Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Stáhněte si kompletní katalogový list ve formátu PDF:
Popis produktu |
---|
Universal distance sensor, measurement to object, 6 m detection range, red laser light, laser class 2, 2 x PNP outputs, analog output, M12 plug |
General specifications | ||
---|---|---|
Measurement range | 0.2 ... 6 m | |
Reference target | Kodak white (90%) | |
Light source | laser diode | |
Light type | modulated visible red light modulated infrared light |
|
Laser nominal ratings | ||
Note | VISIBLE AND INVISIBLE LASER RADIATION , DO NOT STARE INTO BEAM | |
Laser class | Measuring laser: 1 Alignment laser: 2 |
|
Wave length | Measuring laser: 905 nm Alignment laser: 650 nm |
|
Beam divergence | Measuring laser: 2 mrad Alignment laser: 1 mrad | |
Pulse length | Measuring laser: 6 ns Alignment laser: 0.25 µs | |
Repetition rate | Measuring laser: 40 kHz Alignment laser: 1 kHz | |
Maximum optical power output | Measuring laser: 1.8 W Alignment laser: 3 mW | |
Measuring method | Time of flight measurement | |
Diameter of the light spot | 4 mm x 12 mm at a distance of 6 m | |
Ambient light limit | 5000 Lux | |
Temperature influence | typ. ≤ 1.2 mm/K | |
Indicators/operating means | ||
Operation indicator | LED green | |
Function indicator | LED yellow: switching state (2x) , LED orange : Operating mode | |
Control elements | Control panel : Adjuster for switch point , Operating mode , Analog output ( S - Set , T - Toggle ) | |
Parameterization indicator | LED red (4x) | |
Electrical specifications | ||
Operating voltage | 18 ... 30 V DC , class 2 | |
Ripple | 10 % within the supply tolerance | |
No-load supply current | ≤ 125 mA / 24 V DC | |
Time delay before availability | ≤ 300 ms | |
Output | ||
Switching type | light/dark on, switchable | |
Signal output | 2 PNP, short-circuit protected | |
Switching current | max. 100 mA | |
Measurement output | 1 analog output 4 ... 20 mA, short-circuit/overload protected , Rmax = 500 Ohm | |
Voltage drop | ≤ 2.4 V | |
Deviation of the characteristic curve | typ. ≤ ± 40 mm | |
Switching frequency | Fast: 40 Hz / Slow: 16 Hz | |
Response time | Fast: 13 ms / Slow: 80 ms | |
Repeat accuracy | Fast: ≤ ± 15 mm / Slow: ≤ ± 10 mm | |
Compliance with standards and directives | ||
Directive conformity | ||
EMC Directive 2004/108/EC | EN 60947-5-2 | |
Standard conformity | ||
Laser class | IEC 60825-1:2007 | |
Approvals and certificates | ||
Approvals | CE, cULus | |
Ambient conditions | ||
Ambient temperature | -20 ... 50 °C (-4 ... 122 °F) | |
Storage temperature | -40 ... 80 °C (-40 ... 176 °F) | |
Mechanical specifications | ||
Degree of protection | IP67 | |
Connection | 5-pin, M12 x 1 connector | |
Material | ||
Housing | ABS | |
Optical face | PMMA | |
Mass | 200 g | |
Dimensions | ||
Height | 93 mm | |
Width | 95 mm | |
Depth | 42 mm |
System | Classcode |
---|---|
ECLASS 13.0 | 27270916 |
ECLASS 12.0 | 27270916 |
ECLASS 11.0 | 27270801 |
ECLASS 10.0.1 | 27270801 |
ECLASS 9.0 | 27270801 |
ECLASS 8.0 | 27270801 |
ECLASS 5.1 | 27270801 |
ETIM 9.0 | EC001825 |
ETIM 8.0 | EC001825 |
ETIM 7.0 | EC001825 |
ETIM 6.0 | EC001825 |
ETIM 5.0 | EC001825 |
UNSPSC 12.1 | 41111613 |
Brief Instructions | Jazyk | Typ souboru | Velikost souboru |
---|---|---|---|
Instruction leaflet / Beipackzettel | ALL | 1041 KB |
CAD | Jazyk | Typ souboru | Velikost souboru |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 1524 KB |
Certificates | Číslo certifikátu | Jazyk | Typ souboru | Velikost souboru |
---|---|---|---|---|
Canada USA UL Ordinary Location | E87056 | ALL | LINK | --- |
EU Pepperl+Fuchs | PF08CERT1244 | ALL | 503 KB |