Solenoid Driver KCD2-SLD-Ex2.1545-Y1

2-channel isolated barrier
24 V DC supply (bus or loop powered)
Output 45 mA at 15 V DC
Line fault transparency (LFT)
Test pulse immunity
Housing width 12.5 mm

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
配套产品
咨询专家

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

下载PDF版完整参数表:

技术参数节选 KCD2-SLD-Ex2.1545-Y1

General specifications
Signal type		Digital Output
Supply
Connection		Power Rail or terminals 9+, 10- bus powered
Rated voltage		18 ... 30 V DC
Power dissipation		< 2 W
Power consumption		max. 3.5 W at 45 mA output current
Input
Connection side		control side
Connection		terminals 5+, 6-; 7+, 8- limited electrical values : max. 30 V , max. 5 A
Test pulse length		max. 2 ms from DO card
Signal level		loop powered 1-signal: 18 ... 30 V DC (current limited to ≥ 20 mA) 0-signal: 0 ... 5 V DC bus powered 1-signal: 15 ... 24 V DC (current limited at 5 mA) 0-signal: 0 ... 5 V DC
Rated current		loop powered 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 20 mA (minimum load current DO card) bus powered 1-signal: 5 mA
Inrush current		≤ 200 mA after 100 µs
Output
Connection side		field side
Connection		terminals 1+, 2-; 3+, 4-
Internal resistor		approx. 167 Ω
Current		≤ 45 mA
Voltage		≥ 15 V
Current limit		45 mA
Open loop voltage		min. 23.6 V
Load		nominal 0.05 ... 20 kΩ , valid range for line fault detection (LFD)
Energized/De-energized delay		≤ 20 ms / ≤ 20 ms
Line fault detection
	Test current	max. 350 µA , calculated by I_LFD = 3.3 V / (10 kΩ + R_Load)
Galvanic isolation
Input/Output		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Power supply/Output		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Indicators/settings
Display elements		LEDs
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2017 , EN IEC 61326-1:2021 (industrial locations) , EN IEC 61326-3-2:2018 For further information see system description.
Degree of protection		IEC 60529:2013
Protection against electrical shock		UL 61010-1:2019
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 105 g
Dimensions		12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		UL 23 ATEX 3027 X
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Output	Ex ia Refer to certificate for alternative parameters.
	Voltage	25.3 V
	Current	52 mA
	Power	850 mW (angular characteristic curve)
	Internal resistance	167 Ω
Supply
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Input
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Collective error message
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Certificate		UL 23 ATEX 3065 X
	Marking	II 3G Ex ec IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, rated insulation voltage 300 V_rms
	Output/power supply	safe electrical isolation acc. to IEC/EN 60079-11, rated insulation voltage 300 V_rms
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012
International approvals
UL approval		E106378
	Control drawing	116-0496 (cULus)
IECEx approval
	IECEx certificate	IECEx ULD 23.0016X
	IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210101
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008
Product category / 产品类的

Details: KCD2-SLD-Ex2.1545-Y1

Informative Literature: KCD2-SLD-Ex2.1545-Y1

Literature	语言	文件类型	文件大小
Application Guideline Solenoid Drivers	ENG	PDF	1982 KB
Product Overview - KCD* dual channel solenoid driver	ENG	PDF	507 KB

Product Documentation: KCD2-SLD-Ex2.1545-Y1

Safety and Security Documentation	语言	文件类型	文件大小
Instruction manual / Betriebsanleitung	CHS	PDF	333 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KCD2-SLD-Ex2.1545-Y1

CAD	语言	文件类型	文件大小
CAD 3-D / CAD 3-D	ALL	STP	3085 KB
CAE
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	2022 KB

Approvals: KCD2-SLD-Ex2.1545-Y1

Certificates	证书号码	语言	文件类型	文件大小
Canada UL cUL Hazardous Location UL E106378	CoC UL-CA-2414398-0 Rep Ref E106378-20240510	ALL	PDF	218 KB
Canada UL cUL Hazardous Location UL E106378	CoC UL-CA-2414399-0 Rep Ref E106378-20240510	ALL	PDF	218 KB
Europe UL ATEX Category (1) D ATEX Category (M1) ATEX Category (1) G	UL 23 ATEX 3027X	ALL	PDF	108 KB
Europe United Kingdom UL ATEX Category 3 G	UL 23 ATEX 3065X	ALL	PDF	83 KB
USA UL UL E106378 Hazardous Location UL	CoC UL-US-2417714-0 Rep Ref E106378-20240510	ALL	PDF	255 KB
USA UL UL E106378 Hazardous Location UL	CoC UL-US-2417718-0 Rep Ref E106378-20240510	ALL	PDF	218 KB
Worldwide UL IECEx Certificate of Conformity	IECEx ULD 23.0016X	ALL	LINK	---
Declaration of Conformity
EU-Declaration of conformity	TDOC-7688AENG	ENG	PDF	151 KB

配套产品: KCD2-SLD-Ex2.1545-Y1

Matching System Components

	KFD2-EB2 Power Feed Module
	Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indicationpa

	UPR-03 Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-M Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-S Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chainspa

	K-DUCT-BU Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

	K-DUCT-BU-UPR-03 Profile Rail
	Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa

Accessories

	KC-ST-5GN Terminal Block
	2-pin screw terminal, For KC modules of K-System, Packaging unit: 5 pieces greenpa

	KC-ST-5BU Terminal Block
	2-pin screw terminal, For KC modules of K-System, Packaging unit: 5 pieces bluepa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

General Notes Relating to Pepperl+Fuchs Product Information

快速链接

安全产品选型

通过各种选项进行选择，如安全完整性水平SIL，性能等级，功能及信号类型，并找到您正在寻找的经过 SIL/PL 评估的设备。

倍加福（北京）过程自动化控制设备有限公司
北京市经济技术开发区
科创十四街99号7号楼3101室
101111 Beijing
中国
pa-info@cn.pepperl-fuchs.com
phone +86 10 5901 7000

上海倍加福工业自动化贸易有限公司
上海市静安区市北工业园区江场三路
219号4楼
200436 上海
中国
fa-info@cn.pepperl-fuchs.com
phone +86 21 6630 3939

德国倍加福公司（P+F）是全球自动化行业中久负盛名的专业传感器公司。倍加福作为全球自动化领域的电子传感与零部件的生产主导者，凭借不断的创新，恒久的质量保证，稳健的发展，保证了迄今六十余年的辉煌成就。倍加福在全球范围内拥有6300名员工，位于德国，美国，新加坡，匈牙利，印度尼西亚和越南的生产基地几乎全部通过了ISO9001的质量认证。