光電センサ

Not available for purchase

This product has been replaced.Go to replacement product OBG5000-R101-2P1-IO-V31

Not available for purchase

Add to Watch List

Not available for purchase

Retroreflective sensor ML6-54-F/25/95/136

Precision sensor for standard applications
Miniature design with very robust and versatile mounting options
Objects can be reliably detected down to 0 mm: no blind zone
Small, sharp light spot
Rear mounting option for easy mounting without mounting bracket
Tamper-proof version with no adjustments

Technical Data
Product Documentation
Design / Simulation
Approvals
関連製品
お問い合わせ

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):

技術データ ML6-54-F/25/95/136

型番
Retroreflective sensor for standard applications, miniature design, polarization filter, 6 m detection range, red light, light on, 2 push-pull outputs, M8 plug

General specifications
Effective detection range		0 ... 5 m
Reflector distance		0 ... 5 m
Threshold detection range		6 m
Reference target		H85-2 reflector
Light source		LED
Light type		modulated visible red light , 660 nm
Polarization filter		yes
Angle deviation		max. ± 1°
Diameter of the light spot		approx. 40 mm at detection range 1 m
Opening angle		1.7 °
Ambient light limit
	Continuous light	40000 Lux
	Modulated light	5000 Lux
Functional safety related parameters
MTTF_d		980 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Function indicator		LED yellow: switching state ; Operating reserve
Electrical specifications
Operating voltage		10 ... 30 V DC
Ripple		max. 10 %
No-load supply current		< 20 mA at 24 V DC
Output
Switching type		light/dark on, programmable
Signal output		2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA
Voltage drop		≤ 2.5 V DC
Switching frequency		1 kHz
Response time		500 µs
Conformity
Product standard		EN 60947-5-2
Compliance with standards and directives
Standard conformity
	Shock and impact resistance	IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
	Vibration resistance	IEC / EN 60068-2-6. Sinus. 10 -2000 Hz, 10 g in each X, Y and Z directions
Approvals and certificates
UL approval		cULus Listed
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-20 ... 75 °C (-4 ... 167 °F)
Mechanical specifications
Degree of protection		IP67 / IP69K
Connection		M8 x 1 connector, 4-pin
Material
	Housing	ABS
	Optical face	PMMA
Mass		10 g
Dimensions
	Height	31.4 mm
	Width	13.9 mm
	Depth	18 mm

Classifications

System	Classcode
ECLASS 13.0	27270902
ECLASS 12.0	27270902
ECLASS 11.0	27270902
ECLASS 10.0.1	27270902
ECLASS 9.0	27270902
ECLASS 8.0	27270902
ECLASS 5.1	27270902
ETIM 9.0	EC002717
ETIM 8.0	EC002717
ETIM 7.0	EC002717
ETIM 6.0	EC002717
ETIM 5.0	EC002717
UNSPSC 12.1	39121528

Details: ML6-54-F/25/95/136

Product Documentation: ML6-54-F/25/95/136

Brief Instructions	言語	ファイルタイプ	ファイルサイズ
Instruction leaflet / Beipackzettel	ALL	PDF	509 KB

Design / Simulation: ML6-54-F/25/95/136

CAD	言語	ファイルタイプ	ファイルサイズ
CAD 3-D / CAD 3-D	ALL	STP	461 KB

Approvals: ML6-54-F/25/95/136

Certificates	認証番号	言語	ファイルタイプ	ファイルサイズ
Canada USA UL Ordinary Location	UL-US-L87056-11-41705002-0 / UL-CA-L87056-31-41705002-0	ALL	PDF	493 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0708D	ALL	PDF	227 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-6924	ALL	PDF	224 KB

関連製品: ML6-54-F/25/95/136

Accessories

	V31-GM-5M-PUR Female cordset
	Female cordset single-ended M8 straight A-coded, 4-pin, PUR cable greyfa

	V31-WM-5M-PUR Female cordset
	Female cordset single-ended M8 angled A-coded, 4-pin, PUR cable greyfa

	REF-H85-2 Reflector
	Reflector, rectangular 84.5 mm x 84.5 mm, mounting holesfa

	REF-C110-2 Reflector
	Reflector, round ø 84 mm, central mounting holefa

	REF-H60 Reflector
	Reflector, rectangular 40.3 mm x 59.9 mm, mounting holesfa

	REF-VR10 Reflector
	Reflector, rectangular 60 mm x 19 mm, mounting holesfa

	OMH-4.1 Mounting aid
	Mounting Clampfa

	OMH-ML6-Z Mounting aid
	Mounting bracket fa

	OMH-ML6-U Mounting aid
	Mounting bracket fa

	OMH-ML6 Mounting aid
	Mounting bracket fa

	OFR-100/100 Reflective tape
	Reflective tape 100 mm x 100 mmfa

	REF-A17 Reflector
	Reflector, round ø 20.5 mm, self-adhesivefa

General Notes Relating to Pepperl+Fuchs Product Information

R10x and R20x series photoelectric sensors

R10x、R20xシリーズ

1つの製品で光電センサの機能と革新的なテクノロジーのソリューションを実現しました。新製品R10x、R20xシリーズをご覧ください…

ML100 Series—The Problem Solver for Special Applications

Whether glass, solar wafers or printed circuit boards: The photoelectric sensors of the ML100 series are precisely tailored to meet the requirements of various complex detection tasks. Learn more about the portfolio and find the ideal sensor for your application ...