Surge Protection Barrier M-LB-2114

Surge protection barrier for 2 signal lines
Nominal voltage 1 V DC
Surge protection barrier for grounded signal lines
Max. surge current (8/20 µs) 20 kA
Connection via screw terminals
DIN rail mountable
Up to SIL 3 acc. to IEC/EN 61508

Technical Data
Product Documentation
Design / Simulation
Approvals
配套产品
咨询专家

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

下载PDF版完整参数表:

技术参数节选 M-LB-2114

General specifications
Number of protected signal lines		2
Topology		grounded
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Electrical specifications
Connection		protected area: terminals 4, 5 unprotected area: terminals 2, 3 shielding/grounding: terminal 1 (optional)
Rated current		500 mA , restrictions see derating tables UL : 400 mA , restrictions see derating tables
Leakage current		< 10 µA at 1 V and 25 °C (77 °F) , line-line
Nominal voltage		1 V DC
Maximum continuous operating voltage		6 V DC
Series resistance		≤ 3 Ω per line
Impulse rating		1 kV/0.5 kA (category C1) 10 kV/5 kA (category C2) 1 kA (category D1)
Impulse discharge current (10/350 µs)		1 kA per line (2x)
Nominal discharge current (8/20 µs)		5 kA per line (10x)
Total discharge current (8/20 µs)		20 kA (1x) , overstressed fault mode 3 acc. to IEC 61643-21
Voltage protection level		max. 12 V line-line for nominal discharge current I_n max. 31 V line-earth for nominal discharge current I_n
Impulse reset time		< 500 ms
Insertion loss		≤ 3 dB at 0 ... 250 kHz in 100 Ω system
Conformity
Electromagnetic compatibility		EN 61326-3-1:2017
Degree of protection		IEC 60529:2013
Functional safety		IEC/EN 61508:2010
Surge protective devices for low voltage		IEC 61643-21:2000+A1:2008+A2:2012
Ambient conditions
Ambient temperature		-40 ... 80 °C (-40 ... 176 °F) Observe the temperature range limited by derating, see section derating.
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		max. 95 % , without condensation
Corrosion resistance		acc. to ISA-S71.04, severity level G3
Mechanical specifications
Degree of protection		IP20 , after mounting of the insulation spacer
Connection		screw terminals , max. core cross section 1 x 2.5 mm²
Material		Polyamide (PA)
Mass		approx. 32 g
Dimensions		6.2 x 93 x 72.4 mm (0.24 x 3.7 x 2.8 inch) (W x H x D)
	Height	93 mm
	Width	6.2 mm
	Depth	72.4 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
Certificate		KIWA 19 ATEX 0002 X
	Marking	II 3G Ex ec IIC T6...T4 Gc
	Temperature class	T6, T5 or T4 , restrictions see derating tables
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018
International approvals
UL approval		E501704 E501881
	Breakdown voltage	6 ... 12 V line-line at 100 V/s acc. to UL 497B 6 ... 12 V line-earth at 100 V/s acc. to UL 497B < 1000 V at 100 V/µs acc. to UL 497B
IECEx approval
	IECEx certificate	IECEx KIWA 19.0002X
	IECEx marking	Ex ec IIC T6...T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27171202
ECLASS 12.0	27171202
ECLASS 11.0	27130805
ECLASS 10.0.1	27130805
ECLASS 9.0	27130805
ECLASS 8.0	27130805
ECLASS 5.1	27130801
ETIM 9.0	EC000941
ETIM 8.0	EC000941
ETIM 7.0	EC000941
ETIM 6.0	EC000941
ETIM 5.0	EC000941
UNSPSC 12.1	39121610
Product category / 产品类的	浪涌保护器

Details: M-LB-2114

Product Documentation: M-LB-2114

Safety and Security Documentation	语言	文件类型	文件大小
Instruction manual / Betriebsanleitung	CHS	PDF	326 KB
Functional Safety Manual	ENG	PDF	602 KB
Manuals
Manual	ENG	PDF	3280 KB

Design / Simulation: M-LB-2114

CAD	语言	文件类型	文件大小
CAD 3-D / CAD 3-D	ALL	STP	3675 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	145 KB
EPLAN macro P+F.M-LB-2114 with accessories / EPLAN-Makro P+F.M-LB-2114 mit Zubehör	ALL	EDZ	205 KB

Approvals: M-LB-2114

Certificates	证书号码	语言	文件类型	文件大小
Canada, USA UL Hazardous Location	CoC 20211011 - E501881 RepRef 20210517	ALL	PDF	421 KB
China SITIIAS CCC Ex Certificate	2020322304002905 (Singapore)	ALL	PDF	1097 KB
Europe KIWA ATEX Category 3 G	KIWA 19 ATEX 0002 X	ALL	PDF	90 KB
India PESO (India) CCOE	A/P/HQ/KA/104/6096 (P579052)	ALL	PDF	106 KB
USA UL UL	UL-US-2006718-2	ALL	PDF	317 KB
Worldwide CSA IECEx Certificate of Conformity	IECEx KIWA 19.0002X	ALL	LINK	---
Worldwide ÖVE (Austria) Surge Protective Device	AT 4406	ALL	PDF	352 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)	TDOC-4286CENG	ENG	PDF	185 KB

配套产品: M-LB-2114

Matching System Components

	USLKG6N Terminal Block
	Accessory Surge Protection, For equipotential bonding via DIN mounting railpa

Accessories

	M-LB-2800 Insulation Spacer
	For surge protection system M-LB-2000, Color black, DIN rail mountablepa

General Notes Relating to Pepperl+Fuchs Product Information

快速链接

安全产品选型

通过各种选项进行选择，如安全完整性水平SIL，性能等级，功能及信号类型，并找到您正在寻找的经过 SIL/PL 评估的设备。

访问功能安全模块

提供数百种产品以及产品的 SIL/PL 评定、免费工具和手册：“功能安全模块”是您实施安全功能的起点。

倍加福（北京）过程自动化控制设备有限公司
北京市经济技术开发区
科创十四街99号7号楼3101室
101111 Beijing
中国
pa-info@cn.pepperl-fuchs.com
phone +86 10 5901 7000

上海倍加福工业自动化贸易有限公司
上海市静安区市北工业园区江场三路
219号4楼
200436 上海
中国
fa-info@cn.pepperl-fuchs.com
phone +86 21 6630 3939

德国倍加福公司（P+F）是全球自动化行业中久负盛名的专业传感器公司。倍加福作为全球自动化领域的电子传感与零部件的生产主导者，凭借不断的创新，恒久的质量保证，稳健的发展，保证了迄今六十余年的辉煌成就。倍加福在全球范围内拥有6300名员工，位于德国，美国，新加坡，匈牙利，印度尼西亚和越南的生产基地几乎全部通过了ISO9001的质量认证。