Ex pxb motor purge and pressurization control unit 6100-MP-EX-*

Certified for ATEX and IECEx Zone 1
Maximum flow rate of 14,000 l/min
Intrinsically safe user interface for programming and monitoring the system
Control Unit monitors system operation and controls enclosure power
Auxiliary contact outputs for alarm or control
Multiple temperature inputs for monitoring and control
Automatic pressure compensation for excess leakage from motor

Technical Data
Informative Literature
Product Documentation
Approvals
관련문서
전문가 상담

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

PDF 파일로 된 데이타 시트 다운로드:

데이타 시트 발췌: 기술 사양 6100-MP-EX-*

제품 설명
6100 series Ex pxb motor purge and pressurization system control unit

General specifications
Operating mode		manual, semi-automatic, or fully automatic - programmable
Series		6100 Series
System		Ex pxb Purge
Number of volume exchanges		4 to 19
Hazardous environment		gas
Supply
Rated voltage		100 ... 250 V AC, 50 ... 60 Hz / 0.2 A 20 ... 30 V DC / 0.6 A
Electrical specifications
Connection
	Power	Ex e terminal blocks
	Connection	6000-ISB DIN mounted terminal
Input
Input type		IS 1: Dedicated for 6000-TEMP-01 (optional) IS 2: Dedicated for 6100-MP-LPP Input 1: SRM, discrete input, Intrinsically Safe Input 2: SRM, discrete input, Intrinsically Safe Input 3: Dedicated for EPV-6100-MP, Flow Signal Input 4: Dedicated high pressure switch, Max Pressure Signal (optional)
Output
Output I		AUX 1
	Output type	Dry contacts, SPDT
	Inrush current	5 A
	Contact loading	2 A at 240 V AC resistive load 2 A at 24 V DC
Output II		AUX 2
	Output type	Dry contacts, SPDT
	Inrush current	5 A
	Contact loading	2 A at 240 V AC resistive load 2 A at 24 V DC
Output III		enclosure 1 and 2
	Output type	Dry contacts (2) SPST, NO
	Inrush current	72 A
	Contact loading	8 A at 240 V AC / 120 V AC resistive load 8 A at 24 V DC
Indicators/settings
LED indication		Safe pressure: Blue - safe pressure is achieved Enclosure power: Green - power on; Red - power off Rapid exchange: Blue - purging is running System bypass: Yellow - bypass is activated Alarm fault: Red (blinking) - any alarm input detected; Red (solid) - fault
Pneumatic parameters
Protective gas supply		regulated and filtered air or inert gas
Pressure requirement		regulated side: 1.4 ... 8.3 bar [20 ... 120 psig) unregulated side: 4.1 ... 8.3 bar [65 ... 120 psig)
Safe pressure		0.62 mbar [0.25 in wc / 6.4 mm wc] minimum for 6100-MP-LPP-*
Purge flow and enclosure pressure rate		2000 l/m ... 14000 l/m see EPV-6100 datasheet for flow rate steps
Valve flows		pressurization valve: manual gate valve purging valve: pilot drive angle seat valve pilot valve: intrinsically safe solenoid valve
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
RoHS
	Directive 2011/65/EU (RoHS)	EN 50581:2012
Ambient conditions
Ambient temperature		0 ... 60 °C (32 ... 140 °F) Standard version -20 ... 60 °C (-4 ... 140 °F) Low temp version, no regulator version
Storage temperature		0 ... 80 °C (32 ... 176 °F) Standard version -20 ... 80 °C (-4 ... 176 °F) Low temp version, no regulator version
Relative humidity		5 ... 95 %, noncondensing
Vibration resistance		1 g , 10 ... 150 Hz , all axes
Impact resistance		15 g, 11 ms, all axes
Mechanical specifications
Connection type		Terminals
Core cross section		see manual
Degree of protection		IP66
Cable entry		3 x M16 holes, plugs that are included are not hazardous-location rated 4 x M20 holes, plugs that are included are not hazardous-location rated
Material		inlet and outlet: 1¼ inch NPTF, 316 stainless steel internal piping: copper bulkhead fittings: 316 stainless steel (no regulator model) gate valve: bronze, Grafoil seals purging valve: 316 stainless steel, PTFE seals solenoid valve: brass housing: 316L stainless steel regulator: zinc (standard temp); aluminum (low temp); N/A (no regulator) filter (pneumatic): aluminum tubing (pneumatic): nylon fittings (pneumatic): nickel-plated brass
Mass		47.2 kg (104 lb)
Dimensions		216 mm x 508 mm x 770 mm (8.5 in x 20 in x 30.3 in)
	Height	762 mm
	Width	558 mm
	Depth	213 mm
Data for application in connection with hazardous areas
Certificate		CML 19 ATEX 1425X
	Marking	II 2G Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018 EN 60079-1:2014 EN 60079-2:2014 EN 60079-7:2015 EN 60079-11:2012
International approvals
IECEx approval		IECEx CML 19.0156X Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb
General information
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Supplemental Standards : EN 61010-1:2010

Classifications

System	Classcode
ECLASS 13.0	27180591
ECLASS 12.0	27180591
ECLASS 11.0	27180591
ECLASS 10.0.1	27293101
ECLASS 9.0	27293101
ECLASS 8.0	27293101
ECLASS 5.1	40050501
ETIM 9.0	EC000243
ETIM 8.0	EC000243
ETIM 7.0	EC000243
ETIM 6.0	EC000243
ETIM 5.0	EC000243
UNSPSC 12.1	39121303

Details: 6100-MP-EX-*

Informative Literature: 6100-MP-EX-*

We are sorry, there are no documents for your language selection. Please select another language.

Product Documentation: 6100-MP-EX-*

Product information	언어	파일 타입	파일 크기
Basic Explosion Protection Compendium - Type of Protection "Purge and Pressurization"	ENG	PDF	3860 KB
Safety and Security Documentation
Instruction manual	ENG	PDF	172 KB
Manuals
Manual	ENG	PDF	5218 KB

Approvals: 6100-MP-EX-*

Certificates	인증서 번호	언어	파일 타입	파일 크기
Brasil Certificate of Compliance	DNV 24.0062 X	ALL	PDF	421 KB
Europe CML ATEX Certificate II 2 G	CML 19ATEX1425X	ALL	PDF	118 KB
IECEx Certificate of Conformity	IECEx CML 19.0156X	ALL	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F)	DOC-B0D7C	ALL	PDF	113 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-B0F6	ALL	PDF	160 KB