Serviceline Industrial Sensors
Ask an Expert
Serviceline Explosion Protection
Ask an Expert
软件

Diagnostic Manager Software DTM-FC.AD*

FieldConnex® Fieldbus
DTM-FC.AD*
  • Software user interface for Advanced Diagnostic Modules
  • Simultaneous access to all ADMs of a plant
  • Embedded expert system gives pointed advice in clear text
  • Includes Commissioning Wizard, data historian, oscilloscope...
  • For FOUNDATION Fieldbus H1 and PROFIBUS PA
  • Automatic setup of diagnostic system

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

下载PDF版完整参数表:


技术参数节选  DTM-FC.AD*

产品阐述
User-Interface for Advanced Diagnostics, Professional Edition
Software
Hardware requirementsPC with 1 GHz processor and at least 512 MByte RAM
Operating systemsee release notes in the software package
LanguagesEnglish
Expert SystemBuilt-in expert system interprets behavior of each segment based on rules and gives pointed information in clear text. Precisely diagnosis causes and suggests remedies, which are easy to understand.
Physical Layer DiagnosticsBulk power health, segment voltage and current, unbalance, noise, signal level, signal polarity, jitter
Commissioning WizardGenerates reports on physical layer and communications data per device or segment. Automates repetitive tasks during commissioning.
Snapshot ExplorerUser interface to review the history of Physical Layer Measurement Reports stored.
History Data ExportExport of long-term history data to Excel and the file formats comma-separated (CSV) or binary for graphic analysis and diagram creation
Segment Focus ModeFast update of detailed measurements for a single segment
Integrated oscilloscopeDisplays fieldbus signals in waveform giving greatest detail. To aid troubleshooting activities, even seldom occuring events can be captured using the oscilloscope's many selectable trigger functions.
OPC Server InterfaceThe open OPC server interface can easily be adapted to any OPC client. It provides as a Data Access Server (Version 2.05) Summarized State information and basic diagnostic data such as the operating status of the diagnostic module and of the segments.
Remote diagnosticsFieldbus experts and maintenance contractors are enabled to review Physical Layer diagnostics from off-site.

Classifications

SystemClasscode
ECLASS 13.027242505
ECLASS 12.027242502
ECLASS 11.027242502
ECLASS 10.0.127242502
ECLASS 9.027242502
ECLASS 8.027242502
ECLASS 5.127242502
ETIM 9.0EC000757
ETIM 8.0EC001416
ETIM 7.0EC001416
ETIM 6.0EC001416
ETIM 5.0EC000809
UNSPSC 12.143232901
Product category / 产品类的

Details: DTM-FC.AD*

Product Documentation: DTM-FC.AD*

选择语言:
Product information语言文件类型文件大小
Technical Information Advanced Diagnostic with Yokogawa Plant Resource Manager (PRM)ENGPDF2551 KB
Brief Instructions
Quick Start Guide Diagnostic ManagerENGPDF1520 KB
Manuals
ManualENGPDF25397 KB
Software Information
Release Notes - Diagnostic Gateway FF DTMENGPDF284 KB
End-user software license agreement (EULA)ENGPDF37 KB

Software: DTM-FC.AD*

选择语言:
Software ToolsRelease Info文件类型文件大小
Diagnostic Gateway FF DTM / Diagnostic Gateway FF DTM2.2.3.3527ZIP65378 KB
Diagnostic Manager / Diagnostic Manager2.2.4.3610ZIP87499 KB
Pepperl+Fuchs Discovery and Configuration Tool (PFDCT) / Pepperl+Fuchs Discovery and Configuration Tool (PFDCT)2.4.0.412ZIP4773 KB

配套产品: DTM-FC.AD*

Accessory of

FieldConnex® Fieldbus, Advanced diagnostic module, plug-in module for the fieldbus power hub, Comprehensive diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canadapa
FieldConnex® Fieldbus, Advanced diagnostic kit for retrofitting advanced diagnostics, Comprehensive diagnostics for the fieldbus physical layer, Module and motherboard for retrofit of any installation, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PA, Europe, USA, Canadapa
FieldConnex® Fieldbus, Diagnostic gateway kit with Ethernet, FF-H1 interface for advanced diagnostics, System integration kit for Advanced Diagnostics, PCS integration via Diagnostic Manager or device DTM, Simple automatic setup of Advanced Diagnostics, Common alarm handling, For FOUNDATION Fieldbus and PROFIBUS PA, International, Europepa
Accessories
Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Internet download possiblepa
Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa
General Notes Relating to Pepperl+Fuchs Product Information
转至

倍加福（北京）过程自动化控制设备有限公司
北京市经济技术开发区
科创十四街99号7号楼3101室
101111 Beijing
中国
pa-info@cn.pepperl-fuchs.com
phone +86 10 5901 7000

上海倍加福工业自动化贸易有限公司
上海市静安区市北工业园区江场三路
219号4楼
200436 上海
中国
fa-info@cn.pepperl-fuchs.com
phone +86 21 6630 3939

沪ICP备20009978号  |  © 2024 版权所有。

德国倍加福公司（P+F）是全球自动化行业中久负盛名的专业传感器公司。倍加福作为全球自动化领域的电子传感与零部件的生产主导者，凭借不断的创新，恒久的质量保证，稳健的发展，保证了迄今六十余年的辉煌成就。倍加福在全球范围内拥有6300名员工，位于德国，美国，新加坡，匈牙利，印度尼西亚和越南的生产基地几乎全部通过了ISO9001的质量认证。