Serviceline Industrial Sensors
Serviceline Explosion Protection

Type Z purge and pressurization system 1011

1011
  • NFPA 70, NFPA 496, ISA 12.4 standards
  • Optional alarm output indicates air lock failure
  • Type Z system certified for Class I and Class II, Division 2 to nonhazardous area
  • Class I enclosure volume up to 2 ft3
  • Class II enclosure volume up to 10 ft3

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

PDF 파일로 된 데이타 시트 다운로드:


데이타 시트 발췌: 기술 사양  1011

제품 설명
1011 Series purge and pressurization system
General specifications
Series1011
SystemType Y Purge , Type Z Purge
Hazardous environmentgas
Pneumatic parameters
Protective gas supplyinstrument grade air or inert gas
Pressure requirement5 - 120 psi
(With EPV-1 vent. Systems installed without vent must be equipped with redundant regulator set to 5 psi max.)
Safe pressureSetpoint: Class I: 0.25" (6.35 mm); Class II: 1.0" (25.4 mm)
Flow rate: 0.1 - 3.5 SCFH (2.8 - 99 l /hr)
Ambient conditions
Ambient temperature-29 ... 49 °C (-20.2 ... 120.2 °F)
Mechanical specifications
Connection typeSystem supply fitting: 1/4" tube fitting
Enclosure supply fitting: 1/4" tube fitting
Enclosure reference fitting: 1/4" tube fitting
MaterialRegulator body: brass, zinc w/enamel finish
Regulator handle: polycarbonate
Enclosure pressure gauge: alum w/ enamel finish
Tube fittings: 316 ss forged body
Tubing: 316 ss 1/4" .035 welded
System nameplate: silk screened Lexan®
Fastener hardware: alum. & stainless steel
Mounting plate & bracket: anodized aluminum
Enclosure warning nameplate: silk screened ss
Mass3.2 kg (7 lb)
International approvals
UL approval
cULusClass I, Division 2, Groups A, B, C, D
Class II, Division 2, Groups F, G

Classifications

SystemClasscode
ECLASS 13.027180508
ECLASS 12.027180508
ECLASS 11.027180508
ECLASS 10.0.127180508
ECLASS 9.027180508
ECLASS 8.027180508
ECLASS 5.140050501
ETIM 9.0EC000243
ETIM 8.0EC000243
ETIM 7.0EC000243
ETIM 6.0EC000243
ETIM 5.0EC000243
UNSPSC 12.139121301

Details: 1011

Product Documentation: 1011

Language Selection:
Brief Instructions언어파일 타입파일 크기
Installation and Operation Manual: Model 1011 Type Z Purge/Pressurization System (USA English)ENGPDF2137 KB

Approvals: 1011

Language Selection:
Certificates인증서 번호언어파일 타입파일 크기
Canada, USA FMCoC 3018335ALLPDF433 KB
UL Hazardous LocationE184741 (RFPW, RFPW7)ALLPDF193 KB

Get to know the smartest way to ensure hazardous location protection and configure your individual purge and pressurization system!