Motor Starters Ex d IIB F7-DOL*
- Various power ratings available
- Coil voltage 415V
- Ex d and Ex tD certified
- Installation in Zone 1, Zone 2, Zone 21 and Zone 22
- Gas group IIB
- Aluminum enclosure
- Suitable for Ex d motors
- Degree of protection IP66
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Pobierz pełną kartę katalogową w formie pliku PDF:
Dane techniczne F7-DOL*
| Electrical specifications | ||
|---|---|---|
| Operating voltage | 415 V | |
| Operating current | see PDF data sheet | |
| Terminal capacity | ||
| Main terminals capacity | 4 mm2 | |
| Main terminals torque | 1.7 Nm | |
| Grounding terminals capacity | M6 grounding bolt | |
| Contactor rating | see PDF data sheet | |
| Overload relay | see PDF data sheet | |
| Phases | 3 | |
| Function | direct online starter | |
| Switching diagram | see switching diagram overview | |
| Mechanical specifications | ||
| Thread type | metric ISO pitch 1.5 mm | |
| Enclosure range | F7 | |
| Enclosure cover | detachable , hinged | |
| Cover fixing | stainless steel socket cap head screws | |
| Screws | M6 | |
| Number | 8 | |
| Tightening torque | 3 Nm | |
| Material of screws | stainless steel | |
| Yield stress | min. 450 N/mm2 | |
| Cover seal | chloroprene | |
| Flamepath grease | Fluid film grade AR | |
| Degree of protection | IP66 | |
| Cable entry face A | ||
| M20 quantity | 2 | |
| M20 type | Stopping Plugs | |
| Cable entry face B | ||
| M20 quantity | 2 | |
| Material | ||
| Enclosure | aluminum alloy | |
| Finish | epoxy coated RAL 7032 | |
| Mass | approx. 5 kg | |
| Dimensions | ||
| External dimension (A) | 210 mm | |
| External dimension (B) | 210 mm | |
| External dimension (C) | 158 mm | |
| External dimension with operating element (C1) | 199 mm | |
| Mounting holes distance (G) | 187 mm | |
| Mounting holes distance (H) | 187 mm | |
| Mounting holes diameter (J) | 9 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | see datasheets of stopping plugs | |
| Mounting | see PDF data sheet | |
| Grounding | M6 external grounding points | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | SIRA 07 ATEX 1134 | |
| Marking |  II 2 GD Ex d IIB T* Ex tD A21 T6/T80 °C @ Ta +60 °C |
|
| Maximum power dissipation | 31 W | |
| International approvals | ||
| IECEx approval | IECEx TSA 07.0029 | |
| Conformity | ||
| Degree of protection | EN60529 | |
| Usage category | IEC / EN 60947 | |
| CE marking | 0102 | |
| General information | ||
| Ordering information | This device will be delivered completely configured and assembled ready for use. For configuration details please contact Customer Service. | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27144052 |
| ECLASS 12.0 | 27144052 |
| ECLASS 11.0 | 27144052 |
| ECLASS 10.0.1 | 27144052 |
| ECLASS 9.0 | 27144052 |
| ECLASS 8.0 | 27144052 |
| ECLASS 5.1 | 27370401 |
| ETIM 9.0 | EC000522 |
| ETIM 8.0 | EC000522 |
| ETIM 7.0 | EC000522 |
| ETIM 6.0 | EC000522 |
| ETIM 5.0 | EC000522 |
| UNSPSC 12.1 | 39121314 |
Details: F7-DOL*
Approvals: F7-DOL*
| Certificates | Nr. certyfikatu | Język | Typ pliku | Rozmiar pliku |
|---|---|---|---|---|
| Australia Sira II 2GD ATEX | SIRA 07ATEX1134 | ALL | 235 KB | |
| Test Safe IECEx Certificate of Conformity | IECEx TSA 07.0029 | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-A036D | ALL | 160 KB | |
Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
+48 22 256 9770
Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.