| General specifications |
| Signal type | Digital Input |
| Supply |
| Connection | terminals 14, 15 |
| Rated voltage | 207 ... 253 V AC, 45 ... 65 Hz |
| Rated current | ≤ 7 mA |
| Power consumption | < 1.2 W |
| Input |
| Connection side | field side |
| Connection | terminals 1 (mass), 2 (min), 3 (max) |
| Control input | min./max. control system: terminals 1, 2, 3
on/off control system: terminals 1, 3 |
| Response sensitivity | 1 ... 150 kΩ , adjustable via potentiometer |
| Output |
| Connection side | control side |
| Connection | terminals 7, 8, 9; 10, 11, 12 |
| Switching power | max. 192 W , 2000 VA |
| Output | signal ; relay |
| Contact loading | 253 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load |
| Time constant for signal damping | 0.5 s, 2 s, 5 s, 10 s |
| Galvanic isolation |
| Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Indicators/settings |
| Display elements | LEDs |
| Control elements | DIP switch
potentiometer |
| Configuration | via DIP switches
via potentiometer |
| Labeling | space for labeling at the front |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Low voltage | |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Conformity |
| Electromagnetic compatibility | NE 21:2006 |
| Degree of protection | IEC 60529:2001 |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
| Degree of protection | IP20 |
| Connection | screw terminals , max. 2.5 mm2 |
| Mass | approx. 150 g |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2 |
| Height | 119 mm |
| Width | 20 mm |
| Depth | 115 mm |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Data for application in connection with hazardous areas |
| EU-type examination certificate | DMT 00 ATEX E 032 |
| Marking |  II (1)G [EEx ia] IIC [circuit(s) in zone 0/1/2] |
| Input | [EEx ia] IIC |
| Voltage | 10 V |
| Current | 2.5 mA |
| Power | 6 mW |
| Supply | |
| Maximum safe voltage | 265 V AC (Attention! Um is no rated voltage.) |
| Output | |
| Contact loading | 253 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load |
| Galvanic isolation | |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013, EN 60079-11:2012 |
| General information |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
+86 10 5901 7000