Active infrared scanner DoorScan-DS-4P-1600
- Moving presence sensor for automatic doors
- SIL 2, certified in accordance with DIN 18650/EN 16005
- Exceptional detection reliability
- Reliable operation with all floor coverings
- Complete protection up to the wall without sensor shutoff
- Additional protection of the main and secondary closing edges
- Tool-free module mounting using snap-in mechanism
- Switchable NPN or PNP outputs
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens DoorScan-DS-4P-1600
| Productbeschrijving |
|---|
| Light curtain for individual protection for automatic doors in accordance with DIN 18650/EN 16005, complete system for a door measuring up to 1600 mm wide, NPN output |
| General specifications | ||
|---|---|---|
| Detection range min. | 0 ... 1500 mm | |
| Detection range max. | 0 ... 3500 mm (Upright CA test body) | |
| Sensing range | 1400 mm at installation height of 2100 mm | |
| Light source | IRED 850 nm | |
| Black-white difference (6 %/90 %) | < 2 % at 2000 mm sensor range | |
| Number of beams | 20 | |
| Operating mode | Background evaluation | |
| Diameter of the light spot | 8 cm at 2000 mm sensor range | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Performance level (PL) | PL d | |
| Category | Cat. 2 | |
| MTTFd | 112.7 a | |
| Mission Time (TM) | 10 a | |
| Indicators/operating means | ||
| Function indicator | Receiver: Red LED: detection, operating reserve, fault code Interface: Red LED: detection, operating reserve, fault code Yellow LED: teach status Green LED: blank status Green LED: DIP switch status |
|
| Control elements | Teach-In key , DIP switch for selection of operating modes | |
| Electrical specifications | ||
| Operating voltage | 24 V DC +/- 20 % | |
| No-load supply current | max. 320 mA | |
| Power consumption | 7.7 W | |
| Input | ||
| Test input | high level ≥ 15 V low level ≤ 2 V | |
| Control input | Standby active at U = 11 V DC at 30 V DC | |
| Output | ||
| Switching type | light-on |
|
| Signal output | switchable NPN or PNP , short-circuit protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Response time | ≤ 52 ms ≤ 200 ms in boost operating mode |
|
| Conformity | ||
| Functional safety | ISO 13849-1 ; EN 61508 part1-4 | |
| Product standard | EN 12978 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) | |
| Mechanical specifications | ||
| Housing length L | 1600 mm | |
| Mounting height | max. 3500 mm | |
| Degree of protection | IP54 (when mounted) | |
| Connection | Plug-in terminal with 6-wire connection cable | |
| Material | ||
| Housing | Aluminum / PA | |
| Optical face | PC (Polycarbonate) | |
| Mass | approx. 2760 g | |
| Dimensions | (W x H x D) : 42 mm x 1600 mm x 37 mm | |
| Height | 42 mm | |
| Depth | 37 mm | |
| Length | 1600 mm | |
| General information | ||
| Scope of delivery | Sensor system for hinge side and leading edge side (4 emitter and receiver modules each, 1 interface module, connecting cable, 2 housing profiles and optical covers each, 4 end caps) | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270913 |
| ECLASS 12.0 | 27270913 |
| ECLASS 11.0 | 27270913 |
| ECLASS 10.0.1 | 27270913 |
| ECLASS 9.0 | 27270913 |
| ECLASS 8.0 | 27270913 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC002550 |
| ETIM 8.0 | EC002550 |
| ETIM 7.0 | EC002550 |
| ETIM 6.0 | EC002550 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Details: DoorScan-DS-4P-1600
Product Documentation: DoorScan-DS-4P-1600
| Manuals | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Manual | ENG | 2756 KB |
Design / Simulation: DoorScan-DS-4P-1600
| CAD | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2259 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: DoorScan-DS-4P-1600
| Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| EU TUV Nord EC-Type Exam. Certificate Functional Safety | 44 205 13 095719 | ALL | 89 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0115F | ALL | 480 KB | |
Aanverwante producten: DoorScan-DS-4P-1600
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Honderden producten met een SIL-/ PL-classificatie, gratis tools en brochures in één locatie: de "Functional Safety Hub" is uw startpunt voor al uw veiligheidsfuncties.
The largest portfolio of its kind: K-System components and systems are established in process industries around the world. Learn more!
Pepperl+Fuchs N.V.
Metropoolstraat 11
2900 Schoten / Anvers
BELGIË
BTW BE 0436.097.152, RPR Antwerpen, afd. Antw.
sales@be.pepperl-fuchs.com
+32 3 644 25 00
© 2024 Alle rechten voorbehouden.
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.