Serviceline Industrial Sensors
Serviceline Explosion Protection

DC/DC Converter PS1000-D2-24.10

PS1000-D2-24.10
  • 24 V DC input
  • Isolated output 24 V DC, 10 A, 240 W
  • Housing width 42 mm
  • Efficiency up to 94.2 %
  • Minimal inrush current surge
  • Reverse input polarity protection
  • 20 % output power reserves

请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。

下载PDF版完整参数表:


技术参数节选  PS1000-D2-24.10

Electrical specifications
Efficiency94.2 %
Power dissipation14.8 W
Input
Rated voltage24 V DC
Voltage range18 ... 35 V DC
Current10.5 mA at 24 V DC
Inrush current6 A peak at ambient temperature 25 °C (77 °F)
Output
Voltage range24 ... 28 V DC
factory setting: 24.1 V
Rated current10 A
Current12 ... 10.3 A at ambient temperature < 45 °C (113 °F)
10 ... 8.6 A at ambient temperature 60 °C (140 °F)
7.5 ... 6.4 A at ambient temperature 70 °C (158 °F)
linear power derating see technical information
Power240 W
Ripplemax. 50 mV pp
Hold-up time4 ms at 24 V DC
Short-circuit currentmax. 15 A
Galvanic isolation
Input/OutputSELV/PELV
Indicators/settings
Display elementsLED green: status DC OK
- LED lights up if the output voltage is > 21 V
Control elementspotentiometer
Configurationsetting of the output voltage via potentiometer
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUIEC/EN 61000-6-1 , IEC/EN 61000-6-2 , IEC/EN 61000-6-3 , IEC/EN 61000-6-4
Low voltage
Directive 2014/35/EUEN 61010-1
RoHS
Directive 2011/65/EU (RoHS)IEC/EN 63000:2019
Conformity
Degree of protectionEN 60529
Shock resistanceEN 60068-2-27
Vibration resistanceEN 60068-2-6
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F) , see technical information
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humidity5 ... 95 %, noncondensing
Shock resistance20 g , 11 ms or 30 g , 6 ms
Vibration resistance2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 2 g
Mechanical specifications
Housing materialaluminum alloy , galvanized steel
Degree of protectionIP20
Connection
Input/Outputscrew terminals
conductor cross section: max. 6 mm2 (AWG 20-10)
cable diameter: max. 2.8 mm, wire end ferrules included
stripped insulation length: 7 mm
tightening torque: max. 1 Nm
Massapprox. 500 g  
Dimensions42 x 124 x 117 mm (W x H x D) , without DIN mounting rail
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
International approvals
UL approvalE223176
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027040790
ECLASS 12.027040790
ECLASS 11.027040790
ECLASS 10.0.127040790
ECLASS 9.027040790
ECLASS 8.027049090
ECLASS 5.127049090
ETIM 9.0EC002542
ETIM 8.0EC002542
ETIM 7.0EC002542
ETIM 6.0EC002542
ETIM 5.0EC002542
UNSPSC 12.139121004
Product category / 产品类的

Details: PS1000-D2-24.10

Informative Literature: PS1000-D2-24.10

选择语言:
Literature语言文件类型文件大小
Product Information - PS1000 for Global Use up to Zone 2/Div. 2ENGPDF577 KB

Product Documentation: PS1000-D2-24.10

选择语言:
Product information语言文件类型文件大小
Technical informationENGPDF2694 KB
Safety and Security Documentation
Instruction manual / BetriebsanleitungALLPDF151 KB

Design / Simulation: PS1000-D2-24.10

选择语言:
CAD语言文件类型文件大小
CAD 3-D / CAD 3-DALLSTP6395 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ172 KB

Approvals: PS1000-D2-24.10

选择语言:
Certificates证书号码语言文件类型文件大小
US CA ULCoC E223176 RptRef E223176-20070416ALLPDF444 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-4795ALLPDF79 KB
EU Declaration of Conformity (P+F)TDOC-4795AENGENGPDF177 KB