NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:
请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
下载PDF版完整参数表:
通用规格 | ||
---|---|---|
开关功能 | 常闭 (NC) | |
输出类型 | NAMUR | |
额定工作距离 | 1,5 mm | |
安装 | 齐平 | |
确保操作距离 | 0 ... 1,22 mm | |
衰减系数 rAl | 0 | |
衰减系数 rCu | 0 | |
衰减系数 r304 | 0,55 | |
输出类型 | 2 线 | |
额定值 | ||
额定电压 | 8 V | |
开关频率 | 0 ... 400 Hz | |
迟滞 | 类型 5 % | |
电流消耗 | ||
未检测到测量板 | min. 3 mA | |
检测到测量板 | ≤ 1 mA | |
遵守标准和指令 | ||
符合标准 | ||
NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
|
标准 | EN IEC 60947-5-2 | |
认证和证书 | ||
UL 认证 | cULus 认证,一般用途 | |
CSA 认证 | 通过 cCSAus 认证,一般用途 | |
CCC 认证 | 额定电压 ≤ 36 V 时,产品不需要 CCC 认证/标记 | |
环境条件 | ||
环境温度 | -25 ... 100 °C (-13 ... 212 °F) | |
机械规格 | ||
连接类型 | 连接器,ZH 630 603 00 插座,ZH 632 603 00 |
|
外壳材料 | 不锈钢 1.4305 / AISI 303 | |
感应面 | 陶瓷 | |
防护等级 | IP50 | |
质量 | 167 g | |
尺寸 | ||
长度 | 50 mm | |
直径 | 18 mm |
System | Classcode |
---|---|
ECLASS 11.0 | 27270101 |
ECLASS 10.0.1 | 27270101 |
ECLASS 9.0 | 27270101 |
ECLASS 8.0 | 27270101 |
ECLASS 5.1 | 27270101 |
ETIM 7.0 | EC002714 |
ETIM 6.0 | EC002714 |
ETIM 5.0 | EC002714 |
UNSPSC 12.1 | 39121550 |
Product category / 产品类的 | 电感式传感器 |
认证 | 证书号码 | 语言 | 文件类型 | 文件大小 |
---|---|---|---|---|
Canada USA UL Ordinary Location | UL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3 | ALL | 1806 KB | |
China Information on CCC | CCC-Exempt Declaration (Pepperl+Fuchs) | ALL | 457 KB | |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3687A | ALL | 1230 KB | |
UK Declaration of Conformity (P+F) | TDOC-6202_ENG | ENG | 1284 KB |