Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Productbeschrijving |
---|
Laser light sensor for profile matching; Comparison of up to 32 height profiles; Output of X/Z offset; Resolution: 1280 x 960 pixels; Measuring range: X = 60 ... 300 mm, Z = 100 ... 700 mm; Scan rate: 15 s-1; 2 digital outputs; RS-485 interface |
General specifications | ||
---|---|---|
Measurement range | X = 60 ... 300 mm ; Z = 100 ... 700 mm | |
Light source | laser diode | |
Light type | red laser + Integrated LED lightning red 650 nm | |
Laser nominal ratings | ||
Note | VISIBLE LASER RADIATION , DO NOT STARE INTO BEAM DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS |
|
Laser class | 1 | |
Wave length | Measuring laser: 660 nm | |
Pulse length | Measuring laser: 0.5 ms | |
Maximum optical power output | Measuring laser: 15 mW | |
Laser monitoring | The safety system switches off the laser when the laser current is too high | |
Scan rate | 15 s-1 | |
Resolution | X>0.44 mm; Z>0.4 mm at 60 mm distance X>1.0 mm; Z>2.0 mm at 400 mm distance X>1.8 mm; Z>11.1 mm at 700 mm distance |
|
Functional safety related parameters | ||
MTTFd | 20 a | |
Mission Time (TM) | 10 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
Operation indicator | LED green | |
Diagnostics indicator | LED yellow / red | |
Function indicator | Trigger: LED yellow ; object detected : LED red / green | |
Control elements | 2 push-buttons | |
Electrical specifications | ||
Operating voltage | 24 V ± 20 % , PELV | |
No-load supply current | max. 250 mA | |
Power consumption | max. 6 W , Outputs without load | |
Interface | ||
Interface type | RS 485 interface | |
Physical | Switchable terminal resistor | |
Protocol | binary code | |
Transfer rate | 38400 ... 230400 Bit/s | |
Input | ||
Input voltage | 24 V | |
Number/Type | External triggering + 1 Input | |
Switching threshold | low: < 2.5 V, high: > 8 V | |
Output | ||
Number/Type | 2 digital outputs | |
Switching type | PNP | |
Switching voltage | 24 V | |
Switching current | 150 mA each output | |
Compliance with standards and directives | ||
Standard conformity | ||
Noise immunity | EN 61000-6-2:2005 | |
Emitted interference | EN 61000-6-4:2007/A1:2011 | |
Degree of protection | EN 60529 | |
Shock and impact resistance | EN 60068-2-27:2009 | |
Laser class | IEC 60825-1:2007 | |
Approvals and certificates | ||
UL approval | cULus Listed, Type 1 enclosure | |
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Approvals | CE | |
Ambient conditions | ||
Operating temperature | -20 ... 45 °C (-4 ... 113 °F) , (noncondensing; prevent icing on the lens!) | |
Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
Mechanical specifications | ||
Degree of protection | IP67 | |
Connection | 8-pin, M12 x 1 connector ( supply + RS485 + Inputs/Outputs ) ; can be rotated 90° ; Grounding : Grounding clip for PCV system | |
Material | ||
Housing | PC/ABS | |
Optical face | Plastic pane | |
Mass | approx. 125 g | |
Tightening torque, fastening screws | max. 2 Nm | |
Dimensions | ||
Height | 85 mm | |
Width | 38 mm | |
Depth | 55 mm | |
General information | ||
Note | Security Instructions: |
System | Classcode |
---|---|
ECLASS 13.0 | 27270916 |
ECLASS 12.0 | 27270916 |
ECLASS 11.0 | 27270801 |
ECLASS 10.0.1 | 27270801 |
ECLASS 9.0 | 27270801 |
ECLASS 8.0 | 27270801 |
ECLASS 5.1 | 27270801 |
ETIM 9.0 | EC001825 |
ETIM 8.0 | EC001825 |
ETIM 7.0 | EC001825 |
ETIM 6.0 | EC001825 |
ETIM 5.0 | EC001825 |
UNSPSC 12.1 | 41111613 |
Literature | Taal | Bestandstype | Bestandsgrootte |
---|---|---|---|
Application Report - Automatic Component Inspection in Car Body Manufacturing | ENG | 269 KB | |
Application Report - Automatic Detection of Vibration Dampers | ENG | 352 KB | |
Application Report - Ensuring Reliability in Ready-Meal Production | ENG | 208 KB | |
Application Report - Reliable Detection of Fasteners in Automotive Manufacturing | ENG | 298 KB | |
Application Report - Reliable Profile Camparison on Skids | ENG | 365 KB | |
Application Report - Uninterrupted Material Feed in Production Plants | ENG | 213 KB | |
Product Information - Laser Profil Sensors with SmartRunner Technology | ENG | 2700 KB |
Manuals | Taal | Bestandstype | Bestandsgrootte |
---|---|---|---|
Manual | ENG | 4136 KB |
CAD | Taal | Bestandstype | Bestandsgrootte |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 8066 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
CAE | |||
CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 59 KB |
Declaration of Conformity | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
---|---|---|---|---|
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3518F | ALL | 39 KB | |
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6621 | ALL | 224 KB |
Software Tools | Vrijgave-informatie | Bestandstype | Bestandsgrootte |
---|---|---|---|
Software Vision Configurator / Software Vision Configurator | V6.6.2 | ZIP | 31588 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
Voor het eerst is er een consistente reeks sensoroplossingen beschikbaar die optische functieprincipes en innovatieve technologieën in identieke behuizingen verenigt. Gebruikers genieten van een uniform bedieningsconcept voor het volledige portfolio. Ontdek de R100-, R101-, R103-, R200- en R201-series...
De afstandssensoren met geavanceerde technologieën bieden de hoogste mate van nauwkeurigheid en betrouwbaarheid ...