Switch Disconnectors Ex e DIS.*
- Installation in Zone 1, Zone 2, Zone 21 and Zone 22
- Ex db eb and Ex tb certified
- Various contact configurations and pole numbers
- Glass reinforced polyester (GRP) or stainless steel enclosures
- Padlockable switch
- Labeling '0 - I'
- Function-adequate cable gland configurations
- Degree of protection: IP 66
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok DIS.*
| Electrical specifications | ||
|---|---|---|
| Operating voltage | 690 V max. | |
| Rated impulse withstand voltage | 6 kV | |
| Rated frequency | 50/60 Hz | |
| Short circuit current limitation | recommended: 25 A : 35 A, gG 40 A : 63 A, gG |
|
| Operating current | 25 A max. or 40 A max. | |
| Terminal capacity | see data table | |
| Rated insulation voltage | 800 V | |
| Function | switch disconnector | |
| Color | black and red-yellow | |
| Contact configuration | see data table | |
| Switching configuration | 2 position changeover with left OFF | |
| Usage category | see data table | |
| Number of poles | see data table | |
| Auxiliary contacts | see data table | |
| Auxiliary contacts usage category | see data table | |
| Operator action | engage - engage | |
| Lockable | in 'OFF' position threefold padlockable | |
| Labeling | 0 - I | |
| Mechanical specifications | ||
| Enclosure range | see table | |
| Enclosure cover | fully detachable | |
| Cover fixing | stainless steel A4 (V4A) hexagonal head screws or stainless steel combination Phillips and slotted screw | |
| Screws | M6 | |
| Number | 4 | |
| Tightening torque | 3.5 Nm | |
| Cover seal | foamed silicone | |
| Safety | cover detachable only when operator in 'ON' position with SAF.* variants | |
| Degree of protection | IP66 | |
| Cable entry | see data table | |
| Defined entry area | face B | |
| Material | ||
| Enclosure | carbon loaded, antistatic glass-fiber reinforced polyester (GRP) or AISI 316L, (1.4404) stainless steel | |
| Finish | inherent color black or brushed | |
| Mass | see data table | |
| Dimensions | see data table | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | see datasheets of cable glands | |
| Mounting | see data table | |
| Grounding | GRP none as standard stainless steel M6 internal/external brass nickel-plated grounding bolt |
|
| Ambient conditions | ||
| Ambient temperature | -40 ... 55 °C (-40 ... 131 °F) @ T4 | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | CML 16 ATEX 3009X | |
| Marking |  II 2 GD Ex db eb IIC T* Gb Ex tb IIIC T** °C Db T4/T130 °C @ Ta +55 °C |
|
| International approvals | ||
| IECEx approval | IECEx CML 16.0008X | |
| UKCA approval | CML 22 UKEX 2550X | |
| ECAS approval | 22-10-53256/E22-09-052316/NB0002 | |
| IA approval | MASC S/18-0003X | |
| CCC approval | 2020322304002545 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| Usage category | IEC / EN 60947 | |
| CE marking | 0080 or 0102, see type label | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27144052 |
| ECLASS 12.0 | 27144052 |
| ECLASS 11.0 | 27144052 |
| ECLASS 10.0.1 | 27144052 |
| ECLASS 9.0 | 27144052 |
| ECLASS 8.0 | 27144052 |
| ECLASS 5.1 | 27370401 |
| ETIM 9.0 | EC000522 |
| ETIM 8.0 | EC000522 |
| ETIM 7.0 | EC000522 |
| ETIM 6.0 | EC000522 |
| ETIM 5.0 | EC000522 |
| UNSPSC 12.1 | 39121314 |
Details: DIS.*
Function
DIS* switch disconnectors and SAF* safety switches guarantee safe disconnection of machines from the mains power supply during cleaning, maintenance and repair. They can be utilized in hazardous areas up to zone 1 / 21. Various main and auxiliary contact configurations cover many switching requirements.
Enclosure variants are available in high-quality stainless steel and rugged GRP material.
According to IEC 62626-1 the enclosure cover of SAF* variants can only be opened when the switch is in ON position.
Product Documentation: DIS.*
| Brief Instructions | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Brief Instructions - Switch Disconnectors Ex e / Safety Switches Ex e - DIS* / SAF* | ENG | 754 KB |
Approvals: DIS.*
| Certificates | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|---|
| CML IECEx Certificate of Conformity | IECEx CML 16.0008X | ALL | LINK | --- |
| China SITIIAS CCC Ex Certificate | 2020322304002545 (Pepperl+Fuchs SE,Mannheim) | ALL | 13190 KB | |
| ECASEx | 24-02-102377/E22-12-059623/NB0002 | ALL | 850 KB | |
| Europe CML ATEX | CML 16ATEX3009X | ALL | 298 KB | |
| UK-Type Examination Certificate | CML 22UKEX2550X | ALL | 264 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3235B | ALL | 254 KB | |
Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
+36 88 545 902
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.