Thru-beam sensor INNO-COM-10M-E3-V31-SET
- Sensing range up to 10 m
- Self-monitoring (type 4 according to IEC/EN 61496-1)
- Red transmission light
- Clearly visible LED functional display and pre-fault indicator on the receiver
- Sturdy housing
- Operation on control units of SB4 (SafeBox)
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens INNO-COM-10M-E3-V31-SET
| Productbeschrijving |
|---|
| INNO-COM thru-beam sensor |
| System components | ||
|---|---|---|
| Emitter | INNO-SAFE-T | |
| Receiver | INNO-SAFE-R | |
| General specifications | ||
| Effective detection range | 0.5 ... 10 m | |
| Threshold detection range | 14 m | |
| Number of protective field beams | 1 | |
| Light source | IRED | |
| Light type | modulated infrared light 850 nm | |
| Safety type according to IEC/EN 61496 | 4 | |
| Marking | CE | |
| Opening angle | ± 4 ° | |
| Optical face | frontal | |
| Ambient light limit | 100000 Lux | |
| Indicators/operating means | ||
| Operation indicator | Emitter: LED green |
|
| Function indicator | Emitter: LED green ( off in test mode ) Receiver: LED red, light with free light beam |
|
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Operating current | Emitter: 30 mA Receiver: 15 mA |
|
| Output | ||
| Output type | PNP | |
| Switching type | light-on | |
| Signal output | max. 30 ... 40 mA | |
| Short-circuit-proof | yes | |
| Energized/De-energized delay | typ. 100 ms | |
| Response time | ≤ 2.2 ms | |
| Conformity | ||
| Product standard | EN 61000-6-2, EN 61000-6-3 | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 55 °C (-13 ... 131 °F) | |
| Storage temperature | -25 ... 75 °C (-13 ... 167 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 according to EN 60529 | |
| Connection | M8 connector, 4-pin | |
| Material | ||
| Housing | ABS impact resistant , V0 according UL94 | |
| Mass | per 12 g | |
| Dimensions | ||
| Height | 48 mm | |
| Width | 12 mm | |
| Depth | 12 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details: INNO-COM-10M-E3-V31-SET
Aanverwante producten: INNO-COM-10M-E3-V31-SET
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Voor het eerst is er een consistente reeks sensoroplossingen beschikbaar die optische functieprincipes en innovatieve technologieën in identieke behuizingen verenigt. Gebruikers genieten van een uniform bedieningsconcept voor het volledige portfolio. Ontdek de R100-, R101-, R103-, R200- en R201-series...
Of het nu om glas, zonnewafers of printplaten gaat, de optische sensoren van de ML100-series zijn volledig toegespitst op de vereisten van verschillende, gecompliceerde detectietaken. Leer meer over deze productportfolio...
Pepperl+Fuchs N.V.
Metropoolstraat 11
2900 Schoten / Anvers
BELGIË
BTW BE 0436.097.152, RPR Antwerpen, afd. Antw.
sales@be.pepperl-fuchs.com
+32 3 644 25 00
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.