Vibration sensor VIM62PL-E0T16-0ME-I420V14

Extended temperature range
Screw-in thread for simple installation
Simple electrical commissioning
Rugged stainless steel housing
Vibration velocity in mm/s (rms) acc. to DIN ISO 10816/20816
Detection of low frequency vibrations
Additional output with measured temperature value

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Prodotti associati
Chiedi ad un esperto

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Scarica il Datasheet completo in formato PDF:

Estratto del Datasheet: Dati tecnici del VIM62PL-E0T16-0ME-I420V14

Descrizione prodotto
Vibration sensor with analog current output and increased temperature resistance

General specifications
Type		Vibration sensor
Measuring technology		MEMS
Series		Performance Line
Measured variable		Vibration velocity Temperature
Measuring range
	Vibration velocity	0 ... 16 mm/s
	Temperature	-40 ... 125 °C (-40 ... 257 °F)
Measurement accuracy		± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s
Cross-sensitivity		< 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis
Frequency range		1 ... 1000 Hz
Averaging time		for v-rms: 12 s
Electrical specifications
Fusing		external fuse is required: 3 A , semi-time-lag , 30 V DC
Operating voltage		10 ... 30 V DC
Current consumption		max. 50 mA
Power consumption		max. 750 mW
Time delay before availability		10 s (rms filter is calculated intially with measurement data before they are available at the output)
Surge protection		up to 2 kV
Output 1
Output type		analog output, current output of the vibration variable
Output current		4 ... 20 mA
Load resistor		≤ 500 Ω
Output 2
Output type		analog output, current output of the temperature
Output current		4 ... 20 mA
Load resistor		≤ 500 Ω
Standard conformity
Degree of protection		DIN EN 60529, IP66, IP67
Shock resistance		DIN EN 60068-2-27, 60 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz
Vibration evaluation		DIN ISO 10816/20816
Approvals and certificates
UL approval
	Ordinary Location	E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on request
	Maximum permissible ambient temperature	max. 60 °C (max. 140 °F)
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Measuring head temperature		-40 ... 125 °C (-40 ... 257 °F) directly at the mounting point
Storage temperature		-40 ... 60 °C (-40 ... 140 °F)
Mechanical specifications
Connection type		plug
Housing material		Stainless steel 1.4305 / AISI 303
Degree of protection		IP66 / IP67 only in connected state
Connector
	Threading	M12
	Number of pins	4
Mass		approx. 200 g
Dimensions
	Length	82.35 mm
	Diameter	31 mm

Classifications

System	Classcode
ECLASS 13.0	27271103
ECLASS 12.0	27201406
ECLASS 11.0	27201406
ECLASS 10.0.1	27201406
ECLASS 9.0	27201406
ECLASS 8.0	27201406
ECLASS 5.1	27201406
ETIM 9.0	EC004309
ETIM 8.0	EC004309
ETIM 7.0	EC002959
ETIM 6.0	EC002959
ETIM 5.0	EC001758
UNSPSC 12.1	41114624

Details: VIM62PL-E0T16-0ME-I420V14

Informative Literature: VIM62PL-E0T16-0ME-I420V14

Literature	Lingua	File tipo	Dimensioni
Product Overview - Vibration Sensors	ENG	PDF	1351 KB

Product Documentation: VIM62PL-E0T16-0ME-I420V14

Brief Instructions	Lingua	File tipo	Dimensioni
Instruction leaflet / Beipackzettel	ALL	PDF	252 KB
Safety and Security Documentation
Manuale di istruzioni	ITA	PDF	147 KB
Manuals
Manual VIM6*-Vibration Sensors	ENG	PDF	2498 KB

Design / Simulation: VIM62PL-E0T16-0ME-I420V14

CAD	Lingua	File tipo	Dimensioni
CAD 3-D / CAD 3-D	ALL	STP	1973 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	67 KB

Approvals: VIM62PL-E0T16-0ME-I420V14

Certificates	Certificato Numero	Lingua	File tipo	Dimensioni
Canada, USA UL Ordinary Location	E468231	ALL	PDF	610 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-5277A	ALL	PDF	324 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5593A	ALL	PDF	248 KB

Prodotti associati : VIM62PL-E0T16-0ME-I420V14

Accessories

	V1-G-3M-PUR-ABG0 Cable socket, shielded
	Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable grey, shieldedfa

	RSL6-CS-SC-M55P200 Protective rubber sleeve
	Protective rubber sleeve for VIM6* vibration sensors against ingress of moisture and mechanical effectsfa

	MONAD-M08-1,25-M08-1,25K/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 19.5fa

	MONAD-M08-1,25-M10-1,5/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M10 x 1.5, screw-in depth 18fa

	MONAD-M08-1,25-M30-3,5/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M30 x 3.5, screw-in depth 45fa

	MONAD-M08-1,25-1,2Z-BSPT/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread NPT1/2", screw-in depth 24fa

	EMCAD-M08-1,25-M08-1,25/36 Mounting adapter
	EMC adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 8fa

	V1-G-BK5M-PUR-U/ABG0 Cable socket, shielded
	Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, shielded, UL approved, drag chain suitablefa

	MONAD-M08-1,25-M06-1,0/36 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M6 x 1.0, screw-in depth 10fa

	MONAD-M08-1,25-M16-2,0/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M16 x 2.0, screw-in depth 27fa

	MONAD-M08-1,25-M20-2,5/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M20 x 2.5, screw-in depth 34fa

	MONAD-M08-1,25-M24-3,0/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M24 x 3.0, screw-in depth 40fa

	MAGAD-M08-1,25-MAG/36 Magnetic adapter
	Magnetic adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, holding force 35 kgfa

	ICA-AI-I/U-IO-V1 IO-Link converter
	IO-Link converter with analog input (current/voltage)fa

Informazione generale sul prodotto

Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
phone +39 039 69599 1

Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
phone +39 039 62921

Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.