Serviceline Industrial Sensors
Ask an Expert
Serviceline Explosion Protection
Ask an Expert
防爆产品

Pressure Transmitter LHC-M51

LHC-M51
  • Device for absolute pressure and gauge pressure measurement in gases, steams or liquids
  • Large selection of process connections: universal use
  • Temperature range up to 130 °C (266 °F)
  • Pressure range up to 400 bar (6000 psi)
  • Easy commissioning without the need for an operating tool
  • Configurable by PACTware

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

下载PDF版完整参数表:


技术参数节选  LHC-M51

General specifications
Construction typesensor: silicium sensor
metall diaphragm
SeriesLHC-M51
Supply
Rated voltageversions for safe area:
11.5 ... 45 V DC, 2-wire
11.5 ... 35 V DC, HART, 2-wire
9 ... 32 V DC, PROFIBUS PA
version for hazardous area see safety information (SI)
Input
Measured variableabsolute or relative pressure
Measuring range0.4 ... 400 bar
max. turn down: 100:1
Output
Output signal4 ... 20 mA , analog , 2-wire
4 ... 20 mA with superimposed digital communication protocol HART 6.0, 2-wire
digital communication signal PROFIBUS PA (Profile 3.02)
Communication4 ... 20 mA HART (standard)
PROFIBUS PA (option)
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2006 , EN 61326-2-3:2006 , EN 61326-2-5:2006
Low voltage
Directive 2014/35/EUEN 61010-1:2010
Conformity
Degree of protectionIEC 60529:2001
Measurement accuracy
Accuracyreference accuracy: ±0.15 % (standard), ±0.075 % (platinum)
The reference accuracy comprises the non-linearity according to limit point setting, hysteresis and non-reproducibility acc. to IEC 60770. The data refer to the calibrated span.
Long-term driftup to ±0.1 % of upper range limit (URL)/year
Operating conditions
Process conditions
Process temperature-40 ... 125 °C (-40 ... 257 °F)
hygienic versions: -40 ... 130 °C (-40 ... 266 °F), 150 °C/1h (302 °F/1h)
Ambient conditions
Ambient temperature-40 ... 85 °C (-40 ... 185 °F)
with display : -20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protectionIP66, NEMA 4X
IP68, NEMA 6P (24 hours in water 1.83 m (6 ft) deep)
IP69K (with separate housing and FEP cable)
Connectiongland M20
thread M20, G1/2, NPT1/2
device plug M12
HAN7D Harting connector, angled
valve connector acc. ISO 4400, cable 5 m
Materialmaterials in contact with process : 316L, Alloy C, rhodium>gold
housing:
- die-cast aluminum with protective powder-coating on polyester base, housing F31
- stainless steel AISI 316L (1.4404), housing F15
measuring cell seal: no, welded measuring cell
Process connectionthreads ISO 228: G1/2, G1, G1-1/2, G2
threads ANSI: NPT1/2, NPT1, NPT1-1/2, NPT2
hygienic process connections: Clamp, Varivent, DRD, DIN 11851, DIN 11864, NEUMO, APV, uni adapter
flanges: EN 1092-1: DN 25 ... DN 80, ANSI 16.5: 1 ... 4 inch, JIS B2220
Data for application in connection with hazardous areas
EU-type examination certificatesee instruction manuals (SI)
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-31:2009
International approvals
FM approvalsee instruction manuals (SI)
CSA approvalsee instruction manuals (SI)
IECEx approvalsee instruction manuals (SI)
Certificates and approvals
Drinking water approvalNSF61 approval
General information
Supplementary documentationtechnical information (TI)
manuals, brief instructions (BA, KA)
instruction manuals (SI)
control drawings (ZD)
approval (ZE)
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Accessories
Designationsee technical information (TI)

Classifications

SystemClasscode
ECLASS 13.027200516
ECLASS 12.027200516
ECLASS 11.027200516
ECLASS 10.0.127200516
ECLASS 9.027200516
ECLASS 8.027200516
ECLASS 5.127200516
ETIM 9.0EC001447
ETIM 8.0EC001447
ETIM 7.0EC001447
ETIM 6.0EC001447
ETIM 5.0EC001447
UNSPSC 12.141111950
Product category / 产品类的静压式液位计变送器

Details: LHC-M51

Product Documentation: LHC-M51

选择语言:
Product information语言文件类型文件大小
TI00436O, Technical Information LHC, PPCENGPDF8119 KB
Brief Instructions
KA1030O, brief instructions LHC-M51, PPC-M51 4 mA ... 20 mA HARTENGPDF1633 KB
KA1031O, brief instructions LHC-M51, PPC-M51 PROFIBUS PAENGPDF5215 KB
KA1036O, brief instructions LHC-M51, PPC-M51 4 mA ... 20 mA AnalogENGPDF802 KB
Safety and Security Documentation
SI00466O, Instruction manual LHC-M51, PPC-M51ENGPDF1246 KB
SI00469O, Instruction manual LHC-M51, PPC-M51ENGPDF675 KB
SI00489O, Instruction manual LHC-M51, PPC-M51ENGPDF836 KB
Safety ManualENGPDF1293 KB
Safety ManualENGPDF1268 KB
Manuals
BA382O, Manual LHC-M51, PPC-M51 4 mA ... 20 mA HARTENGPDF2974 KB
BA383O, Manual LHC-M51, PPC-M51 PROFIBUS PAENGPDF2820 KB
BA385O, Manual LHC-M51, PPC-M51 4 mA ... 20 mA AnalogENGPDF1512 KB

Design / Simulation: LHC-M51

选择语言:
CAD语言文件类型文件大小
CAD 3-D / CAD 3-DALLSTP1592 KB
CAD 3-D additional / CAD 3-D additionalALLSTP1312 KB
CAD Portal / CAD PortalALLLINK---

Approvals: LHC-M51

选择语言:
Certificates证书号码语言文件类型文件大小
Canada, USA CSACSA 14.70009779ALLPDF100 KB
DEKRA Ex ia Ex ta Ex ic IECEx Certificate of ConformityIECEx DEK 13.0056ALLLINK---
Europe DEKRA ATEX Category 1/2 D ATEX Category 2 G ATEX Category 1/2 GDEKRA 13 ATEX 0142ALLPDF306 KB
Europe Pepperl+Fuchs ATEX Category 3 G CertificatePF 13 CERT 2814 XALLPDF193 KB
Europe Pepperl+Fuchs ATEX Category 3 G CertificatePF 13 CERT 2815ALLPDF225 KB
Control Drawings
Control drawing CSA / Control drawing CSA   ALLPDF112 KB
Control drawing CSA / Control drawing CSA   ALLPDF100 KB
SI00563O, Instruction manual FM LHC-M51, PPC-M51 4 ... 20 mA HART   ENGPDF156 KB
SI00564O, Instruction manual FM LHC-M51, PPC-M51 PROFIBUS PA   ENGPDF169 KB
Control drawing CSA / Control drawing CSA   ALLPDF108 KB
Control drawing CSA / Control drawing CSA   ALLPDF99 KB
SI00556O, Instruction manual CSA LHC-M51, PPC-M51 4 ... 20 mA HART   ENGPDF154 KB
SI00558O, Instruction manual CSA LHC-M51, PPC-M51 PROFIBUS PA   ENGPDF164 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0213EALLPDF257 KB
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0251BALLPDF107 KB
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0249BALLPDF120 KB
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0247BALLPDF121 KB
Contamination Declaration
Contamination declaration / Kontaminationserklärung   ALLPDF137 KB

Software: LHC-M51

选择语言:
Device Description Files/DriversRelease Info文件类型文件大小
GSD / GSDPF__0E3A.GSDZIP11 KB

配套产品: LHC-M51

Accessories
Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa
Device DTM, For level devices, Frame application, like e. g. PACTware, must be installed separatelypa
General Notes Relating to Pepperl+Fuchs Product Information
倍加福的功能安全模块

提供数百种产品以及产品的 SIL/PL 评定、免费工具和手册：“功能安全模块”是您实施安全功能的起点。

倍加福（北京）过程自动化控制设备有限公司
北京市经济技术开发区
科创十四街99号7号楼3101室
101111 Beijing
中国
pa-info@cn.pepperl-fuchs.com
phone +86 10 5901 7000

上海倍加福工业自动化贸易有限公司
上海市静安区市北工业园区江场三路
219号4楼
200436 上海
中国
fa-info@cn.pepperl-fuchs.com
phone +86 21 6630 3939

沪ICP备20009978号  |  © 2024 版权所有。

德国倍加福公司（P+F）是全球自动化行业中久负盛名的专业传感器公司。倍加福作为全球自动化领域的电子传感与零部件的生产主导者，凭借不断的创新，恒久的质量保证，稳健的发展，保证了迄今六十余年的辉煌成就。倍加福在全球范围内拥有6300名员工，位于德国，美国，新加坡，匈牙利，印度尼西亚和越南的生产基地几乎全部通过了ISO9001的质量认证。