Power Hub Motherboard MBHC-FB-4R.HSC*

FieldConnex® Fieldbus

4 segments, redundant, individual modules per segment
Customizable cable connections to any PLC and PCS hosts
High-power trunk: Live work on devices in any hazardous area
Best quality, smallest size and lowest heat dissipation
For FOUNDATION Fieldbus and PROFIBUS PA
Optional advanced diagnostics
Passive impedance for high reliability
Supports Ex ic voltage limitation
Installation in Zone 2/Div. 2
Spring terminals or screw terminals selectable

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Související produkty
Zeptejte se odborníků

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Stáhněte si kompletní katalogový list ve formátu PDF:

Výňatek z katalogového listu: Technická data MBHC-FB-4R.HSC*

Popis produktu
Power hub motherboard with host system connectors

General specifications
Design / Mounting		Motherboard based
Installation in hazardous area		Zone 2 / Div. 2
Supply
Connection		redundant
Rated voltage		19.2 ... 35 V SELV/PELV
Rated current		12 A
Power dissipation		typ. 0.4 W per segment
Fieldbus connection
Number of segments		4 Redundant Power Supply
Host-side		system specific cable connection
Terminating resistor		100 Ω integrated
Indicators/operating means
Fault signal		VFC alarm 1 A, 50 V DC, normally closed
Galvanic isolation
Fieldbus segment/Fieldbus segment		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Fieldbus segment/Supply		functional insulation acc. to IEC 62103, rated insulation voltage 250 V_eff
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
Standard conformity
Electromagnetic compatibility		NE 21:2011
Degree of protection		IEC 60529
Fieldbus standard		IEC 61158-2
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		< 95 % non-condensing
Shock resistance		10 g , 11 ms
Vibration resistance		1 g , 10 ... 150 Hz
Pollution degree		max. 2, according to IEC 60664
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection type		screw terminal , pluggable spring terminal , pluggable
Core cross section		2.5 mm²
Housing material		Polycarbonate
Degree of protection		IP20
Mass		approx. 580 g
Mounting		DIN mounting rail
Data for application in connection with hazardous areas
Certificate		TÜV 10 ATEX 555761X
	Marking	II 3G Ex ec IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
FM approval		CoC 3024816, CoC 3024816C
	Approved for	Class I, Division 2, Groups A, B, C, D, T4 / Class I, Zone 2, AEx/Ex nA IIC T4
IECEx approval		IECEx TUN 13.0037X
	Approved for	Ex ec IIC T4 Gc
Certificates and approvals
Marine approval		DNV A-14038
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27242603
ECLASS 12.0	27242603
ECLASS 11.0	27242603
ECLASS 10.0.1	27242603
ECLASS 9.0	27242603
ECLASS 8.0	27242603
ECLASS 5.1	27242603
ETIM 9.0	EC001598
ETIM 8.0	EC001598
ETIM 7.0	EC001598
ETIM 6.0	EC001598
ETIM 5.0	EC001604
UNSPSC 12.1	39121008

Details: MBHC-FB-4R.HSC*

Informative Literature: MBHC-FB-4R.HSC*

Literature	Jazyk	Typ souboru	Velikost souboru
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron	ENG	PDF	361 KB
Application Report - Digital Communication in Steel-Plate Manufacturing	ENG	PDF	470 KB
Application Report - Fieldbus Power Supply Compatible with Process Industry Applications	ENG	PDF	229 KB

Product Documentation: MBHC-FB-4R.HSC*

Safety and Security Documentation	Jazyk	Typ souboru	Velikost souboru
Návod k poużití	CZE	PDF	233 KB
Manuals
Manual MBHC-FB-4.HSC*	ENG	PDF	1498 KB

Design / Simulation: MBHC-FB-4R.HSC*

CAD	Jazyk	Typ souboru	Velikost souboru
CAD 2-D / CAD 2-D	ALL	ZIP	1964 KB

Approvals: MBHC-FB-4R.HSC*

Certificates	Číslo certifikátu	Jazyk	Typ souboru	Velikost souboru
Brasil TUV Rheinland Brazil	TÜV 14.0356 X	ALL	PDF	1118 KB
Canada FM	FM 19 CA 0011X	ALL	PDF	356 KB
China SITIIAS CCC Ex Certificate	2020322303003509 (Singapore)	ALL	PDF	1406 KB
DNV Marine	TAA0000272	ALL	PDF	100 KB
Europe TUV Nord ATEX Category 3 G	TÜV 10 ATEX 555761X	ALL	PDF	2296 KB
TUV Nord IECEx ec Certificate of Conformity	IECEx TUN 13.0037X	ALL	LINK	---
USA FM	FM 19 US 0015X	ALL	PDF	213 KB
Worldwide Fieldbus Foundation	PS066300	ALL	PDF	31 KB
Worldwide Fieldbus Foundation	PS066200	ALL	PDF	31 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)	TDOC-2261ECZE	CZE	PDF	1142 KB

Související produkty: MBHC-FB-4R.HSC*

Matching System Components

	HCD2-FBPS-1.500 Fieldbus Power Supply
	FieldConnex® Fieldbus, Fieldbus power supply, module for fieldbus power hub, Output: 28 ... 30 V/500 mA, High-power trunk for high device count and long cable lengths, With galvanic isolation, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canadapa

	MBHC-FB-4.GT* Power Hub Motherboard
	FieldConnex® Fieldbus, Power hub motherboard for gateway and power supply modules, 4 segments, simplex, individual modules per segment, For PROFIBUS PA, For gateway and power supply modules, High-power trunk: Live work on devices in any hazardous area, Optional advanced diagnostics, IECEx approval, International, Europe, USA, Canadapa

Matching System Components

	HD2-DM-A Advanced Diagnostic Module
	FieldConnex® Fieldbus, Advanced diagnostic module, plug-in module for the fieldbus power hub, Comprehensive diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canadapa

	HD2-DM-B Advanced Diagnostic Module
	FieldConnex® Fieldbus, Advanced diagnostic module, base module for fieldbus power hub physical layer diagnostics, Basic monitoring for power supply output and health, Plug-in Module for the FieldConnex Power Hub, Plug and play - no engineering required, For online monitoring, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canadapa

	HCD2-FBPS-1.23.500 Fieldbus Power Supply
	FieldConnex® Fieldbus, Fieldbus power supply, module for fieldbus power hub, Output: 21 ... 23 V/500 mA, Voltage limitation for Entity ic and Ex nL, With galvanic isolation, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: Zone 2 - high-power trunk, Instrument location / spur protection: Zone 2 - all relevant types of protection, Function: Fieldbus Power Supplypa

	HD2-DM-A.RO Advanced Diagnostic Module
	FieldConnex® Fieldbus, Advanced diagnostic module with relay output for fieldbus power hub physical layer diagnostics, Diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Plug and play - no engineering required, For online monitoring, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canadapa

	MB-FB-GTR1* Power Hub Motherboard
	FieldConnex® Fieldbus, Power hub motherboard for protocol gateways modules, For 2 gateway modules, For PROFIBUS PA, Redundant configuration, Installation in Zone 2/Class I, Div. 2, Spring terminals or screw terminals selectable, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

Všeobecné poznámky týkající se produktů společnosti Pepperl+Fuchs

Rychlý odkaz

Ethernet-APL pro zpracovatelský průmysl

Technologie Ethernet-APL umožňuje nepřetržitou komunikaci napříč všemi hierarchickými úrovněmi. Další informace o průkopnické technologii…

Informační služba RSS pro aktualizace systém PANOS

Buďte informováni o vydání nové aktualizace softwaruPANOS, operačního systému pro přepínače Ethernet-APL: Díky našemu informačnímu kanálu RSS obdržíte ihned po vydání aktualizace e-mailové upozornění do své e-mailové schránky.

FieldConnex® – Sběrnice snadněji

Od rozhodování a plánování přes instalaci a uvedení do proozu až po provoz a údržbu: Objevte, jak co nejlépe využít svou sběrnicovou infrastrukturu…

Technologie

Provozní sběrnice v bezpečných prostředích i prostředích s nebezpečím výbuchu

Pepperl+Fuchs s.r.o.
Pod Vodárenskou věží 4
18208 Praha 8
Czech Republic
info@cz.pepperl-fuchs.com
phone +420 225 989 180

Pepperl+Fuchs je přední vývojář a výrobce průmyslových senzorů a komponentů pro světový trh automatizace. Neustálé inovace, trvalé kvalitní a stálý růst zaručuje mnoho úspěchů přes více než 70 let. Pepperl+Fuchs zaměstnává 6300 lidí po celém světě a má výrobní závody v Německu, USA, Singapuru, Maďarsku, Indonésii a Vietnamu, které podléhají ISO 9001.