Multifunction Terminal MFT-*
- Suitable for fusing solenoids, alarm indicators, sounders etc, and diode decoupling of power supplies
- Simple OR gate for zone 1 mounting, visible separation for field devices, relay switches
- Bus termination
- Current limiting
- DIN rail mounting
- Maintenance without hot work permit
- Wires can be disconnected during operation once the module has been removed
(parts under voltage remain covered) - Up to SIL 3 acc. to IEC/EN 61508
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens MFT-*
| Productbeschrijving |
|---|
| Multifunction terminal, allows maintenance work to be carried out in hazardous areas without a hot work permit |
| General specifications | ||
|---|---|---|
| Function | The specific device function can be found in the ordering information section. | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| Electrical specifications | ||
| Resistor | 1 x 1 Ω ... 22 MΩ, 0.5 W 2 x 1 Ω ... 22 MΩ, 0.5 W |
|
| Diode | 1 x I max. 1 A 2 x I max. 0.5 A |
|
| Fuse | 0.032 ... 1.5 A 1.5 ... 6.3 A Pre-arcing time/current characteristic: time-lag T |
|
| Nominal voltage | max. 250 V AC max. 30 V DC | |
| Relay | ||
| Control | 24 V , approx. 5 ... 8.5 mA | |
| Contact loading | AC max. 250 V , max. 1 A DC max. 30 V , max. 1 A |
|
| Contact resistance | 0.1 Ω at 6 V, 1 A | |
| Switching operations NO contact | 3 x 104 | |
| Switching operations NC contact | 1 x 104 | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -55 ... 55 °C (-67 ... 131 °F) (Im = 1.5 ... 6.3 A) -55 ... 70 °C (-67 ... 158 °F) (Im = 0.032 ... 1.5 A) The specific ambient temperature can be found in the ordering information section. |
|
| Mechanical specifications | ||
| Core cross section | 0.5 ... 2.5 mm2 | |
| Degree of protection | IP20 , IP30 when plug-in module is plugged in | |
| Mass | approx. 115 g , depending on model | |
| Dimensions | 93 x 17.5 x 79 mm (l x w x h) | |
| Height | 79 mm | |
| Width | 17.5 mm | |
| Length | 93 mm | |
| Tightening torque | 0.5 ... 1 Nm | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | PTB 07 ATEX 1004 U | |
| Marking |  II 2 G Ex d e IIC |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-1:2014 , EN 60079-7:2015+A1:2018 | |
| International approvals | ||
| IECEx approval | ||
| IECEx certificate | IECEx BKI 08.0008U | |
| IECEx marking | Ex d e IIC Gb | |
| Marine approval | ||
| DNV GL Marine | TAA0000034 | |
| General information | ||
| Ordering information | Customer-specific values are available in the E96 series. Minimum order quantity 50 pieces. |
|
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210192 |
| ECLASS 12.0 | 27210192 |
| ECLASS 11.0 | 27210192 |
| ECLASS 10.0.1 | 27210190 |
| ECLASS 9.0 | 27210190 |
| ECLASS 8.0 | 27210190 |
| ECLASS 5.1 | 27242692 |
| ETIM 9.0 | EC003015 |
| ETIM 8.0 | EC003015 |
| ETIM 7.0 | EC003015 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC001485 |
| UNSPSC 12.1 | 39121008 |
Details: MFT-*
Product Documentation: MFT-*
| Safety and Security Documentation | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Handleiding | HOL | 165 KB | |
| Functional Safety Manual | ENG | 1993 KB | |
| Manuals | |||
| Manual | ENG | 2766 KB | |
Design / Simulation: MFT-*
| CAD | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2318 KB |
| CAE | |||
| EPLAN macros MFT / EPLAN-Makros MFT | ALL | ZIP | 11723 KB |
Approvals: MFT-*
| Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| BKI IECEx Certificate of Conformity | IECEx BKI 08.0008U | ALL | LINK | --- |
| Brasil TUV Rheinland Brazil | TÜV 13.1133 U | ALL | 1220 KB | |
| Bureau Veritas (Maritime) Marine | 22449/C0 BV | ALL | 590 KB | |
| DNV Marine | TAA0000034 | ALL | 110 KB | |
| Europe PTB ATEX Category 2 G | PTB 07 ATEX 1004U | ALL | 1206 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0746D | ALL | 358 KB | |
Aanverwante producten: MFT-*
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs N.V.
Metropoolstraat 11
2900 Schoten / Anvers
BELGIË
BTW BE 0436.097.152, RPR Antwerpen, afd. Antw.
sales@be.pepperl-fuchs.com
+32 3 644 25 00
© 2024 Alle rechten voorbehouden.
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.