Absolute rotary encoder ENA58TL-R***-IO-Link
- Absolute rotary encoder of the innovative Pure Line
- Recessed hollow shaft
- IO-Link Interface for process data, parameterization and diagnosis
- Suitable for condition monitoring
- Measuring range, direction of rotation and switching signals programmable
- Free of wear magnetic sampling
- High resolution and accuracy
- Status LEDs
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Stáhněte si kompletní katalogový list ve formátu PDF:
Výňatek z katalogového listu: Technická data ENA58TL-R***-IO-Link
| General specifications | ||
|---|---|---|
| Detection type | magnetic sampling | |
| Device type | Absolute rotary encoder as Pure Line | |
| Measured variable | position Temperature |
|
| Linearity error | ≤ ± 0.1 ° | |
| UL File Number | E223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product. | |
| Functional safety related parameters | ||
| MTTFd | 566 a at 40 °C | |
| Mission Time (TM) | 20 a | |
| L10 | 5 E+8 revolutions at 24/198 N axial/radial shaft load | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| LED STATUS | LED green flashing with short break (1 Hz) - IO-Link mode |
|
| Electrical specifications | ||
| Operating voltage | 18 ... 30 V DC | |
| No-load supply current | max. 50 mA | |
| Power consumption | approx. 1.5 W | |
| Time delay before availability | < 1 s | |
| Interface | ||
| Interface type | IO-Link | |
| IO-Link revision | 1.1 | |
| Device profile | Identification and Diagnosis - I&D | |
| Resolution | ||
| Single turn | up to 16 Bit programmable | |
| Multiturn | up to 15 Bit programmable | |
| Overall resolution | up to 31 Bit programmable | |
| Process data | Input 12 Byte - measurement value 4 Byte - resolution 16 Bit - auxiliary mesurement value 4 Byte - switching signals 2 Bit - diagnosis signals 2 Bit - status data |
|
| Vendor ID | 1 (0x0001) | |
| Device ID | 5243905 (0x500401), 5243906 (0x500402), 5243909 (0x500405), 5243910 (0x500406) | |
| Transfer rate | COM3 (230.4 kbits/s) | |
| Min. cycle time | 1.5 ms | |
| SIO mode support | no | |
| Compatible master port type | Class A Class B (use 3-pole adapter or 3-wire cable) |
|
| Connection | ||
| Connector | M12 connector, 5 pin , A-coded | |
| Standard conformity | ||
| Degree of protection | DIN EN 60529, IP65, IP67 | |
| Communication interface | IEC 61131-9 / IO-Link V1.1.2 | |
| Climatic testing | DIN EN 60068-2-78, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms | |
| Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 1000 Hz | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product. | |
| Ambient conditions | ||
| Operating temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | 98 % , no moisture condensation | |
| Mechanical specifications | ||
| Material | ||
| Housing | Zinc plated steel, painted | |
| Flange | Aluminum | |
| Shaft | Stainless steel | |
| Mass | approx. 370 g | |
| Rotational speed | max. 12000 min -1 | |
| Moment of inertia | < 30 gcm2 | |
| Starting torque | < 3 Ncm | |
| Shaft load | ||
| Axial | 24 N | |
| Radial | 198 N | |
| Angle offset | ± 0.9 ° | |
| Axial offset | ± 0.3 mm static; ± 0,1 mm dynamic | |
| Radial offset | ± 0.5 mm static; ± 0,2 mm dynamic | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270502 |
| ECLASS 12.0 | 27270502 |
| ECLASS 11.0 | 27270502 |
| ECLASS 10.0.1 | 27270502 |
| ECLASS 9.0 | 27270502 |
| ECLASS 8.0 | 27270502 |
| ECLASS 5.1 | 27270502 |
| ETIM 9.0 | EC001486 |
| ETIM 8.0 | EC001486 |
| ETIM 7.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| ETIM 5.0 | EC001486 |
| UNSPSC 12.1 | 39121527 |
Details: ENA58TL-R***-IO-Link
Informative Literature: ENA58TL-R***-IO-Link
| Literature | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|
| Application Report - Absolute Encoder with IO-Link-Interface | ENG | 344 KB |
Product Documentation: ENA58TL-R***-IO-Link
| Product information | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|
| Leaflet UL / Beipackzettel UL | ALL | 127 KB | |
| Installation and user instructions for offline parameterization of IO-Link sensors | ENG | 1788 KB | |
| Brief Instructions | |||
| Instruction leaflet / Beipackzettel | ALL | 256 KB | |
| Manuals | |||
| Manual ENA**TL-**IO** | ENG | 2448 KB | |
| Parameter Information | |||
| Brief instructions | ENG | 606 KB | |
| Brief instructions | ENG | 603 KB | |
| Brief instructions | ENG | 603 KB | |
| Brief instructions | ENG | 606 KB | |
Approvals: ENA58TL-R***-IO-Link
| Certificates | Číslo certifikátu | Jazyk | Typ souboru | Velikost souboru |
|---|---|---|---|---|
| IO-Link Manufacturer Declaration | CERT-5884A | ALL | 145 KB | |
| US CA UL | CoC 20190913-E223176 RptRef E223176-20081013 | ALL | 280 KB | |
| Declaration of Conformity | ||||
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-7159 | ALL | 248 KB | |
Software: ENA58TL-R***-IO-Link
| Device Description Files/Drivers | Informace o uvolnění | Typ souboru | Velikost souboru |
|---|---|---|---|
| IODD for ENA58TL-R*5-00* series / IODD für ENA58TL-R*5-00* series | V1.01.000 / 2021-08-01 | ZIP | 190 KB |
| IODD for ENA58TL-R*5-15* series / IODD für ENA58TL-R*5-15* series | V1.01.000 / 2021-08-01 | ZIP | 191 KB |
| IODD for ENA58TL-R*7-00* series / IODD für ENA58TL-R*7-00* series | V1.01.000 / 2021-08-01 | ZIP | 190 KB |
| IODD for ENA58TL-R*7-15* series / IODD für ENA58TL-R*7-15* series | V1.01.000 / 2021-08-01 | ZIP | 191 KB |
| Add-On instructions for use in Rockwell Automation® Studio 5000 software with all ENA Series IO-Link Encoders and used with ICE1, ICE2, and Allen-Bradley® IO-Link masters. / Add-On-Anweisungen für die Verwendung in der Software Rockwell Automation® Studio 5000 mit allen IO-Link-Drehgebern der ENA-Serie, einschließlich ICE1 und ICE2, sowie den Allen-Bradley® IO-Link-Mastern | March / 2021 | ZIP | 51925 KB |
| Software Tools | |||
| IO-Link Offline Parameterization Tool / IO-Link Offline-Parametriertool | V1.00.006 / 2022-07-10 | ZIP | 96138 KB |
Související produkty: ENA58TL-R***-IO-Link
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs s.r.o.
Pod Vodárenskou věží 4
18208 Praha 8
Czech Republic
info@cz.pepperl-fuchs.com
+420 225 989 180
© 2024 Všechna práva vyhrazena
Pepperl+Fuchs je přední vývojář a výrobce průmyslových senzorů a komponentů pro světový trh automatizace. Neustálé inovace, trvalé kvalitní a stálý růst zaručuje mnoho úspěchů přes více než 70 let. Pepperl+Fuchs zaměstnává 6300 lidí po celém světě a má výrobní závody v Německu, USA, Singapuru, Maďarsku, Indonésii a Vietnamu, které podléhají ISO 9001.