6100 series pressure sensor 6100-MP-LPP-*
- Universal mounting in any orientation
- Measures internal pressures from 0 to 25 mbar
- 1 1/2 inch NPT process connection
- Intrinsically safe when connected to 6100 control unit
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
PDF 파일로 된 데이타 시트 다운로드:
데이타 시트 발췌: 기술 사양 6100-MP-LPP-*
| 제품 설명 |
|---|
| 6100 series purge and pressurization system pressure sensor |
| General specifications | ||
|---|---|---|
| Series | 6100 Series | |
| System | Ex pxb Purge | |
| Hazardous environment | gas | |
| Electrical specifications | ||
| Connection | ||
| Power | Intrinsically safe connection to the 6100 control unit | |
| Signal | Bus connection to 6100 control unit | |
| Connection | M12 connector, 4-pin, max length 30 m | |
| Indicators/settings | ||
| LED indication | power: green | |
| Pneumatic parameters | ||
| Maximum pressure | 0 ... 25 mbar (0 ... 10 in wc) pressure range | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN IEC 63000:2018 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -30 ... 80 °C (-22 ... 176 °F) | |
| Relative humidity | 5 ... 95 %, noncondensing | |
| Vibration resistance | 10 ... 100 Hz , 1 g, all axes | |
| Impact resistance | 30 g, 11 ms, all axes | |
| Mechanical specifications | ||
| Material | 5052 anodized aluminum, 6061T6 anodized aluminum | |
| Installation | - any orientation to enclosure - not gravity dependent | |
| Mass | approx. 0.5 kg (1.1 lb) | |
| Dimensions | 57.2 mm x 81.1 mm x 82.6 mm (2.3" x 3.2" x 3.3") | |
| Height | 146 mm | |
| Width | 127.5 mm | |
| Depth | 82.5 mm | |
| Mounting | 1 1/2" NPT knockout (50.8 mm (2") hole) with sealing washer and nut |
|
| Data for application in connection with hazardous areas | ||
| Certificate | CML 19 ATEX 1425X | |
| Marking |  II 2 G Ex ib [pxb Gb] IIC T4 Gb |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018 EN 60079-2:2014 EN 60079-11:2012 |
|
| International approvals | ||
| IECEx approval | IECEx CML 19.0156X Ex ib [pxb Gb] IIC T4 Gb |
|
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Supplemental Standards : EN 61010-1:2010 |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180591 |
| ECLASS 12.0 | 27180591 |
| ECLASS 11.0 | 27180591 |
| ECLASS 10.0.1 | 27292190 |
| ECLASS 9.0 | 27292190 |
| ECLASS 8.0 | 27292190 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121303 |
Details: 6100-MP-LPP-*
Product Documentation: 6100-MP-LPP-*
| Safety and Security Documentation | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|
| Instruction manual | ENG | 172 KB | |
| Manuals | |||
| Manual | ENG | 5218 KB | |
Design / Simulation: 6100-MP-LPP-*
| CAD | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|
| CAD 2-D / CAD 2-D | ALL | ZIP | 669 KB |
| CAD 3-D / CAD 3-D | ALL | STP | 7224 KB |
Approvals: 6100-MP-LPP-*
| Certificates | 인증서 번호 | 언어 | 파일 타입 | 파일 크기 |
|---|---|---|---|---|
| Brasil Certificate of Compliance | DNV 24.0062 X | ALL | 421 KB | |
| Europe CML ATEX Certificate II 2 G | CML 19ATEX1425X | ALL | 118 KB | |
| IECEx Certificate of Conformity | IECEx CML 19.0156X | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F) | DOC-B0D7C | ALL | 113 KB | |
관련문서: 6100-MP-LPP-*
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
페펄앤드푹스코리아(주)
서울특별시 서초구 서초대로88
6층 (유니온빌딩)
06673 대한민국
대한민국
info@kr.pepperl-fuchs.com
+82 2 34819494
© 2024 All Rights Reserved.
Pepperl+Fuchs는 세계 자동화 시장에서 전자기 센서 및 컴포넌트 제조 및 개발의 선두주자입니다. 지속적인 혁신, 오래토록 변치 않는 품질 및 꾸준한 성장이 지난 70년 동안 계속적인 성장을 보장하였습니다. Pepperl+Fuchs의 전세계에 6,300명의 임직원을 보유하고 있으며, 독일, USA, 싱가포르, 헝가리, 인도네시아 및 베트남에 제조 시설을 가지고 있으며, 대부분 ISO9001을 획득하였습니다.