Línea de servicio de Sensores Industriales
Teléfono: +34 94 453 50 20
Fax: +34 94 453 51 80
Atención al cliente para protección contra explosiones
Teléfono: +34 94 453 50 20
Fax: +34 94 453 51 80
Headset LiteCom PRO III Ex Headband 403-470 MHz
- Programmable analog/digital DMR two-way radio communication
- Bluetooth® multipoint functionality
- Water tight microphone (IP68)
- Environmental listening with level-dependent hearing protection
- Voice menu with multiple language selection
- Push-to-Listen function
- Rechargeable Li-Ion battery and battery status indication
- Voice operated transmission (VOX)
- Busy channel indication
- Auto power off function
- ATEX and IECEx approvals
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Descargue la hoja de datos completa en PDF:
Extracto de la hoja de datos: Información técnica del LiteCom PRO III Ex Headband 403-470 MHz
| Descripción del producto |
|---|
| 3M™ PELTOR™ WS™ LiteCom Pro III Ex Headset, 403-470 MHz, Analog/Digital, Ex, EU version, Headband |
| General specifications | ||
|---|---|---|
| Description | Headband | |
| Hardware | ||
| Microphone | Dynamic (MT73) | |
| Two-way radio | ||
| Frequency range | 403 ... 470 MHz | |
| Operating mode | Simplex | |
| Channels | 70 programmable channels | |
| Channel grid | 12,5 kHz and 25 kHz | |
| Modulation | Analog: 2,5 kHz (FM) and 5 kHz (FM) Digital: 2,5 kHz (4-level FSK) |
|
| Sensitivity (Receiver) | Typical -120 dBm | |
| Selective squelch | Programmable (supports CTCSS and DCS) | |
| Power Output | 200 / 20 / 10 mW ER | |
| Detection range | Outdoors up to 2 km depending on conditions | |
| Electrical specifications | ||
| Battery type | Li-ion 3.7 V , 1350 mAh , 5 Wh | |
| Charging time | approx. 12 h | |
| Operating duration | 8 h * (90 stby / 5 tx / 5 rx) * can be increased up to 12 hours with the power save feature |
|
| Ambient conditions | ||
| Operating temperature | -20 ... 50 °C (-4 ... 122 °F) | |
| Storage temperature | -20 ... 55 °C (-4 ... 131 °F) < 90 % Humidity |
|
| Mechanical specifications | ||
| Mass | 521 g | |
| Data for application in connection with hazardous areas | ||
| ATEX approval | ||
| ATEX certificate | Presafe 16ATEX8960X | |
| ATEX marking | I M1 Ex ia I Ma -20°C ≤ Ta: ≤ +50°C II 1G Ex ia IIC T4 Ga -20°C ≤ Ta ≤ +50°C Ga II 1D Ex ia IIIC T130°C Da -20°C ≤ Ta ≤ +50°C |
|
| International approvals | ||
| IECEx approval | ||
| IECEx certificate | Presafe 16.0086X | |
| IECEx marking | Ex ia I Ma -20°C ≤ Ta: ≤ +50°C Ex ia IIC T4 Ga -20°C ≤ Ta ≤ +50°C Ex ia IIIC T130°C Da -20°C ≤ Ta ≤ +50°C |
|
| General information | ||
| Scope of delivery | 3M™ PELTOR™ WS™ LiteCom Pro III Ex headset. Battery ACK082 Power supply FR08 Cable AL2AH (for ACK082) Hygiene kit HY83 Documentation |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 19069090 |
| ECLASS 12.0 | 19069090 |
| ECLASS 11.0 | 19069090 |
| ECLASS 10.0.1 | 19069290 |
| ECLASS 9.0 | 19069290 |
| ECLASS 8.0 | 19069290 |
| ECLASS 5.1 | 19069290 |
| ETIM 9.0 | EC002696 |
| ETIM 8.0 | EC002696 |
| ETIM 7.0 | EC002696 |
| ETIM 6.0 | EC002696 |
| ETIM 5.0 | EC002696 |
| UNSPSC 12.1 | 43191507 |
Details: LiteCom PRO III Ex Headband 403-470 MHz
Approvals: LiteCom PRO III Ex Headband 403-470 MHz
| Declaration of Conformity | Número de Certificado | Idioma | Tipo de archivo | Tamaño |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-5242 | ALL | 338 KB |
Productos asociados: LiteCom PRO III Ex Headband 403-470 MHz
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs, S.A.
Txori-Erri Etorbidea, 46
Edificio Esser
48150 Sondika (Vizcaya)
España
sov@es.pepperl-fuchs.com
+34 94 4535 020
© 2024 Todos los derechos reservados
Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.