General specifications |
Signal type | Analog input |
Functional safety related parameters |
Safety Integrity Level (SIL) | SIL 3 |
Supply |
Rated voltage | 0 ... 24 V DC , loop powered |
Power dissipation | < 0.2 W for Uin = 24 V, Iout = 20 mA |
Control circuit |
Connection | terminals 11+, 12-; 9+, 10-, 8- |
Voltage | 0 ... 24 V |
Current | 0 ... 20 mA |
Current limit | max. 35 mA , limited by control sided current source |
Field circuit |
Connection | terminals 1+, 2-; 4+, 5- |
Voltage | for 4 V ≤ Uin ≤ 24 V: Uout ≥ Uin - (0.41 x Iin in mA) - 0.5 |
Transmission range | voltage: 4 ... 20 V DC/0 ... 6 Vpp AC current: 1 ... 20 mA |
Transfer characteristics |
Deviation | |
| After calibration | ≤ 3.5 mA current loss at 20 mA load current |
| Influence of ambient temperature | ± 20 µA / K |
Rise time/fall time | ≤ 50 µs (load current ≥ 1 mA) |
Galvanic isolation |
Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
Indicators/settings |
Labeling | space for labeling at the front |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
Conformity |
Electromagnetic compatibility | NE 21:2006 |
Degree of protection | IEC 60529:2001 |
Protection against electrical shock | UL 61010-1 |
Ambient conditions |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications |
Degree of protection | IP20 |
Connection | screw terminals |
Mass | approx. 100 g |
Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1 |
| Height | 107 mm |
| Width | 20 mm |
| Depth | 115 mm |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas |
EU-type examination certificate | BAS 00 ATEX 7087 |
| Marking | II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I |
| Voltage | 28 V |
| Current | 93 mA |
| Power | 653 mW |
Supply | |
| Maximum safe voltage | 253 V (Attention! The rated voltage can be lower.) |
Certificate | TÜV 99 ATEX 1499 X |
| Marking | II 3G Ex nA II T4 |
Galvanic isolation | |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
Directive conformity | |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010 |
International approvals |
FM approval | |
| Control drawing | 116-0129 (cFMus) |
UL approval | E106378 |
| Control drawing | 116-0348 (cULus) |
IECEx approval | |
| IECEx certificate | IECEx BAS 08.0079 IECEx BAS 10.0007X |
| IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex nA IIC T4 Gc |
General information |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |