Com Unit for MODBUS RTU FB8207*

Interface between the I/O modules and the PCS/PLC
Com unit for 80 analog or 184 digital channels
Communication via MODBUS RTU
Installation in suitable enclosures in Zone 1
Module can be exchanged under voltage (hot swap)
HART communication via service bus
Configuration via FDT 1.2 DTM
Non-volatile memory for configuration and parameter settings
Self configuration in redundant systems
Permanently self-monitoring
Outputs drive to safe state in case of failures

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
配套产品
咨询专家

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

下载PDF版完整参数表:

技术参数节选 FB8207*

产品阐述
Com Unit for MODBUS RTU

Supply
Connection		backplane bus
Rated voltage		5 V DC , only in connection with the power supplies FB92**
Power consumption		2 W
Fieldbus connection
Fieldbus type		MODBUS RTU
MODBUS RTU
	Connection	wired to Ex e terminals via backplane
	Baud rate	max. 38.4 kBit/s
Number of stations per bus line		max. 245 (MODBUS), max. 119 (service bus)
Number of channels per station		max. 80 analog, max. 184 digital (standard configuration)
Number of stations per bus segment		max. 31 (RS-485 standard)
Number of repeaters between Master and Slave		max. 3
Supported I/O modules		all FB remote I/O modules
Bus length		max. 1200 m (FOL, 38.4 kBd), max. 1200 m (copper cable, 38.4 kBd)
FOL (fiber optic link)		additional hardware required
Addressing		via configuration software
MODBUS address		standard compliant (factory standard setting: 126)
Service bus address		max. 119 , redundancy address = base + 128 (automatic)
HART communication		via service bus
Internal bus
Connection		backplane bus
Redundancy		via front connector
Indicators/settings
LED indicator		LED green (power supply): On = operating, fast flash = cold start LED red (collective alarm): On = internal fault, flashing = no Modbus RTU connection LED yellow (operating mode): flashing 1 (1:1 ratio) = active, normal operation; flashing 2 (7:1 ratio) = active, simulation
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Relative humidity		95 % non-condensing
Shock resistance		shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Vibration resistance		frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance
Damaging gas		designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Degree of protection		IP20 (module) , a separate housing is required acc. to the system description
Connection		via backplane
Mass		approx. 750 g
Dimensions		57 x 107 x 132 mm (2.2 x 4.2 x 5.2 inch)
Data for application in connection with hazardous areas
EU-Type Examination Certificate		PTB 97 ATEX 1074 U
	Marking	II 2(1) G Ex d [ia Ga] IIC Gb
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2009 EN 60079-1:2007 EN 60079-11:2007 EN 60079-26:2007 EN 61241-11:2006
International approvals
ATEX approval		PTB 97 ATEX 1075
EAC approval		Russia: RU C-IT.MIII06.B.00129
Marine approval
	Lloyd Register	15/20021
	DNV GL Marine	TAA0000034
	American Bureau of Shipping	T1450280/UN
	Bureau Veritas Marine	22449/B0 BV

Classifications

System	Classcode
ECLASS 13.0	27210121
ECLASS 12.0	27210121
ECLASS 11.0	27210121
ECLASS 10.0.1	27210121
ECLASS 9.0	27210121
ECLASS 8.0	27210121
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008
Product category / 产品类的

Details: FB8207*

Informative Literature: FB8207*

Literature	语言	文件类型	文件大小
Application Report - Communication Redundancy for Uninterrupted Operation	ENG	PDF	529 KB
Application Report - LB and FB Remote I/O Systems for Digitally Connecting Analog Field Devices	ENG	PDF	208 KB
Application Report - Space Saving Extension for Existing Plants	ENG	PDF	300 KB
Application Report - Using Remote I/O Systems for the Efficient Digitalization of Plants	ENG	PDF	371 KB

Product Documentation: FB8207*

System Descriptions	语言	文件类型	文件大小
Supported I/O modules	ENG	PDF	31 KB
Safety and Security Documentation
Instruction manual	ENG	PDF	65 KB
Manuals
Manual - FB-Remote-I/O-System	ENG	PDF	5670 KB
Manual for LB8107/FB8207, LB8111/FB8211 com unit for MODBUS RTU/TCP	ENG	PDF	6849 KB
Software Information
Software Product Note Remote I/O DTM / Softwareproduktschein Remote I/O DTM	ALL	PDF	256 KB

Design / Simulation: FB8207*

CAE	语言	文件类型	文件大小
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	144 KB

Approvals: FB8207*

Certificates	证书号码	语言	文件类型	文件大小
Bureau Veritas (Maritime) Marine	22449/C0 BV	ALL	PDF	590 KB
DNV Marine	TAA0000034	ALL	PDF	110 KB
Europe PTB ATEX Category 2 G	PTB 97 ATEX 1074U	ALL	PDF	2619 KB
Lloyd's Register Marine	LR2003616TA-02	ALL	PDF	557 KB
United Kingdom CML UK-Type Examination Certificate UKEX Category (1) D UKEX Category (1) G UKEX Category (M1)	CML 23UKEX2147U	ALL	PDF	242 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)	TDOC-1908FENG	ENG	PDF	1142 KB

Software: FB8207*

Software Tools	Release Info	文件类型	文件大小
LB/FB Remote I/O DTM Version 6.8.1 / LB/FB Remote I/O DTM Version 6.8.1	Version 6.8.1.	ZIP	40682 KB
Tools to configure LB/FB Remote I/O without DTM / Tools zur LB/FB-Remote-I/O-Konfiguration ohne DTM	35/2010	ZIP	51019 KB

配套产品: FB8207*

Accessories

	DTM LB/FB DTM collection
	Device DTM, For Remote I/O systems, Frame application, like e. g. PACTware, must be installed separatelypa

General Notes Relating to Pepperl+Fuchs Product Information

快速链接

倍加福（北京）过程自动化控制设备有限公司
北京市经济技术开发区
科创十四街99号7号楼3101室
101111 Beijing
中国
pa-info@cn.pepperl-fuchs.com
phone +86 10 5901 7000

上海倍加福工业自动化贸易有限公司
上海市静安区市北工业园区江场三路
219号4楼
200436 上海
中国
fa-info@cn.pepperl-fuchs.com
phone +86 21 6630 3939

德国倍加福公司（P+F）是全球自动化行业中久负盛名的专业传感器公司。倍加福作为全球自动化领域的电子传感与零部件的生产主导者，凭借不断的创新，恒久的质量保证，稳健的发展，保证了迄今六十余年的辉煌成就。倍加福在全球范围内拥有6300名员工，位于德国，美国，新加坡，匈牙利，印度尼西亚和越南的生产基地几乎全部通过了ISO9001的质量认证。