Type Z & Ex pzc purge and pressurization system 7500-MTD-PMRW-01

Must be used in conjunction with an EPV-7500-* vent
Panel mount, rectangular panel
Universal power: AC or DC
Touch screen display with LEDs for easy visual indication
Easy setup with pre-set purge programs for your application
Automatic pressure compensation with digital manifold
Rugged, corrosion-resistant housing
Global third-party approvals for Class I, II, Div. 2 and Zone 2/22
Manual valve, no electrical power requirement
Purge and pressurization valving in one device

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
配套产品
咨询专家

请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。

下载PDF版完整参数表:

技术参数节选 7500-MTD-PMRW-01

产品阐述
Type Z & Ex pzc purge and pressurization system, panel mount, rectangular panel

General specifications
Equipment architecture		max. enclosure size 12.7 m³ (450 ft³) For complete technical data, see the 7500 Control Unit and 7500-MAN-MV-01 datasheets
Operating mode		fully automatic (FA)
Series		7500
System		Type Z Purge ; Ex pzc Purge
Hazardous environment		gas or dust
Supply
Rated voltage		20 ... 30 V DC at 0.1 A 90 ... 250 V AC , 50 ... 60 Hz at 0.04 A without solenoid valve Supply voltage can be line-to-line or line-to-neutral, single phase OVC II
Power consumption		max. 2.7 W / 7.3 VA without valve
Electrical specifications
Connection		screw terminals -- see manual for specifications on wire size and torque values
Output
Output I
	Connection	K1, terminals, 1 x NO
	Output type	enclosure power contacts
	Contact loading	5 A at 250 V AC , 5 A at 30 V DC, relays must be externally fused inrush current: 50 A
Output II
	Connection	K2, terminals, 1 x NO
	Output type	alarm and control contacts
	Contact loading	5 A at 250 V AC , 5 A at 30 V DC, relays must be externally fused inrush current: 50 A
Output III
	Connection	SV1, terminals, L1 powered contact
	Output type	solenoid manifold, contact
	Contact loading	0.5 A at 250 V AC , 0.5 A
Indicators/settings
LED indication		K1: Green - Contact K1 is energized (enclosure contacts) K2: Amber - Contact K2 is energized (alarm/control contacts) P/SV: Blue - Safe pressure P1 (minimum enclosure pressure) P/SV: Amber - Solenoid manifold is energized (purging/pressure compensation)
Pneumatic parameters
Protective gas supply		compressed air or inert gas, 40 µm filter, free from oil
Pressure requirement		supply pressure: 1.4 ... 8.2 bar (20 ... 120 psig)
Safe pressure		P1 for gas: 0.12 inch w.c. (0.30 mbar) P1 for dust: 0.52 inch w.c. (1.29 mbar) P2: 0.8 inch w.c. (1.99 mbar) P3: 2.5 inch w.c. (6.22 mbar) P4: 4.5 inch w.c. (11.2 mbar) pressure sensing: ± 0.125 in wc (0.31 mbar)
Enclosure pressure		0 ... 12.9 mbar (0 ... 5 in wc)
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
RoHS
	Directive 2011/65/EU (RoHS)	EN IEC 63000:2018
Conformity
Electromagnetic compatibility		EN 61326-3-2:2008, EN 61000-6-2:2005
Emitted interference		FCC CFR 47, part 15, subpart B: 2017 , ICES-003, Issue 6:2016, Class A ITE
Ambient conditions
Ambient temperature		-40 ... 50 °C (-40 ... 122 °F) at T6 -40 ... 65 °C (-40 ... 149 °F) at T5 -40 ... 70 °C (-40 ... 158 °F) at T4
Storage temperature		-40 ... 80 °C (-40 ... 176 °F)
Relative humidity		5 ... 90 %, non-condensing
Altitude		max. 2000 m
Vibration resistance		5 ... 100 Hz , 1 g, 12 m/s², all axes
Impact resistance		30 g, 11 ms, all axes
Mechanical specifications
Connection type		electrical: 2 x 1/2 inch NPTF (open from factory) 1 x M12 opening (plugged from factory) pneumatic: high-pressure port - 1/8 in NPTF, low-pressure port - 1/8 in NPTF
Degree of protection		Mounting to enclosure Type 4X / IP66
Material		Lens: Makrolon® GP-V polycarbonate Screws: AISI 316 (1.4401), 304, or 18-8 stainless steel Housing: A380, A356, or 6061-T6 aluminum Mounting gasket: Bisco® HT-800 medium cellular silicone Mounting tabs: SAE 304 stainless steel M12 plug: 6061-T6 aluminum
Mass		2.5 kg (5 lb 10 oz)
Data for application in connection with hazardous areas
Certificate
	Marking	II 3 G Ex ec mc nC [pzc Gc] IIC T6...T4 Gc II 3 D Ex mc tc [pzc Dc] IIIC T60 °C ... T80 °C Dc
Directive conformity
	Directive 2014/34/EU	IEC/EN 60079-0 , IEC/EN 60079-2 , IEC/EN 60079-7 , IEC/EN 60079-15 , IEC/EN 60079-18 , IEC/EN 60079-31 Supplements: EN 61010-1:2010
International approvals
UL approval
	cULus	Class I, Division 2, Groups A, B, C, D T6 ... T4 Class II, Division 2, Groups F, G T6 ... T4
IECEx approval		Ex ec mc nC [pzc Gc] IIC T6...T4 Gc Ex mc tc [pzc Dc] IIIC T60 °C ... T80 °C Dc
General information
Supplementary information		Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27180508
ECLASS 12.0	27180508
ECLASS 11.0	27180508
ECLASS 10.0.1	27180508
ECLASS 9.0	27180508
ECLASS 8.0	27180508
ECLASS 5.1	40050501
ETIM 9.0	EC000243
ETIM 8.0	EC000243
ETIM 7.0	EC000243
ETIM 6.0	EC000243
ETIM 5.0	EC000243
UNSPSC 12.1	39121301
Product category / 产品类的

Details: 7500-MTD-PMRW-01

Informative Literature: 7500-MTD-PMRW-01

Literature	语言	文件类型	文件大小
Product Information - Pepperl+Fuchs Bebco EPS® 7500 Series Type Z/Ex pzc Purge and Pressurization System / Produktinformation - Bebco EPS® Überdruckkapselungssystem der Serie 7500 Typ Z/Ex pzc	CHS	PDF	1152 KB

Product Documentation: 7500-MTD-PMRW-01

Safety and Security Documentation	语言	文件类型	文件大小
Instruction manual / Betriebsanleitung	CHS	PDF	341 KB
Manuals
Manual	ENG	PDF	5689 KB

Design / Simulation: 7500-MTD-PMRW-01

CAD	语言	文件类型	文件大小
CAD 2-D / CAD 2-D	ALL	ZIP	963 KB
CAD 3-D / CAD 3-D	ALL	STP	11349 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: 7500-MTD-PMRW-01

Certificates	证书号码	语言	文件类型	文件大小
Brasil TUV Rheinland Brazil	TÜV 22.1423X	ALL	PDF	1303 KB
IECEx Certificate of Conformity	IECEx UL 18.0022X	ALL	LINK	---
Korea KOSHA	18-AV4BO-0462X	ALL	PDF	504 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-B0C4C	ALL	PDF	171 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-B0F8	ALL	PDF	167 KB

配套产品: 7500-MTD-PMRW-01

Accessories

	5500-MAN-CDUL-* 5500 series manifold
	Manifold valve used in UL certified installationpa

	5500-MAN-CDUL-24VDC 5500 series manifold
	Manifold valve used in UL certified installationpa

	5500-MAN-CDUL-230VAC 5500 series manifold
	Manifold valve used in UL certified installationpa

	EPV-7500-AA-01 7500 series vent
	You must purchase a 7500 series control unit with this vent.pa

	EPV-7500-AA-02 7500 series vent
	You must purchase a 7500 series control unit with this vent.pa

	EPV-7500-AA-03 7500 series vent
	You must purchase a 7500 series control unit with this vent.pa

	EPV-7500-SS-01 7500 series vent
	You must purchase a 7500 series control unit with this vent.pa

	EPV-7500-SS-02 7500 series vent
	You must purchase a 7500 series control unit with this vent.pa

	EPV-7500-SS-03 7500 series vent
	You must purchase a 7500 series control unit with this vent.pa

	5500-MAN-EX01-* 5500 manifold, ATEX & IECEx certified
	Manifold valve used in ATEX and IECEx certificated installationpa

	5500-MAN-CDUL-120VAC 5500 series manifold
	Manifold valve used in UL certified installationpa

General Notes Relating to Pepperl+Fuchs Product Information

快速链接

Bebco EPS® 正压通风技术

了解危险区域防爆的智能方法，并配置您的定制化正压通风系统！

倍加福（北京）过程自动化控制设备有限公司
北京市经济技术开发区
科创十四街99号7号楼3101室
101111 Beijing
中国
pa-info@cn.pepperl-fuchs.com
phone +86 10 5901 7000

上海倍加福工业自动化贸易有限公司
上海市静安区市北工业园区江场三路
219号4楼
200436 上海
中国
fa-info@cn.pepperl-fuchs.com
phone +86 21 6630 3939

德国倍加福公司（P+F）是全球自动化行业中久负盛名的专业传感器公司。倍加福作为全球自动化领域的电子传感与零部件的生产主导者，凭借不断的创新，恒久的质量保证，稳健的发展，保证了迄今六十余年的辉煌成就。倍加福在全球范围内拥有6300名员工，位于德国，美国，新加坡，匈牙利，印度尼西亚和越南的生产基地几乎全部通过了ISO9001的质量认证。