General specifications |
Measurement range | 0.3 ... 150 m
|
Reference target | REF-500MMx500MM (Foil reflector 500 mm x 500 mm) REF-250MMx250MM (Film reflector 250 mm x 250 mm) up to 75 m |
Light source | laser diode |
Light type | modulated visible red light |
Laser nominal ratings | |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser class | 1 |
| Wave length | 660 nm |
| Beam divergence | < 5 mrad |
| Pulse length | 5 ns |
| Repetition rate | 300 kHz |
| max. pulse energy | < 2 nJ |
Measuring method | Pulse Ranging Technology (PRT) |
Max. Motion velocity | 15 m/s |
Diameter of the light spot | < 75 cm at 150 m |
Ambient light limit | > 80000 Lux |
Resolution | 0.1 mm , adjustable |
Temperature influence | 0.03 mm/K |
Functional safety related parameters |
MTTFd | > 100 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Function indicator | 6 LEDs |
Control elements | Control panel (4 membrane keys) for setting parameters |
Parameterization indicator | Illuminated display for displaying measured values and parameterization |
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
No-load supply current | 625 mA (10 V) ... 250 mA (24 V) ... 220 mA (30 V) |
Protection class | |
Time delay before availability | < 1 s |
Interface |
Interface type | SSI |
Monoflop time | 20 µs |
Clock frequency | 0.1 ... 1 MHz |
Interface 1 |
Interface type | RS-422 |
Read out rate | 4.8 ... 115.2 kBit/s |
Input/Output |
Input/output type | 2 inputs/outputs, independent configuration, short-circuit protected, reverse polarity protected |
Output |
Switching voltage | max. 30 V DC |
Switching current | max. 100 mA , resistive load |
Voltage drop | ≤ 1.5 V DC |
Conformity |
Product standard | EN 60947-5-2 |
Laser safety | EN 60825-1:2014 |
Measurement accuracy |
Measured value output | 1 ms |
Average data age | 3 ms , 6 ms , 12 ms , 25 ms , adjustable |
Absolute accuracy | typ. ± 2.5 mm |
Repeat accuracy | < 1 mm |
Approvals and certificates |
Protection class | III (rated insulation voltage 50 V) |
UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
Ambient conditions |
Ambient temperature | -10 ... 60 °C (14 ... 140 °F) |
Storage temperature | -40 ... 75 °C (-40 ... 167 °F) |
Relative humidity | 95 % , no moisture condensation |
Mechanical specifications |
Degree of protection | IP67 |
Connection | 4-pin, M12x1 connector, A-coded (supply) , 5-pin, M12x1 connector, B-coded (SSI) |
Material | |
| Housing | ABS / PC |
| Optical face | PMMA , hard coated |
Mass | approx. 300 g |
Dimensions | |
| Height | 106.6 mm |
| Width | 55 mm |
| Depth | 80.6 mm |