Pressure Transmitter LHC-M51

Device for absolute pressure and gauge pressure measurement in gases, steams or liquids
Large selection of process connections: universal use
Temperature range up to 130 °C (266 °F)
Pressure range up to 400 bar (6000 psi)
Easy commissioning without the need for an operating tool
Configurable by PACTware

Technical Data
Product Documentation
Design / Simulation
Approvals
Software
Produits associés
Vous sollicitez un expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Téléchargez ici la fiche technique complète en PDF:

Caractéristiques techniques LHC-M51

General specifications
Construction type		sensor: silicium sensor metall diaphragm
Series		LHC-M51
Supply
Rated voltage		versions for safe area: 11.5 ... 45 V DC, 2-wire 11.5 ... 35 V DC, HART, 2-wire 9 ... 32 V DC, PROFIBUS PA version for hazardous area see safety information (SI)
Input
Measured variable		absolute or relative pressure
Measuring range		0.4 ... 400 bar max. turn down: 100:1
Output
Output signal		4 ... 20 mA , analog , 2-wire 4 ... 20 mA with superimposed digital communication protocol HART 6.0, 2-wire digital communication signal PROFIBUS PA (Profile 3.02)
Communication		4 ... 20 mA HART (standard) PROFIBUS PA (option)
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2006 , EN 61326-2-3:2006 , EN 61326-2-5:2006
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Degree of protection		IEC 60529:2001
Measurement accuracy
Accuracy		reference accuracy: ±0.15 % (standard), ±0.075 % (platinum) The reference accuracy comprises the non-linearity according to limit point setting, hysteresis and non-reproducibility acc. to IEC 60770. The data refer to the calibrated span.
Long-term drift		up to ±0.1 % of upper range limit (URL)/year
Operating conditions
Process conditions
	Process temperature	-40 ... 125 °C (-40 ... 257 °F) hygienic versions: -40 ... 130 °C (-40 ... 266 °F), 150 °C/1h (302 °F/1h)
Ambient conditions
Ambient temperature		-40 ... 85 °C (-40 ... 185 °F) with display : -20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protection		IP66, NEMA 4X IP68, NEMA 6P (24 hours in water 1.83 m (6 ft) deep) IP69K (with separate housing and FEP cable)
Connection		gland M20 thread M20, G1/2, NPT1/2 device plug M12 HAN7D Harting connector, angled valve connector acc. ISO 4400, cable 5 m
Material		materials in contact with process : 316L, Alloy C, rhodium>gold housing: - die-cast aluminum with protective powder-coating on polyester base, housing F31 - stainless steel AISI 316L (1.4404), housing F15 measuring cell seal: no, welded measuring cell
Process connection		threads ISO 228: G1/2, G1, G1-1/2, G2 threads ANSI: NPT1/2, NPT1, NPT1-1/2, NPT2 hygienic process connections: Clamp, Varivent, DRD, DIN 11851, DIN 11864, NEUMO, APV, uni adapter flanges: EN 1092-1: DN 25 ... DN 80, ANSI 16.5: 1 ... 4 inch, JIS B2220
Data for application in connection with hazardous areas
EU-type examination certificate		see instruction manuals (SI)
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-31:2009
International approvals
FM approval		see instruction manuals (SI)
CSA approval		see instruction manuals (SI)
IECEx approval		see instruction manuals (SI)
Certificates and approvals
Drinking water approval		NSF61 approval
General information
Supplementary documentation		technical information (TI) manuals, brief instructions (BA, KA) instruction manuals (SI) control drawings (ZD) approval (ZE)
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Accessories
Designation		see technical information (TI)

Classifications

System	Classcode
ECLASS 13.0	27200516
ECLASS 12.0	27200516
ECLASS 11.0	27200516
ECLASS 10.0.1	27200516
ECLASS 9.0	27200516
ECLASS 8.0	27200516
ECLASS 5.1	27200516
ETIM 9.0	EC001447
ETIM 8.0	EC001447
ETIM 7.0	EC001447
ETIM 6.0	EC001447
ETIM 5.0	EC001447
UNSPSC 12.1	41111950

Details: LHC-M51

Product Documentation: LHC-M51

Product information	Langue	Type de fichier	Taille
TI00436O, Technical Information LHC, PPC	ENG	PDF	8119 KB
Brief Instructions
KA1030O, brief instructions LHC-M51, PPC-M51 4 mA ... 20 mA HART	ENG	PDF	1633 KB
KA1031O, brief instructions LHC-M51, PPC-M51 PROFIBUS PA	ENG	PDF	5215 KB
KA1036O, brief instructions LHC-M51, PPC-M51 4 mA ... 20 mA Analog	ENG	PDF	802 KB
Safety and Security Documentation
SI00466O, Instruction manual LHC-M51, PPC-M51	FRA	PDF	1246 KB
SI00469O, Instruction manual LHC-M51, PPC-M51	FRA	PDF	674 KB
SI00489O, Instruction manual LHC-M51, PPC-M51	FRA	PDF	834 KB
Safety Manual	FRA	PDF	1293 KB
Safety Manual	FRA	PDF	1269 KB
Manuals
BA382O, Manual LHC-M51, PPC-M51 4 mA ... 20 mA HART	ENG	PDF	2974 KB
BA383O, Manual LHC-M51, PPC-M51 PROFIBUS PA	ENG	PDF	2820 KB
BA385O, Manual LHC-M51, PPC-M51 4 mA ... 20 mA Analog	ENG	PDF	1512 KB

Design / Simulation: LHC-M51

CAD	Langue	Type de fichier	Taille
CAD 3-D / CAD 3-D	ALL	STP	1592 KB
CAD 3-D additional / CAD 3-D additional	ALL	STP	1312 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: LHC-M51

Certificates	Identification	Langue	Type de fichier	Taille
Canada, USA CSA	CSA 14.70009779	ALL	PDF	100 KB
DEKRA Ex ia Ex ta Ex ic IECEx Certificate of Conformity	IECEx DEK 13.0056	ALL	LINK	---
Europe DEKRA ATEX Category 1/2 D ATEX Category 2 G ATEX Category 1/2 G	DEKRA 13 ATEX 0142	ALL	PDF	306 KB
Europe Pepperl+Fuchs ATEX Category 3 G Certificate	PF 13 CERT 2814 X	ALL	PDF	193 KB
Europe Pepperl+Fuchs ATEX Category 3 G Certificate	PF 13 CERT 2815	ALL	PDF	225 KB
Control Drawings
Control drawing CSA / Control drawing CSA		ALL	PDF	112 KB
Control drawing CSA / Control drawing CSA		ALL	PDF	100 KB
SI00563O, Instruction manual FM LHC-M51, PPC-M51 4 ... 20 mA HART		ENG	PDF	156 KB
SI00564O, Instruction manual FM LHC-M51, PPC-M51 PROFIBUS PA		ENG	PDF	169 KB
Control drawing CSA / Control drawing CSA		ALL	PDF	108 KB
Control drawing CSA / Control drawing CSA		ALL	PDF	99 KB
SI00556O, Instruction manual CSA LHC-M51, PPC-M51 4 ... 20 mA HART		ENG	PDF	154 KB
SI00558O, Instruction manual CSA LHC-M51, PPC-M51 PROFIBUS PA		ENG	PDF	164 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0213E	ALL	PDF	257 KB
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0251B	ALL	PDF	107 KB
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0249B	ALL	PDF	120 KB
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0247B	ALL	PDF	121 KB
Contamination Declaration
Contamination declaration / Kontaminationserklärung		ALL	PDF	137 KB

Software: LHC-M51

Device Description Files/Drivers	Parution	Type de fichier	Taille
GSD / GSD	PF__0E3A.GSD	ZIP	11 KB

Produits associés : LHC-M51

Accessories

	PACTware 5.0 FDT Framework
	Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa

	DTM Level Control DTM collection
	Device DTM, For level devices, Frame application, like e. g. PACTware, must be installed separatelypa

Remarques générales sur les informations produit de Pepperl+Fuchs

Accès direct

Centre de sécurité fonctionnelle de Pepperl+Fuchs

Visitez le Centre de sécurité fonctionnelle

Plusieurs centaines de produits ayant fait l'objet d'une évaluation SIL/PL, des outils gratuits et des brochures au même endroit : le « Centre de sécurité fonctionnelle » est votre point de départ lorsque vous devez mettre en œuvre des fonctions de sécurité.

Pepperl+Fuchs Eurl
12 Avenue des Tropiques
91955 Courtaboeuf Cedex
France
info@fr.pepperl-fuchs.com
phone +33 1 60921300

Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.