Niet beschikbaar voor verkoop
Distance sensor VDM28-50-R/73c/136
- Retroreflective laser distance sensor
- Measuring method PRT (Pulse Ranging Technology)
- Accurate, clear, and reproducible measuring results
- Red laser as the light emitter
- Version with laser class 2
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens VDM28-50-R/73c/136
| Productbeschrijving |
|---|
| Universal distance sensor, measurement to reflector, measuring method PRT, 50 m detection range, red laser light, laser class 2, push-pull output, M12 plug |
| General specifications | ||
|---|---|---|
| Measuring range | 0.2 ... 50 m | |
| Reference target | OFR-100/100 | |
| Light source | laser diode typ. service life 85,000 h at Ta = +25 °C |
|
| Light type | modulated visible red light | |
| Laser nominal ratings | ||
| Note | LASER LIGHT , DO NOT STARE INTO BEAM | |
| Laser class | 2 | |
| Wave length | 660 nm | |
| Beam divergence | 1 mrad | |
| Pulse length | 5 ns | |
| Repetition rate | 250 kHz | |
| max. pulse energy | < 4 nJ | |
| Angle deviation | max. ± 2° | |
| Measuring method | Pulse Ranging Technology (PRT) | |
| Diameter of the light spot | < 50 mm at a distance of 50 m at 20 °C | |
| Ambient light limit | 50000 Lux | |
| Temperature influence | typ. ≤ 0.25 mm/K | |
| Functional safety related parameters | ||
| MTTFd | 200 a | |
| Mission Time (TM) | 10 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | 2 LEDs yellow for switching state | |
| Teach-in indicator | Teach-In: LED green/yellow equiphase flashing; 2.5 Hz Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz |
|
| Control elements | 5-step rotary switch for operating modes selection (threshold setting and operating modes) | |
| Control elements | Switch for setting the threshold values | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC , class 2 | |
| Ripple | 10 % within the supply tolerance | |
| No-load supply current | ≤ 70 mA / 24 V DC | |
| Time delay before availability | 1.5 s | |
| Output | ||
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Switching frequency | 50 Hz | |
| Response time | 10 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Laser safety | IEC 60825-1:2007 | |
| Measurement accuracy | ||
| Absolute accuracy | ± 25 mm | |
| Repeat accuracy | < 5 mm | |
| Approvals and certificates | ||
| Protection class | II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 | |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 | |
| Ambient conditions | ||
| Ambient temperature | -30 ... 50 °C (-22 ... 122 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | 4-pin, M12 x 1 connector | |
| Material | ||
| Housing | Plastic ABS | |
| Optical face | PMMA | |
| Mass | 90 g | |
| Dimensions | ||
| Height | 88 mm | |
| Width | 25.8 mm | |
| Depth | 54.6 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270916 |
| ECLASS 12.0 | 27270916 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details: VDM28-50-R/73c/136
Product Documentation: VDM28-50-R/73c/136
| Brief Instructions | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 759 KB |
Design / Simulation: VDM28-50-R/73c/136
| CAD | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2222 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: VDM28-50-R/73c/136
| Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | E87056 | ALL | LINK | --- |
| EU Pepperl+Fuchs | PF08CERT1244 | ALL | 503 KB | |
| IO-Link Manufacturer Declaration | PF 13 CERT 2631 | ALL | 275 KB | |
| Declaration of Conformity | ||||
| EU-Declaration of conformity / EU-Konformitätserklärung | DOC-0845C | ALL | 308 KB | |
| UK-Declaration of conformity / UK-Konformitätserklärung | DOC-5273 | ALL | 297 KB | |
Aanverwante producten: VDM28-50-R/73c/136
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Ontdek de SmartRunner-laserprofielsensoren met een unieke combinatie van lichtsectietechnologie en een 2D-vision sensor met ingebouwde LED’s …
De R2000 biedt betrouwbare en uiterst nauwkeurige meetresultaten, met een aaneensluitend 360° zicht rondom...
Meten in 3D of op hoge snelheid: De R2300-serie biedt de geschikte LiDAR-sensor voor elke uitdaging. Meer informatie over de voordelen, de technologie en de toepassingsmogelijkheden...
Voor het eerst is er een consistente reeks sensoroplossingen beschikbaar die optische functieprincipes en innovatieve technologieën in identieke behuizingen verenigt. Gebruikers genieten van een uniform bedieningsconcept voor het volledige portfolio. Ontdek de R100-, R101-, R103-, R200- en R201-series...
De afstandssensoren met geavanceerde technologieën bieden de hoogste mate van nauwkeurigheid en betrouwbaarheid ...
Pepperl+Fuchs N.V.
Metropoolstraat 11
2900 Schoten / Anvers
BELGIË
BTW BE 0436.097.152, RPR Antwerpen, afd. Antw.
sales@be.pepperl-fuchs.com
+32 3 644 25 00
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.