V1D-SD-1L
| Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | UL-CA-L87056-31-91205102-0 / UL-US-L87056-11-91205102-0 | ALL | 545 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0074G | ALL | 308 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-5254 | ALL | 229 KB | |
Software: OMD25M-R2000-B23-V1V1D-SD-1L
| Device Description Files/Drivers | Vrijgave-informatie | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| DTM / DTM | v1.4.0.1 | ZIP | 5451 KB |
| Software Tools | |||
| PACTware 5.0 / PACTware 5.0 | 5.0.5.31 | ZIP | 44203 KB |
| ROS driver / ROS-Treiber | 6 2023 | LINK | --- |
Aanverwante producten: OMD25M-R2000-B23-V1V1D-SD-1L
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Ontdek de SmartRunner-laserprofielsensoren met een unieke combinatie van lichtsectietechnologie en een 2D-vision sensor met ingebouwde LED’s …
De R2000 biedt betrouwbare en uiterst nauwkeurige meetresultaten, met een aaneensluitend 360° zicht rondom...
Meten in 3D of op hoge snelheid: De R2300-serie biedt de geschikte LiDAR-sensor voor elke uitdaging. Meer informatie over de voordelen, de technologie en de toepassingsmogelijkheden...
Voor het eerst is er een consistente reeks sensoroplossingen beschikbaar die optische functieprincipes en innovatieve technologieën in identieke behuizingen verenigt. Gebruikers genieten van een uniform bedieningsconcept voor het volledige portfolio. Ontdek de R100-, R101-, R103-, R200- en R201-series...
De afstandssensoren met geavanceerde technologieën bieden de hoogste mate van nauwkeurigheid en betrouwbaarheid ...
Pepperl+Fuchs N.V.
Metropoolstraat 11
2900 Schoten / Anvers
BELGIË
BTW BE 0436.097.152, RPR Antwerpen, afd. Antw.
sales@be.pepperl-fuchs.com
+32 3 644 25 00
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.