Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Faça o download das folhas de dados em PDF:
Folhas de dados: Dados técnicos do
OMT100-R100-2EP-IO
| Descrição do Produto |
| Measurement to object, 100 mm detection range, red light, measured value via IO-Link, 2 x push-pull output, 2 m fixed cable |
| General specifications |
| Measuring range | 40 ... 100 mm |
| Reference target | standard white, 100 mm x 100 mm |
| Light source | LED |
| Light type | modulated visible red light |
| LED risk group labelling | exempt group |
| Angle deviation | max. +/- 1.5 ° |
| Diameter of the light spot | approx. 8 mm at a distance of 100 mm |
| Opening angle | 4 ° |
| Ambient light limit | EN 60947-5-2 : 30000 Lux |
| Resolution | 0.1 mm |
| Functional safety related parameters |
| MTTFd | 600 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode |
| Function indicator | LED yellow:
constantly on - switch output active
constantly off - switch output inactive |
| Control elements | Teach-In key |
| Control elements | 5-step rotary switch for operating modes selection |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | < 25 mA at 24 V supply voltage |
| Protection class | III |
| Interface |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| IO-Link revision | 1.1 |
| Device profile | Smart Sensor |
| Device ID | 0x110903 (1116419) |
| Transfer rate | COM2 (38.4 kBit/s) |
| Min. cycle time | 3 ms |
| Process data width | Process data input 3 Byte
Process data output 2 Bit |
| SIO mode support | yes |
| Compatible master port type | A |
| Output |
| Switching type | The default setting is:
C/Q - BK: NPN normally open, PNP normally closed, IO-Link
Q2 - WH: NPN normally open, PNP normally closed |
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Usage category | DC-12 and DC-13 |
| Voltage drop | ≤ 1.5 V DC |
| Response time | 2 ms |
| Conformity |
| Communication interface | IEC 61131-9 |
| Product standard | EN 60947-5-2 |
| Measurement accuracy |
| Temperature drift | 0.03 %/K |
| Warm up time | 5 min |
| Repeat accuracy | ≤ 0.5 % |
| Linearity error | ± 0,75 % |
| Approvals and certificates |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Ambient conditions |
| Ambient temperature | 10 ... 60 °C (50 ... 140 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 / IP69 / IP69K |
| Connection | 2 m fixed cable |
| Material | |
| Housing | PC (Polycarbonate) |
| Optical face | PMMA |
| Mass | approx. 36 g |
| Dimensions | |
| Height | 44.5 mm |
| Width | 11 mm |
| Depth | 21.5 mm |
| Cable length | 2 m |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270903 |
| ECLASS 12.0 | 27270903 |
| ECLASS 11.0 | 27270903 |
| ECLASS 10.0.1 | 27270903 |
| ECLASS 9.0 | 27270903 |
| ECLASS 8.0 | 27270903 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC001821 |
| ETIM 8.0 | EC001821 |
| ETIM 7.0 | EC001821 |
| ETIM 6.0 | EC001821 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Details:
OMT100-R100-2EP-IO
Product Documentation:
OMT100-R100-2EP-IO
Design / Simulation:
OMT100-R100-2EP-IO
Approvals:
OMT100-R100-2EP-IO
Software:
OMT100-R100-2EP-IO
Produtos Relacionados:
OMT100-R100-2EP-IO
| Accessories |
|
|
|
| Female cordset single-ended M8 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Female cordset single-ended M8 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputsfa |
|
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputsfa |
|
|
|
|
| Ethernet IO-Link module with 8 inputs/outputsfa |
|
|
|
|
| Ethernet IO-Link module with 8 inputs/outputsfa |
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa |
|
|
|
|
| EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa |
|
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa |
|
|
|
|
|
| PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa |
|
|
|
|
| IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa |
|
+55 11 4007 1448