DTM collection DTM SC-System
- Device DTM
- For SC-System
- Frame application, like e. g. PACTware, must be installed separately
请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
下载PDF版完整参数表:
技术参数节选 DTM SC-System
| General specifications | ||
|---|---|---|
| Description | Collection of all device and communications DTMs for parameterization of SC-System devices | |
| Interface | ||
| Connection | Adapter with USB Interface | |
| Software | ||
| Hardware requirements | - processor min. 500 MHz - working memory: min. 256 MB - hard disk space: min. 200 MB - graphic resolution 1024 x 768 Depending on the complexity of the project and the DTMs used, the memory requirement may be several times higher. |
|
| Software requirements | operating system: - Microsoft Windows 7, Windows 8 or Windows 10 internet browser: - Microsoft Internet Explorer 4.0 or higher software components for installation - Microsoft .Net Framework 3.5 or higher - FDT framework program PACTware 5.X - the application-specific device type manager |
|
| Languages | German, English, French, Spanish, Russian can be selected | |
| Licensing | The Pepperl+Fuchs DTM-Collections can be downloaded separately or altogether in a version with basic license. This version can also be obtained on CD-ROM from Pepperl+Fuchs. Basic license: The software remains a basic version after installation under the terms of a basic license that may have limited features. The basic license is delivered free of charge. Full license: The full license can only be activated by an individual license key number and transfers a basic version of software to a full version under the term of a full license. The software under these terms can be installed on more than one workstation simultaneously. The full licenses with the functionality quoted in the following can be ordered at Pepperl+Fuchs. |
|
| Installation | Administrator rights are required For installation in Windows. | |
| Configuration | ||
| Representation of the system configuration | Graphic representation of all communication and device type managers in the tree structure. In case of online operation colour code for identification of defective units and simulation operation. Multiple windows can be opened simultaneously. It is therefore possible to view the set device parameters, to monitor the measurement value and to display the device diagnostic simultaneously. | |
| System planning, application processing | Generation of a configuration by means of a graphical application processing menu. Editing of available projects. Selection switch markings for each channel. Offline configuration, saving of project data to hard disk. Automatic comparison of the project plan to the actual available system when establishing connections on the device and parameter levels. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242505 |
| ECLASS 12.0 | 27242502 |
| ECLASS 11.0 | 27242502 |
| ECLASS 10.0.1 | 27242502 |
| ECLASS 9.0 | 27242502 |
| ECLASS 8.0 | 27242502 |
| ECLASS 5.1 | 27242502 |
| ETIM 9.0 | EC000757 |
| ETIM 8.0 | EC001416 |
| ETIM 7.0 | EC001416 |
| ETIM 6.0 | EC001416 |
| ETIM 5.0 | EC000809 |
| UNSPSC 12.1 | 43232901 |
| Product category / 产品类的 |
Details: DTM SC-System
Product Documentation: DTM SC-System
| Manuals | 语言 | 文件类型 | 文件大小 |
|---|---|---|---|
| Installation and configuration guide Device Type Manager (DTM) | ENG | 8665 KB |
Software: DTM SC-System
| Device Description Files/Drivers | Release Info | 文件类型 | 文件大小 |
|---|---|---|---|
| DTM for S1SD-1TI-1U / DTM für S1SD-1TI-1U | ZIP | --- |
配套产品: DTM SC-System
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
倍加福（北京）过程自动化控制设备有限公司
北京市经济技术开发区
科创十四街99号7号楼3101室
101111 Beijing
中国
pa-info@cn.pepperl-fuchs.com
+86 10 5901 7000
上海倍加福工业自动化贸易有限公司
上海市静安区市北工业园区江场三路
219号4楼
200436 上海
中国
fa-info@cn.pepperl-fuchs.com
+86 21 6630 3939
沪ICP备20009978号 | © 2024 版权所有。
德国倍加福公司（P+F）是全球自动化行业中久负盛名的专业传感器公司。倍加福作为全球自动化领域的电子传感与零部件的生产主导者，凭借不断的创新，恒久的质量保证，稳健的发展，保证了迄今六十余年的辉煌成就。倍加福在全球范围内拥有6300名员工，位于德国，美国，新加坡，匈牙利，印度尼西亚和越南的生产基地几乎全部通过了ISO9001的质量认证。