Switch Amplifier HiC2832R1

2-channel isolated barrier
24 V DC supply (bus powered)
Dry contact or NAMUR inputs
Application-specific outputs
2 passive transistor outputs (resistive)
Line fault detection (LFD)
Line fault transparency (LFT)
Reversible mode of operation
Up to SIL 2 (SC 3) acc. to IEC/EN 61508

Technical Data
Product Documentation
Design / Simulation
Approvals
관련문서
전문가 상담

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

PDF 파일로 된 데이타 시트 다운로드:

데이타 시트 발췌: 기술 사양 HiC2832R1

General specifications
Signal type		Digital Input
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 2
Systematic capability (SC)		SC 3
Supply
Connection		SL1: 1a(-), 1b(-); 2a(+), 2b(+)
Rated voltage		19 ... 30 V DC bus powered via Termination Board
Ripple		≤ 10 %
Rated current		≤ 30 mA
Power dissipation		≤ 600 mW
Power consumption		≤ 700 mW
Input
Connection side		field side
Connection		SL2: 5a(+), 5b(-); 1a(+), 1b(-)
Rated values		acc. to EN 60947-5-6 (NAMUR), see manual for electrical data
Open circuit voltage/short-circuit current		approx. 10 V DC / approx. 8 mA
Switching point/switching hysteresis		1.2 ... 2.1 mA / approx. 0.2 mA
Line fault detection		breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
Pulse/Pause ratio		min. 100 µs / min. 100 µs
Output
Connection side		control side
Connection		SL1: 8a(+), 7a(-); 10a(+), 9a(-)
Rated voltage		19 ... 30 V DC with external resistance > 2 kΩ, e. g. 16-channel ProSafe DI card SDV144 from Yokogawa
Response time		≤ 200 µs
Output I, II		signal or fault message, passive transistor output (resistive) 0-signal: 33 kΩ ± 5 % + voltage drop 6.5 V ± 0.5 V 1-signal: voltage drop 6.5 V ± 0.5 V fault: > 100 kΩ
Fault indication output
Connection		SL1: 6b
Output type		open collector transistor (internal fault bus)
Transfer characteristics
Switching frequency		≤ 5 kHz
Galvanic isolation
Output/power supply		basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 V_eff
Output/Output		basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 V_eff
Indicators/settings
Display elements		LEDs
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		EN IEC 61326-3-2:2018 , NE 21:2017 For further information see system description.
Degree of protection		IEC 60529:2001
Protection against electrical shock		IEC 61010-1
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Mass		approx. 100 g
Dimensions		12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D)
	Height	106 mm
	Width	12.5 mm
	Depth	128 mm
Mounting		on termination board
Coding		pin 1 and 2 trimmed For further information see system description.
Data for application in connection with hazardous areas
EU-type examination certificate		BVS 11 ATEX E 026
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Input	Ex ia
	Voltage	10.5 V
	Current	17.1 mA
	Power	45 mW (linear characteristic)
Supply
	Maximum safe voltage	253 V AC (Attention! U_m is no rated voltage.)
Output
	Maximum safe voltage	253 V AC (Attention! U_m is no rated voltage.)
Certificate		KIWA 15 ATEX 0037 X
	Marking	II 3G Ex ec IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-7:2015+A1:2018 , EN 50303:2000
International approvals
FM approval
	Control drawing	116-0430 (cFMus)
UL approval		E106378
	Control drawing	116-0331
IECEx approval
	IECEx certificate	IECEx BVS 11.0040 IECEx KIWA 15.0019X
	IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I , Ex ec IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210121
ECLASS 12.0	27210121
ECLASS 11.0	27210121
ECLASS 10.0.1	27210121
ECLASS 9.0	27210121
ECLASS 8.0	27210121
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: HiC2832R1

Product Documentation: HiC2832R1

Safety and Security Documentation	언어	파일 타입	파일 크기
Instruction manual	ENG	PDF	169 KB
Functional Safety Manual	ENG	PDF	2014 KB
Manuals
System Manual	ENG	PDF	5438 KB

Design / Simulation: HiC2832R1

CAD	언어	파일 타입	파일 크기
CAD 3-D / CAD 3-D	ALL	STP	2770 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: HiC2832R1

Certificates	인증서 번호	언어	파일 타입	파일 크기
Brasil TUV Rheinland Brazil	TÜV 16.0821	ALL	PDF	1136 KB
Canada FM	FM 17 CA 0057X	ALL	PDF	328 KB
China SITIIAS CCC Ex Certificate	2023322316005307 (Singapore)	ALL	PDF	1107 KB
Europe DEKRA EXAM II (1) D I (M1) II (1) G	BVS 11 ATEX E 026	ALL	PDF	1218 KB
Europe KIWA ATEX Category 3 G	KIWA 15 ATEX 0037X	ALL	PDF	988 KB
KIWA IECEx Certificate of Conformity Zone 2	IECEx KIWA 15.0019X	ALL	LINK	---
Korea KOSHA	15-AV4BO-0596	ALL	PDF	611 KB
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378	CoC E106378 Rep Ref E106378-20111027	ALL	PDF	565 KB
USA FM	FM 17 US 0111X	ALL	PDF	330 KB
United Arab Emirates SGS Gulf Limited ECASEx	24-08-121289/E24-08-125443	ALL	PDF	604 KB
United Arab Emirates SGS Gulf Limited ECASEx	24-08-121288/E24-08-125438	ALL	PDF	602 KB
United Kingdom CML UK-Type Examination Certificate UKEX Category (1) D UKEX Category (1) G UKEX Category (M1)	CML 21UKEX21403	ALL	PDF	158 KB
Worldwide DEKRA EXAM IECEx Certificate of Conformity	IECEx BVS 11.0040	ALL	LINK	---
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	136 KB
Control drawing FM / Control drawing FM		ALL	PDF	89 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0928F	ALL	PDF	51 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5840	ALL	PDF	79 KB