Read head WCS3B-LS2**
- RS-485 interface
- Non-contact, absolute position encoder
- Automatic detection of dirt accumulation
- Output of position and speed
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens WCS3B-LS2**
| Productbeschrijving |
|---|
| Read head, RS-485 interface, with RS-485 terminal resistor |
| General specifications | ||
|---|---|---|
| Passage speed | ≤ 12.5 m/s | |
| Measuring length | max. 314.5 m | |
| Free tolerances to code rail | horizontal: 31 mm ( ± 15.5 mm ) vertical: 28 mm ( ± 14 mm ) |
|
| Resolution | ± 0.4 mm (1,250 positions/m) | |
| Functional safety related parameters | ||
| MTTFd | 198 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green: power on | |
| Data flow indicator | LED yellow: data communication active | |
| Velocity indicator | LED yellow (only with Option S, speed output) off, if speed limit is exceeded (instead of data flow display) |
|
| Error indicator | LED red flashing: read head outside of code rail solid on: internal diagnostic test failed |
|
| Display | Display module, 6-digit (only with option D, display) adaptable to installation position |
|
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Power consumption | 2 VA with Option H, heating: 11 VA at 24 V DC |
|
| Interface | ||
| Interface type | RS 485 interface | |
| Data output code | binary code | |
| Transfer rate | Baud rate 19.2 kBit/s ... 187.5 kBit/s (to be specified with order) | |
| Termination | with RS 485 termination | |
| Output | ||
| Output velocity | switching output , short-circuit protected (only with Option S, speed output) |
|
| Switching voltage | Operating voltage | |
| Standard conformity | ||
| Emitted interference | DIN EN 61000-6-4 , DIN EN 12015 | |
| Noise immunity | DIN EN 61000-6-2 , DIN EN 12016 | |
| Shock resistance | DIN EN 60068-2-27, half sine 30 g, 18 ms | |
| Vibration resistance | DIN EN 60068-2-6, sine, 5 g, 10 - 2000 Hz, 10 cycles | |
| Approvals and certificates | ||
| CSA approval | cCSAus Certified, General Purpose Class 2 power source |
|
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Operating temperature | 0 ... 60 °C (32 ... 140 °F) with Option H, heating: -40 ... 60 °C (-40 ... 140 °F) |
|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | 90 % , noncondensing | |
| Mechanical specifications | ||
| Connection type | 5-pin, M12 x 1 connector | |
| Degree of protection | IP54 | |
| Material | ||
| Housing | ABS , PC (Polycarbonate) | |
| Mass | 500 g | |
| Dimensions | ||
| Height | 99 mm | |
| Width | 90 mm | |
| Length | 115 mm | |
| General information | ||
| Ordering information | Mounting plate included with delivery | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270918 |
| ECLASS 12.0 | 27270918 |
| ECLASS 11.0 | 27270701 |
| ECLASS 10.0.1 | 27270701 |
| ECLASS 9.0 | 27270701 |
| ECLASS 8.0 | 27270701 |
| ECLASS 5.1 | 27270701 |
| ETIM 9.0 | EC001852 |
| ETIM 8.0 | EC001852 |
| ETIM 7.0 | EC001852 |
| ETIM 6.0 | EC001852 |
| ETIM 5.0 | EC001852 |
| UNSPSC 12.1 | 41111945 |
Details: WCS3B-LS2**
Product Documentation: WCS3B-LS2**
| Manuals | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Manual WCS Electrical | ENG | 11790 KB | |
| Manual WCS Mechanical | ENG | 12338 KB |
Design / Simulation: WCS3B-LS2**
| CAD | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2923 KB |
Approvals: WCS3B-LS2**
| Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| Canada USA CSA Ordinary Location | 1007121 | ALL | 198 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0909F | ALL | 87 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6636A | ALL | 84 KB | |
Pepperl+Fuchs N.V.
Metropoolstraat 11
2900 Schoten / Anvers
BELGIË
BTW BE 0436.097.152, RPR Antwerpen, afd. Antw.
sales@be.pepperl-fuchs.com
+32 3 644 25 00
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.