Repeater KFD0-CS-1.50

1-channel signal conditioner
24 V DC supply (loop powered)
Current input/output 4 mA ... 20 mA
transmitter power supply
Accuracy 0.1 %
Reverse polarity protection
Up to SIL 2 acc. to IEC/EN 61508

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
配套产品
咨询专家

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

下载PDF版完整参数表:

技术参数节选 KFD0-CS-1.50

General specifications
Signal type		Analog input/analog output
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 2
Supply
Rated voltage		10 ... 35 V DC , loop powered
Power dissipation		0.2 W
Control circuit
Connection		terminals 12-, 11+
Voltage		10 ... 35 V DC
Current		4 ... 20 mA
Power dissipation		< 150 mW per channel at 25 mA and U < 26.1 V < 400 mW per channel at 25 mA und U > 26.1 V
Field circuit
Connection		terminals 1+, 2-
Voltage		≥ 0.9 x U_in - (0.23 x current in mA) - 0.7 for 10 V < U_in < 26.1 V ≥ 23 V - (0.23 x current in mA) for U_in > 26.1 V
Short-circuit current		max. 100 mA
Transfer current		max. 25 mA
Transfer characteristics
Accuracy		0.1 %
Deviation
	After calibration	U_in ≥ 5 V ± 20 µA/U_in ≤ 5 V ± 50 µA incl. calibration, linearity, hysteresis and output load fluctuations at the field side; at 20 °C (68 °F)
	Influence of ambient temperature	≤ ± 2 µA/K at U_in ≤ 20 V; ≤ ± 5 µA/K at U_in > 20 V
Rise time		≤ 5 ms at 4 ... 20 mA and U_in = input voltage < 26 V
Galvanic isolation
Input/Output		basic insulation according to IEC 62103, rated insulation voltage 300 V_eff
Indicators/settings
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2012 EN 61326-3-2:2008
Degree of protection		IEC 60529:2001
Protection against electrical shock		EN 61010-1:2010
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 100 g
Dimensions		20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210120
ECLASS 12.0	27210120
ECLASS 11.0	27210120
ECLASS 10.0.1	27210120
ECLASS 9.0	27210120
ECLASS 8.0	27210120
ECLASS 5.1	27210120
ETIM 9.0	EC002653
ETIM 8.0	EC002653
ETIM 7.0	EC002653
ETIM 6.0	EC002653
ETIM 5.0	EC001485
UNSPSC 12.1	32101514
Product category / 产品类的	信号调节器

Details: KFD0-CS-1.50

Informative Literature: KFD0-CS-1.50

Literature	语言	文件类型	文件大小
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB

Product Documentation: KFD0-CS-1.50

Safety and Security Documentation	语言	文件类型	文件大小
Instruction manual	ENG	PDF	41 KB
Functional Safety Manual	ENG	PDF	1969 KB
Manuals
System Manual	ENG	PDF	3694 KB

Design / Simulation: KFD0-CS-1.50

CAD	语言	文件类型	文件大小
CAD 3-D / CAD 3-D	ALL	STP	1871 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	44 KB

Approvals: KFD0-CS-1.50

Certificates	证书号码	语言	文件类型	文件大小
DNV Marine	TAA00001WX	ALL	PDF	106 KB

配套产品: KFD0-CS-1.50

Matching System Components

	K-DUCT-GY Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of field and control signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

Accessories

	KF-ST-5GN Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

General Notes Relating to Pepperl+Fuchs Product Information

快速链接

安全产品选型

通过各种选项进行选择，如安全完整性水平SIL，性能等级，功能及信号类型，并找到您正在寻找的经过 SIL/PL 评估的设备。

倍加福（北京）过程自动化控制设备有限公司
北京市经济技术开发区
科创十四街99号7号楼3101室
101111 Beijing
中国
pa-info@cn.pepperl-fuchs.com
phone +86 10 5901 7000

上海倍加福工业自动化贸易有限公司
上海市静安区市北工业园区江场三路
219号4楼
200436 上海
中国
fa-info@cn.pepperl-fuchs.com
phone +86 21 6630 3939

德国倍加福公司（P+F）是全球自动化行业中久负盛名的专业传感器公司。倍加福作为全球自动化领域的电子传感与零部件的生产主导者，凭借不断的创新，恒久的质量保证，稳健的发展，保证了迄今六十余年的辉煌成就。倍加福在全球范围内拥有6300名员工，位于德国，美国，新加坡，匈牙利，印度尼西亚和越南的生产基地几乎全部通过了ISO9001的质量认证。