Digital Input LB1109A

8-channel
Inputs Ex ia
Mounting in Zone 2, Class I/Div.2 or in the safe area
Dry contact or NAMUR inputs
Positive or negative logic selectable
Simulation mode for service operations (forcing)
Line fault detection (LFD)
Permanently self-monitoring
Module can be exchanged under voltage

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
配套产品
咨询专家

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

下载PDF版完整参数表:

技术参数节选 LB1109A

Slots
Occupied slots		1
Supply
Connection		backplane bus
Rated voltage		12 V DC , only in connection with the power supplies LB9***
Power dissipation		1.55 W
Power consumption		1.55 W
Internal bus
Connection		backplane bus
Interface		manufacturer-specific bus to standard com unit
Digital input
Number of channels		8
Sensor interface
	Connection	NAMUR sensor
	Connection [2]	volt-free contact
Connection		Terminals 1+, 2-, 3+, 4-, 5+, 6-, 7+, 8-, 9+, 10-, 11+, 12-, 13+,14-, 15+, 16-
Rated values		acc. to EN 60947-5-6 (NAMUR)
Switching point/switching hysteresis		1.2 ... 2.1 mA / ± 0.2 mA
Voltage		8.2 V
Internal resistor		1 kΩ
Line fault detection		can be switched on/off for each channel via configuration tool
	Connection	mechanical switch with additional resistors (see connection diagram) proximity sensors without additional wiring
	Short-circuit	< 360 Ω
	Open-circuit	< 0.35 mA
Minimum pulse duration		15 ms
Indicators/settings
LED indication		Power LED (P) green: supply Diagnostic LED (I) red: module fault , red flashing: communication error , white: fixed parameter set (parameters from com unit are ignored) , white flashing: requests parameters from com unit Status LED (1-8) red: line fault (lead breakage or short circuit) , yellow: signal (per channel)
Coding		optional mechanical coding via front socket
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529
Environmental test		EN 60068-2-14
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Damaging gas		EN 60068-2-42
Relative humidity		EN 60068-2-78
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		95 % non-condensing
Altitude		max. 2000 m
Shock resistance		shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Vibration resistance		frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance
Damaging gas		designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Degree of protection		IP20 when mounted on backplane
Connection		removable front connector with spring terminal (0.14 ... 0.5 mm²)
Mass		approx. 90 g
Dimensions		16 x 100 x 102 mm (0.63 x 3.9 x 4 inch)
Data for application in connection with hazardous areas
EU-type examination certificate		EXA 13 ATEX 0036X
	Marking	II 3(1) G Ex nA [ia Ga] IIC T4 Gc I (M1) [Ex ia Ma] I II (1) D [Ex ia Da] IIIC
Input
	Voltage	10 V
	Current	13 mA
	Power	33 mW (linear characteristic)
Galvanic isolation
	Input/power supply, internal bus	safe electrical isolation acc. to EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 EN 60079-11:2012 EN 60079-15:2010
International approvals
ATEX approval		EXA 13 ATEX 0036X
UL approval		E106378
IECEx approval
	IECEx certificate	IECEx EXA 13.0003X
	IECEx marking	Ex nA [ia Ga] IIC T4 Gc [Ex ia Da] IIIC [Ex ia Ma] I
General information
System information		The module has to be mounted in appropriate backplanes (LB9***) in Zone 2 or outside hazardous areas. Here, observe the corresponding declaration of conformity. For use in hazardous areas (e. g. Zone 2, Zone 22 or Div. 2) the module must be installed in an appropriate enclosure.
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210121
ECLASS 12.0	27210121
ECLASS 11.0	27210121
ECLASS 10.0.1	27210121
ECLASS 9.0	27210121
ECLASS 8.0	27210121
ECLASS 5.1	27210120
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008
Product category / 产品类的	远程输入输出系统模块

Details: LB1109A

Informative Literature: LB1109A

Literature	语言	文件类型	文件大小
Application Report - Communication Redundancy for Uninterrupted Operation	ENG	PDF	529 KB
Application Report - LB and FB Remote I/O Systems for Digitally Connecting Analog Field Devices	ENG	PDF	208 KB
Application Report - Space Saving Extension for Existing Plants	ENG	PDF	300 KB
Application Report - The Modern Whiskey Distillery	ENG	PDF	176 KB
Application Report - Use of Remote I/O in Fluidized Bed Systems	ENG	PDF	222 KB
Application Report - Using Remote I/O Systems for the Efficient Digitalization of Plants	ENG	PDF	371 KB

Product Documentation: LB1109A

Safety and Security Documentation	语言	文件类型	文件大小
Instruction manual / Betriebsanleitung	CHS	PDF	343 KB
Manuals
Hardware Manual LB-Remote-I/O-System	ENG	PDF	5385 KB

Design / Simulation: LB1109A

CAD	语言	文件类型	文件大小
CAD 3-D / CAD 3-D	ALL	STP	3673 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	1763 KB

Approvals: LB1109A

Certificates	证书号码	语言	文件类型	文件大小
Brasil TUV Rheinland Brazil	TÜV 14.1600 X	ALL	PDF	1224 KB
Bureau Veritas (Maritime) Marine	22449/C0 BV	ALL	PDF	590 KB
Canada UL cUL	E106378 cUL (QUZW7)	ALL	LINK	---
China SITIIAS CCC Ex Certificate	2020322310002776 (Singapore)	ALL	PDF	1374 KB
DNV Marine	TAA0000034	ALL	PDF	110 KB
EXA IECEx Certificate of Conformity Non-Sparking nA	IECEx EXA 13.0003X	ALL	LINK	---
Europe EXA ATEX Category (1) D ATEX Category (M1) ATEX Category 3 G	EXA 13 ATEX 0036X	ALL	PDF	403 KB
Lloyd's Register Marine	LR2003616TA-02	ALL	PDF	557 KB
South Africa MASC	MASC MS/20-8433X	ALL	PDF	756 KB
South Africa MASC	MASC MS/20-8436X	ALL	PDF	955 KB
USA Canada, USA UL Certificate of Compliance cULus	20161110-E106378	ALL	PDF	570 KB
USA UL	E106378 UL (QUZW)	ALL	LINK	---
United Kingdom CML UKEX Category (1) D UKEX Category (M1) UK-Type Examination Certificate UKEX Category 3 (1) G	CML 21UKEX2661X	ALL	PDF	187 KB
Control Drawings
Control drawing CSA / Control drawing CSA		ALL	PDF	225 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0373C	ALL	PDF	1143 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5373	ALL	PDF	1038 KB

配套产品: LB1109A

Accessories

	LB9130A Terminal Block
	Spring terminal, For LB modules, 8-pole, Color blue, For Ex ia or Ex ib applications, For wire end ferrules without plastic sleeve only, Construction type: spring terminalpa

General Notes Relating to Pepperl+Fuchs Product Information

转至

倍加福（北京）过程自动化控制设备有限公司
北京市经济技术开发区
科创十四街99号7号楼3101室
101111 Beijing
中国
pa-info@cn.pepperl-fuchs.com
phone +86 10 5901 7000

上海倍加福工业自动化贸易有限公司
上海市静安区市北工业园区江场三路
219号4楼
200436 上海
中国
fa-info@cn.pepperl-fuchs.com
phone +86 21 6630 3939

德国倍加福公司（P+F）是全球自动化行业中久负盛名的专业传感器公司。倍加福作为全球自动化领域的电子传感与零部件的生产主导者，凭借不断的创新，恒久的质量保证，稳健的发展，保证了迄今六十余年的辉煌成就。倍加福在全球范围内拥有6300名员工，位于德国，美国，新加坡，匈牙利，印度尼西亚和越南的生产基地几乎全部通过了ISO9001的质量认证。