Gateway for PROFINET LB8122A.1.EL

Interface between the I/O modules and the PCS/PLC
Mounting in Zone 2, Class I/Div.2 or in the safe area
Non-volatile memory for configuration and parameter settings
Communication via PROFINET
HART communication via HART I/P

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
咨询专家

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

下载PDF版完整参数表:

技术参数节选 LB8122A.1.EL

Supply
Connection		backplane bus
Rated voltage		12 V DC , only in connection with the power supplies LB9***
Nominal voltage		12 V DC ,
Power dissipation		4.53 W
Power consumption		4.53 W
Fieldbus connection
Fieldbus type		PROFINET
Ethernet Interface
Connection type		RJ-45 , via front connector
Transfer rate		10BASE-T, 100BASE-TX 100 MBit/s
Station connection		directly to PCS or PLC or via hubs or switches
Cable type		SFTP in accordance with ISO/IEC 11801 for Cat 5e or better
Bus length		max. 100 m per link
Addressing		DHCP, via controller (DCP) or fixed IP address
Ethernet address		IP V4 address (preset: DHCP on, changeable via display)
Supported I/O modules		LB1x01…LB1x03, LB1x08, LB1x09, LB2x01…LB2x17, LB3x01…LB3x06, LB4x01, LB4x02, LB4x04…LB4x06, LB5x01, LB5x02, LB5x04…LB5x06, LB6x01, LB6x05, LB6x06, LB6x08, LB6x10…LB6x17, LB7x04*
HART communication		via PROFINET and HART I/P
PROFINET conformance class		CC B
Internal bus
Connection		backplane bus
Galvanic isolation
Ethernet/other circuits		basic insulation according to IEC/EN 61010-1, rated insulation voltage 35 V_eff or 50 V DC
RS 485 interface/other circuits		basic insulation according to IEC/EN 61010-1, rated insulation voltage 35 V_eff or 50 V DC
Insulation voltage		1500 V AC acc. to IEEE 802.3u
Electrical isolation
Power supply, internal bus/other circuits		basic insulation according to IEC/EN 61010-1, rated insulation voltage 30 V DC
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1
Conformity
Degree of protection		IEC 60529
Fieldbus standard		IEEE 802.3
Environmental test		EN 60068-2-14
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Damaging gas		EN 60068-2-42
Relative humidity		EN 60068-2-56
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Relative humidity		95 % non-condensing
Shock resistance		shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Vibration resistance		frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance
Damaging gas		designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Degree of protection		IP20 (module) , mounted on backplane
Connection		via backplane
Mass		approx. 150 g
Dimensions		32.5 x 100 x 102 mm (1.28 x 3.9 x 4 inch)
Data for application in connection with hazardous areas
Certificate		DEMKO 16 ATEX 1780 X
	Marking	II 3 G Ex nA IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 EN 60079-15:2010
International approvals
ATEX approval		DEMKO 16 ATEX 1780 X
IECEx approval		IECEx UL 16.0141 X
	Approved for	Ex nA IIC T4 Gc
General information
System information		The module has to be mounted in appropriate backplanes (LB9***) in Zone 2 or outside hazardous areas. Here, observe the corresponding declaration of conformity. For use in hazardous areas (e. g. Zone 2, Zone 22 or Div. 2) the module must be installed in an appropriate enclosure.
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210121
ECLASS 12.0	27210121
ECLASS 11.0	27210121
ECLASS 10.0.1	27210121
ECLASS 9.0	27210121
ECLASS 8.0	27210121
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008
Product category / 产品类的	网关

Details: LB8122A.1.EL

Informative Literature: LB8122A.1.EL

Literature	语言	文件类型	文件大小
Application Report - Communication Redundancy for Uninterrupted Operation	ENG	PDF	529 KB
Application Report - LB and FB Remote I/O Systems for Digitally Connecting Analog Field Devices	ENG	PDF	208 KB
Application Report - Space Saving Extension for Existing Plants	ENG	PDF	300 KB

Product Documentation: LB8122A.1.EL

Brief Instructions	语言	文件类型	文件大小
Configuration instructions STEP 7	ENG	PDF	3870 KB
Configuration instructions TIA Portal	ENG	PDF	4041 KB
Safety and Security Documentation
Instruction manual	ENG	PDF	152 KB
Manuals
CFC for STEP 7	ENG	PDF	1447 KB
Hardware Manual LB-Remote-I/O-System	ENG	PDF	5385 KB
Manual	ENG	PDF	5915 KB
Software Information
Software Product Note Remote I/O DTM / Softwareproduktschein Remote I/O DTM	ALL	PDF	256 KB

Design / Simulation: LB8122A.1.EL

CAD	语言	文件类型	文件大小
CAD 3-D / CAD 3-D	ALL	STP	2652 KB

Approvals: LB8122A.1.EL

Certificates	证书号码	语言	文件类型	文件大小
China SITIIAS CCC Ex Certificate	2021322310003602 (Mannheim)	ALL	PDF	1085 KB

Software: LB8122A.1.EL

Device Description Files/Drivers	Release Info	文件类型	文件大小
GSDML file for LB/FB PROFINET Gateways LB/FB8x22 / GSDML-Datei für LB/FB PROFINET Gateways LB/FB8x22		ZIP	360 KB
CFC Device Driver Blocks for SIMATIC PCS 7 / CFC Device Driver Blocks for SIMATIC PCS 7		ZIP	15869 KB

General Notes Relating to Pepperl+Fuchs Product Information

转至

倍加福（北京）过程自动化控制设备有限公司
北京市经济技术开发区
科创十四街99号7号楼3101室
101111 Beijing
中国
pa-info@cn.pepperl-fuchs.com
phone +86 10 5901 7000

上海倍加福工业自动化贸易有限公司
上海市静安区市北工业园区江场三路
219号4楼
200436 上海
中国
fa-info@cn.pepperl-fuchs.com
phone +86 21 6630 3939

德国倍加福公司（P+F）是全球自动化行业中久负盛名的专业传感器公司。倍加福作为全球自动化领域的电子传感与零部件的生产主导者，凭借不断的创新，恒久的质量保证，稳健的发展，保证了迄今六十余年的辉煌成就。倍加福在全球范围内拥有6300名员工，位于德国，美国，新加坡，匈牙利，印度尼西亚和越南的生产基地几乎全部通过了ISO9001的质量认证。

暂不可售