AS-Interface sensor/actuator module VBA-4E4A-G16-ZEJ/E2L

Compact design
Connections via round connector
AS-Interface connection via M12 metal threaded insert with SPEEDCON
Function display for bus, ext. auxiliary voltage, inputs and outputs
Degree of protection IP67 / IP68 / IP69K
Inputs for 2- and 3-wire sensors
Supply for inputs from AS-Interface
Power supply of outputs from the external auxiliary voltage
Communication monitoring
Detection of overload on sensor supply
Detection of output overload with LED per channel

Technical Data
Product Documentation
Design / Simulation
Approvals
관련문서
전문가 상담

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

PDF 파일로 된 데이타 시트 다운로드:

데이타 시트 발췌: 기술 사양 VBA-4E4A-G16-ZEJ/E2L

제품 설명
G16 compact module, 4 inputs (PNP) and 4 electronic outputs

General specifications
Node type		A/B node
AS-Interface specification		V3.0
Required gateway specification		≥ V3.0
Profile		S-7.A.7
	IO code	7
	ID code	A
	ID1 code	7
	ID2 code	7
UL File Number		E223772
Indicators/operating means
LED PWR/FAULT		Status display; multi-colour LED Green: normal operation Red: communication fault Flashing yellow/red: address 0 Flashing green/red: sensor supply or output overload
LED AUX		ext. auxiliary voltage U_AUX; dual LED green/red green: voltage OK red: reverse voltage
LED IN		switching state (input); 4 LED yellow
LED OUT		Switching status (output); 4 yellow/red LEDs Yellow: output active Red: output overload
Electrical specifications
Auxiliary voltage (output)		20 ... 30 V DC PELV
Rated operating voltage		26.5 ... 31.6 V from AS-Interface
Rated operating current		≤ 40 mA (without sensors) / max. 240 mA
Protection class		III
Surge protection		U_AUX, U_in: Over voltage category III, safe isolated power supplies (PELV)
Input
Number/Type		4 inputs for 2- or 3-wire sensors (PNP), DC
Supply		from AS-Interface
Voltage		21 ... 31 V
Current loading capacity		≤ 200 mA (T_B ≤ 40 °C), ≤ 150 mA (T_B ≤ 70 °C), overload-proof and short-circuit protected
Input current		≤ 9 mA (limited internally)
Switching point		according to DIN EN 61131-2 (Type 2)
	0 (unattenuated)	≤ 3 mA
	1 (attenuated)	≥ 5 mA
Signal delay		< 1 ms (input/AS-Interface)
Output
Number/Type		4 electronic outputs, PNP, overload and short-circuit proof
Supply		from external auxiliary voltage U_AUX
Voltage		≥ (U_AUX - 0.5 V)
Current		1 A per output
Usage category		DC-13
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007
Standard conformity
Degree of protection		EN 60529:2000
Fieldbus standard		EN 62026-2:2013
Input		EN 61131-2
Emitted interference		EN 61000-6-4:2007
AS-Interface		EN 62026-2:2013
Noise immunity		EN 61000-6-2:2005 EN 62026-2:2013
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Relative humidity		85 % , noncondensing
Climatic conditions		For indoor use only
Altitude		≤ 2000 m above MSL
Shock and impact resistance		30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks
Vibration resistance		0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles
Pollution degree		3
Mechanical specifications
Degree of protection		IP67 / IP68 / IP69k
Connection		AS-Interface and auxiliary voltage: M12 x 1 round connector sensors/actuators: M8 x 1 round connector
Material
	Housing	PBT
Mass		150 g
Tightening torque, cable gland		0.4 Nm (M12 connector), 0.2 Nm (M8 connector)
Dimensions
	Height	29.35 mm
	Width	30 mm
	Length	143 mm
Mounting		screw mounting

Classifications

System	Classcode
ECLASS 13.0	27242604
ECLASS 12.0	27242604
ECLASS 11.0	27242604
ECLASS 10.0.1	27242604
ECLASS 9.0	27242604
ECLASS 8.0	27242604
ECLASS 5.1	27242604
ETIM 9.0	EC001599
ETIM 8.0	EC001599
ETIM 7.0	EC001599
ETIM 6.0	EC001599
ETIM 5.0	EC001599
UNSPSC 12.1	39121535

Details: VBA-4E4A-G16-ZEJ/E2L

Product Documentation: VBA-4E4A-G16-ZEJ/E2L

Brief Instructions	언어	파일 타입	파일 크기
Instruction leaflet / Beipackzettel	ALL	PDF	1012 KB

Design / Simulation: VBA-4E4A-G16-ZEJ/E2L

CAD	언어	파일 타입	파일 크기
CAD 3-D / CAD 3-D	ALL	STP	2956 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	365 KB

Approvals: VBA-4E4A-G16-ZEJ/E2L

Certificates	인증서 번호	언어	파일 타입	파일 크기
Canada, USA UL	CoC 20141115-E223772	ALL	PDF	342 KB
Worldwide AS-International Association AS-Interface	77902	ALL	PDF	590 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0983C	ALL	PDF	115 KB

관련문서: VBA-4E4A-G16-ZEJ/E2L

Accessories

	VBP-HH1-V3.0-KIT AS-Interface Handheld with accessory
	AS-Interface Handheld with accessoryfa

	VAZ-V3-B Blind plug
	Blind plug for M8 socketsfa

General Notes Relating to Pepperl+Fuchs Product Information

Free Download: White Paper on TCP-Based Communication Protocols (PDF)

This free PDF white paper compares the different TCP-based communication protocols (AMQP, OPC UA, MQTT, REST API) that have found their way up and are considered the enablers of IIoT and Industry 4.0. Get your free download now!

AS-Interface Switch Cabinet Module KE5 – Simple Handling and Improved Manageability

The unique housing design of the new KE5 switch cabinet module enables distinct visibility and simplifies mounting, wiring, and maintenance inside switch cabinets and junction boxes.

Download the AS-Interface Product Overview

Get to know our full range of AS-Interface products.

페펄앤드푹스코리아(주)
서울특별시 서초구 서초대로88
6층 (유니온빌딩)
06673 대한민국
대한민국
info@kr.pepperl-fuchs.com
phone +82 2 34819494

Pepperl+Fuchs는 세계 자동화 시장에서 전자기 센서 및 컴포넌트 제조 및 개발의 선두주자입니다. 지속적인 혁신, 오래토록 변치 않는 품질 및 꾸준한 성장이 지난 70년 동안 계속적인 성장을 보장하였습니다. Pepperl+Fuchs의 전세계에 6,300명의 임직원을 보유하고 있으며, 독일, USA, 싱가포르, 헝가리, 인도네시아 및 베트남에 제조 시설을 가지고 있으며, 대부분 ISO9001을 획득하였습니다.