FieldBarrier Junction Box, Polyester (GRP) F.FB0.P.A.1.0...****

4, 8 or 12 outputs Ex ia
Impact resistance enclosure, IP66
Configurable cable entries for trunk and spurs
Packaged certified solution
For FOUNDATION Fieldbus H1 and PROFIBUS PA
Installation in Zone 1

Technical Data
Informative Literature
Product Documentation
Approvals
配套产品
咨询专家

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

下载PDF版完整参数表:

技术参数节选 F.FB0.P.A.1.0...****

General specifications
Design / Mounting		Outside installation
Installed components		FieldBarrier RD0-FB-Ex4.COM For technical data on installed electronic component see datasheet.
Conformity
Degree of protection		EN 60529
Impact resistance		EN 60079-0
Ambient conditions
Ambient temperature		-30 ... 55 °C (-22 ... 131 °F) , (extended temperature range available on request)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Relative humidity		< 75 % (annual mean) < 95 % (30 d/year), no moisture condensation
Impact resistance		7J
Mechanical specifications
Enclosure cover		detachable cover with retaining screws
Degree of protection		IP66
Cable entry		cable gland and stopping plug options see separate table
Material
	Housing	polyester , impact resistant, glass fiber reinforced
	Surface	black molded finish (RAL 9005)
	Surface resistance	< 10⁹ Ω
	Water absorption	< 6 %
	Seal	silicone , one-piece
	Grounding plate	brass
	Material thickness	grounding plate: 3 mm
Dimensions		(W x H x D) 271 x 271 x 136 mm (1 x RD0-FB-Ex4.COM) 544 x 271 x 136 mm (2 x RD0-FB-Ex4.COM) 544 x 544 x 136 mm (3 x RD0-FB-Ex4.COM)
Mounting		thru-holes Ø6.5 mm
Grounding		grounding bolt M6 , Stainless steel
Data for application in connection with hazardous areas
EU-type examination certificate		PTB 07 ATEX 1061 X (assembled Junction Box) , for additional certificates see www.pepperl-fuchs.com
	Marking	II 2(1)G Ex db eb mb [ia] IIC T4 Gb II 2(1)D Ex tb [ia Da] IIIC T135°C Db Note: The marking is based on the maximum value and can be reduced depending on the selected options accordingly.
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012 , EN 60079-1:2014 , EN 60079-7:2015 , EN 60079-11:2012 , EN 60079-18:2009 , EN 60079-31:2014
International approvals
IECEx approval		IECEx PTB 07.0036 X , suitable Junction Box on request
INMETRO approval		TÜV 13.1143
General information
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27242605
ECLASS 12.0	27242605
ECLASS 11.0	27242605
ECLASS 10.0.1	27242605
ECLASS 9.0	27242605
ECLASS 8.0	27242605
ECLASS 5.1	27242605
ETIM 9.0	EC001601
ETIM 8.0	EC001601
ETIM 7.0	EC001601
ETIM 6.0	EC001601
ETIM 5.0	EC001604
UNSPSC 12.1	39121008
Product category / 产品类的

Details: F.FB0.P.A.1.0...****

Informative Literature: F.FB0.P.A.1.0...****

Literature	语言	文件类型	文件大小
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron	ENG	PDF	361 KB
Application Report - Digital Communication in Steel-Plate Manufacturing	ENG	PDF	470 KB

Product Documentation: F.FB0.P.A.1.0...****

Safety and Security Documentation	语言	文件类型	文件大小
Instruction manual	ENG	PDF	140 KB
Manuals
Manual	ENG	PDF	928 KB

Approvals: F.FB0.P.A.1.0...****

Certificates	证书号码	语言	文件类型	文件大小
Brasil TUV Rheinland Brazil	TÜV 13.1143	ALL	PDF	1259 KB
Europe PTB ATEX Category 2 G ATEX Category 2 D	PTB 07 ATEX 1061 X	ALL	PDF	500 KB
Worldwide PTB IECEx Certificate of Conformity Certificate	IECEx PTB 07.0036X	ALL	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-3151C	ALL	PDF	135 KB

配套产品: F.FB0.P.A.1.0...****

Matching System Components

	RD0-FB-Ex4.* Fieldbus Barrier
	FieldConnex® Fieldbus, Fieldbus barrier, module for DIN rail mounting, 4 outputs Ex ia IIC, FieldBarrier in Zone 1/Div. 2, Instruments in Zone 0...1/Div. 1, Short circuit current limitation per output, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, Dust protection, International, Europe, USA, Canada, Device coupler location: Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa