Ex pxb motor purge and pressurization control unit 6100-MP-EX-*
- Certified for ATEX and IECEx Zone 1
- Maximum flow rate of 14,000 l/min
- Intrinsically safe user interface for programming and monitoring the system
- Control Unit monitors system operation and controls enclosure power
- Auxiliary contact outputs for alarm or control
- Multiple temperature inputs for monitoring and control
- Automatic pressure compensation for excess leakage from motor
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok 6100-MP-EX-*
| Termék leírása |
|---|
| 6100 series Ex pxb motor purge and pressurization system control unit |
| General specifications | ||
|---|---|---|
| Operating mode | manual, semi-automatic, or fully automatic - programmable | |
| Series | 6100 Series | |
| System | Ex pxb Purge | |
| Number of volume exchanges | 4 to 19 | |
| Hazardous environment | gas | |
| Supply | ||
| Rated voltage | 100 ... 250 V AC, 50 ... 60 Hz / 0.2 A 20 ... 30 V DC / 0.6 A |
|
| Electrical specifications | ||
| Connection | ||
| Power | Ex e terminal blocks | |
| Connection | 6000-ISB DIN mounted terminal | |
| Input | ||
| Input type | IS 1: Dedicated for 6000-TEMP-01 (optional) IS 2: Dedicated for 6100-MP-LPP Input 1: SRM, discrete input, Intrinsically Safe Input 2: SRM, discrete input, Intrinsically Safe Input 3: Dedicated for EPV-6100-MP, Flow Signal Input 4: Dedicated high pressure switch, Max Pressure Signal (optional) |
|
| Output | ||
| Output I | AUX 1 | |
| Output type | Dry contacts, SPDT | |
| Inrush current | 5 A | |
| Contact loading | 2 A at 240 V AC resistive load 2 A at 24 V DC |
|
| Output II | AUX 2 | |
| Output type | Dry contacts, SPDT | |
| Inrush current | 5 A | |
| Contact loading | 2 A at 240 V AC resistive load 2 A at 24 V DC |
|
| Output III | enclosure 1 and 2 | |
| Output type | Dry contacts (2) SPST, NO | |
| Inrush current | 72 A | |
| Contact loading | 8 A at 240 V AC / 120 V AC resistive load 8 A at 24 V DC |
|
| Indicators/settings | ||
| LED indication | Safe pressure: Blue - safe pressure is achieved Enclosure power: Green - power on; Red - power off Rapid exchange: Blue - purging is running System bypass: Yellow - bypass is activated Alarm fault: Red (blinking) - any alarm input detected; Red (solid) - fault |
|
| Pneumatic parameters | ||
| Protective gas supply | regulated and filtered air or inert gas | |
| Pressure requirement | regulated side: 1.4 ... 8.3 bar [20 ... 120 psig) unregulated side: 4.1 ... 8.3 bar [65 ... 120 psig) |
|
| Safe pressure | 0.62 mbar [0.25 in wc / 6.4 mm wc] minimum for 6100-MP-LPP-* | |
| Purge flow and enclosure pressure rate | 2000 l/m ... 14000 l/m see EPV-6100 datasheet for flow rate steps |
|
| Valve flows | pressurization valve: manual gate valve purging valve: pilot drive angle seat valve pilot valve: intrinsically safe solenoid valve |
|
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN 50581:2012 | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 60 °C (32 ... 140 °F) Standard version -20 ... 60 °C (-4 ... 140 °F) Low temp version, no regulator version |
|
| Storage temperature | 0 ... 80 °C (32 ... 176 °F) Standard version -20 ... 80 °C (-4 ... 176 °F) Low temp version, no regulator version |
|
| Relative humidity | 5 ... 95 %, noncondensing | |
| Vibration resistance | 1 g , 10 ... 150 Hz , all axes | |
| Impact resistance | 15 g, 11 ms, all axes | |
| Mechanical specifications | ||
| Connection type | Terminals | |
| Core cross section | see manual | |
| Degree of protection | IP66 | |
| Cable entry | 3 x M16 holes, plugs that are included are not hazardous-location rated 4 x M20 holes, plugs that are included are not hazardous-location rated |
|
| Material | inlet and outlet: 1¼ inch NPTF, 316 stainless steel internal piping: copper bulkhead fittings: 316 stainless steel (no regulator model) gate valve: bronze, Grafoil seals purging valve: 316 stainless steel, PTFE seals solenoid valve: brass housing: 316L stainless steel regulator: zinc (standard temp); aluminum (low temp); N/A (no regulator) filter (pneumatic): aluminum tubing (pneumatic): nylon fittings (pneumatic): nickel-plated brass |
|
| Mass | 47.2 kg (104 lb) | |
| Dimensions | 216 mm x 508 mm x 770 mm (8.5 in x 20 in x 30.3 in) | |
| Height | 762 mm | |
| Width | 558 mm | |
| Depth | 213 mm | |
| Data for application in connection with hazardous areas | ||
| Certificate | CML 19 ATEX 1425X | |
| Marking |  II 2G Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018 EN 60079-1:2014 EN 60079-2:2014 EN 60079-7:2015 EN 60079-11:2012 |
|
| International approvals | ||
| IECEx approval | IECEx CML 19.0156X Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb |
|
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Supplemental Standards : EN 61010-1:2010 |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180591 |
| ECLASS 12.0 | 27180591 |
| ECLASS 11.0 | 27180591 |
| ECLASS 10.0.1 | 27293101 |
| ECLASS 9.0 | 27293101 |
| ECLASS 8.0 | 27293101 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121303 |
Details: 6100-MP-EX-*
Function
The Bebco EPS® 6100 series Ex pxb, Zone 1 motor purge and pressurization system consists of the following components in an IP66 housing: a control unit and user interface, intrinsically safe and power terminals, manual pressurization valve, and electro-pneumatic valve for automatic purging and leakage compensation.
The configurable control unit features temperature and pressure compensation, an extra output for control or alarm, two selectable intrinsically safe inputs for various actions, and up to three temperature sensor inputs that can monitor various points with a motor housing. The intrinsically safe user interface can also be mounted in a separate enclosure near operating personnel for quick access and easy system monitoring. The 6100 purge and pressurization system can also be used to purge and protect large enclosures that require a large flow rate.
Informative Literature: 6100-MP-EX-*
| We are sorry, there are no documents for your language selection. Please select another language. |
Product Documentation: 6100-MP-EX-*
| Product information | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Basic Explosion Protection Compendium - Type of Protection "Purge and Pressurization" | ENG | 3860 KB | |
| Safety and Security Documentation | |||
| Használati útmutató | HUN | 166 KB | |
| Manuals | |||
| Manual | ENG | 5218 KB | |
Approvals: 6100-MP-EX-*
| Certificates | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|---|
| Brasil Certificate of Compliance | DNV 24.0062 X | ALL | 421 KB | |
| Europe CML ATEX Certificate II 2 G | CML 19ATEX1425X | ALL | 118 KB | |
| IECEx Certificate of Conformity | IECEx CML 19.0156X | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F) | DOC-B0D7C | ALL | 113 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-B0F6 | ALL | 160 KB | |
Kapcsolódó termékek: 6100-MP-EX-*
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
+36 88 545 902
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.