Serviceline Industrial Sensors
Serviceline Explosion Protection

Headset LiteCom PRO III Ex Neckband 403-470 MHz

LiteCom PRO III Ex Neckband 403-470 MHz
  • Programmable analog/digital DMR two-way radio communication
  • Bluetooth® multipoint functionality
  • Water tight microphone (IP68)
  • Environmental listening with level-dependent hearing protection
  • Voice menu with multiple language selection
  • Push-to-Listen function
  • Rechargeable Li-Ion battery and battery status indication
  • Voice operated transmission (VOX)
  • Busy channel indication
  • Auto power off function
  • ATEX and IECEx approvals

请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。

下载PDF版完整参数表:


技术参数节选  LiteCom PRO III Ex Neckband 403-470 MHz

产品阐述
3M™ PELTOR™ WS™ LiteCom Pro III Ex Headset, 403-470 MHz, Analog/Digital, Ex, EU version, Neckband
General specifications
DescriptionBehind-The-Neck
Hardware
MicrophoneDynamic (MT73)
Two-way radio
Frequency range403 ... 470 MHz
Operating modeSimplex
Channels70 programmable channels
Channel grid12,5 kHz and 25 kHz
ModulationAnalog: 2,5 kHz (FM) and 5 kHz (FM)
Digital: 2,5 kHz (4-level FSK)
Sensitivity (Receiver)Typical -120 dBm
Selective squelchProgrammable (supports CTCSS and DCS)
Power Output200 / 20 / 10 mW ER
Detection rangeOutdoors up to 2 km depending on conditions
Electrical specifications
Battery typeLi-ion 3.7 V , 1350 mAh , 5 Wh
Charging timeapprox. 12 h
Operating duration8 h * (90 stby / 5 tx / 5 rx)
* can be increased up to 12 hours with the power save feature
Ambient conditions
Operating temperature-20 ... 50 °C (-4 ... 122 °F)
Storage temperature-20 ... 55 °C (-4 ... 131 °F)
< 90 % Humidity
Mechanical specifications
Mass475 g
Data for application in connection with hazardous areas
ATEX approval
ATEX certificatePresafe 16ATEX8960X
ATEX markingI M1 Ex ia I Ma -20°C ≤ Ta: ≤ +50°C
II 1G Ex ia IIC T4 Ga -20°C ≤ Ta ≤ +50°C Ga
II 1D Ex ia IIIC T130°C Da -20°C ≤ Ta ≤ +50°C
International approvals
IECEx approval
IECEx certificatePresafe 16.0086X
IECEx markingEx ia I Ma -20°C ≤ Ta: ≤ +50°C
Ex ia IIC T4 Ga -20°C ≤ Ta ≤ +50°C
Ex ia IIIC T130°C Da -20°C ≤ Ta ≤ +50°C
General information
Scope of delivery3M™ PELTOR™ WS™ LiteCom Pro III Ex headset.
Battery ACK082
Power supply FR08
Cable AL2AH (for ACK082)
Hygiene kit HY83
Documentation

Classifications

SystemClasscode
ECLASS 13.019069090
ECLASS 12.019069090
ECLASS 11.019069090
ECLASS 10.0.119069290
ECLASS 9.019069290
ECLASS 8.019069290
ECLASS 5.119069290
ETIM 9.0EC002696
ETIM 8.0EC002696
ETIM 7.0EC002696
ETIM 6.0EC002696
ETIM 5.0EC002696
UNSPSC 12.143191507
Product category / 产品类的

Details: LiteCom PRO III Ex Neckband 403-470 MHz

Approvals: LiteCom PRO III Ex Neckband 403-470 MHz

选择语言:
Declaration of Conformity证书号码语言文件类型文件大小
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-5242ALLPDF338 KB

配套产品: LiteCom PRO III Ex Neckband 403-470 MHz

Accessories
Boom arm microphone with dynamic microphone capsule, waterproof for 3M™ PELTOR™ LiteCom Pro III Ex headsetpa
Rechargeable lithium-ion battery for 3M™ PELTOR™ LiteCom Pro III Ex headsetpa
Battery charging cable for ACK081 battery packpa
External PTT for WS™ LiteCom Pro III Ex Headset, ATEXpa
Power plug with USB charging port for 3M™ PELTOR™ LiteCom Pro III Ex headsetpa
Ear cushions for 3M™ PELTOR™ LiteCom Pro III Ex headsetpa
Sweat absorber for 3M™ PELTOR™ LiteCom Pro III Ex headsetpa
Microphone protection band for 3M™ PELTOR™ LiteCom Pro III Ex headsetpa
Windscreen for 3M™ PELTOR™ LiteCom Pro III Ex headsetpa
Windscreen for 3M™ PELTOR™ LiteCom Pro III Ex headsetpa
Windscreen for 3M™ PELTOR™ LiteCom Pro III Ex headsetpa