请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
下载PDF版完整参数表:
产品阐述 |
---|
读头,SSI 接口,格雷码 |
通用规格 | ||
---|---|---|
通过速度 | ≤ 12,5 m/s | |
测量范围 | 最大 314,5 m | |
编码尺的自由公差 | 水平: 28 mm ( ± 14 mm ) 垂直: 25,5 mm ( +11.5 mm/-14 mm ) |
|
分辨率 | ± 0,4 mm (1,250 位置值/米) | |
功能性安全相关参数 | ||
MTTFd | 51 a | |
任务时间 (TM) | 10 a | |
诊断覆盖率 (DC) | 0 % | |
指示灯/操作方法 | ||
工作指示灯 | 绿色 LED:通电 | |
数据流指示器 | 黄色 LED: 数据通信激活 | |
错误指示器 | 红色 LED 闪烁: 读头离开编码尺 常亮: 内部诊断测试失败 |
|
电气技术规格 | ||
工作电压 | 10 ... 30 V DC | |
功耗 | 2 VA 在 24 V DC 时 | |
接口 | ||
接口类型 | SSI 接口 | |
数据输出码 | 格雷码 , 25 位 | |
时钟频率 | 100 ... 1000 kHz | |
暂停时间 | ≥ 20 µs 可进行双重请求,如果 tp≤ 10 µs | |
符合标准 | ||
发射干扰 | DIN EN 61000-6-4 |
|
抗扰度 | DIN EN 61000-6-2 |
|
耐冲击性 | DIN EN 60068-2-27,半正弦 30 g,18 ms | |
抗振性 | DIN EN 60068-2-6,正弦,5 g,10 - 2000 Hz,10 个循环 | |
认证和证书 | ||
CSA 认证 | cCSAus 认证,通用 2 类电源 |
|
CCC 认证 | 额定电压 ≤ 36 V 时,产品不需要 CCC 认证/标记 | |
环境条件 | ||
工作温度 | 0 ... 60 °C (32 ... 140 °F) | |
存储温度 | -40 ... 85 °C (-40 ... 185 °F) | |
机械规格 | ||
连接类型 | 8 针 M12 x 1 连接器 | |
防护等级 | IP67 / IP69 | |
材料 | ||
外壳 | PET , PC(聚碳酸酯) | |
质量 | 1000 g | |
注意 | 在没有保护外壳时禁止操作读码器! |
System | Classcode |
---|---|
ECLASS 11.0 | 27270701 |
ECLASS 10.0.1 | 27270701 |
ECLASS 9.0 | 27270701 |
ECLASS 8.0 | 27270701 |
ECLASS 5.1 | 27270701 |
ETIM 7.0 | EC001852 |
ETIM 6.0 | EC001852 |
ETIM 5.0 | EC001852 |
UNSPSC 12.1 | 41111945 |
Product category / 产品类的 | 光学位置检测仪 |
We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.
Please select the group of cookies and scripts, that you consent to.