Type Y & Z purge and pressurization system 1001A
- NFPA 70, NFPA 496, ISA 12.4 standards
- Optional alarm output indicates air lock failure
- Type Y system certified for Class I and Class II, Division 1 to Division 2
- Type Z system certified for Class I and Class II, Division 2 to nonhazardous area
- Class I enclosure volume up to 2 ft3
- Class II enclosure volume up to 10 ft3
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF:
Caractéristiques techniques 1001A
| Description produit |
|---|
| 1001A Series purge and pressurization system |
| General specifications | ||
|---|---|---|
| Series | 1001A | |
| System | Type Y Purge , Type Z Purge | |
| Hazardous environment | gas or dust | |
| Electrical specifications | ||
| Connection | Terminal blocks | |
| Output | ||
| Output I | -WPS- | |
| Output type | Switch contacts | |
| Contact loading | 120 VAC @ 15 A | |
| Output II | -WPSA- | |
| Output type | Switch contacts | |
| Contact loading | 120/220 VAC; 24 VDC @ 10 A; 125 VDC @ 50 mA power requirements: 24 / 120 / 240 VDC @ 3 / 4 / 11 watts |
|
| Pneumatic parameters | ||
| Protective gas supply | instrument grade air or inert gas | |
| Pressure requirement | 5 - 120 psi (With EPV-1 vent. Systems installed without vent must be equipped with redundant regulator set to 5 psi max.) |
|
| Safe pressure | Setpoint: Class I: 0.25" (6.35 mm); Class II: 1.0" (25.4 mm) Flow rate: 0.1 - 3.5 SCFH (2.8 - 99 l /hr) |
|
| Ambient conditions | ||
| Ambient temperature | -29 ... 49 °C (-20.2 ... 120.2 °F) | |
| Mechanical specifications | ||
| Connection type | System supply fitting: 1/4" tube fitting Enclosure supply fitting: 1/4" tube fitting Enclosure reference fitting: 1/4" tube fitting Switch conduit port size: 1/2" FPT |
|
| Material | Regulator body: zinc w/enamel finish Regulator handle: polycarbonate Enclosure pressure gauge: alum. w/enamel finish Tube fitting: 316 ss forged body Tubing: 316 ss 1/4" .035 welded System nameplate: silk screened Lexan® & ss Fastener hardware: alum. & stainless steel Mounting plate: 316 14 ga #3 brush ss EXP pressure switch body: anodized cast aluminum Enclosure warning nameplate: silk screened ss |
|
| Mass | 1001A-LPS-* 2.3 kg (5 lb) 1001A-WPS* 4.5 kg (10 lb) |
|
| International approvals | ||
| FM approval | Type Y LPS: Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, and G WPS: Class I, Division 1, Groups C, D; Class II, Division 1, Groups E, F, and G WPSA: Class I, Division 1, Groups A, B, C, D Type Z LPS: Class I, Division 2, Groups A, B, C, D; Class II, Division 2, Groups E, F, and G WPS: Class I, Division 2, Groups C, D; Class II, Division 2, Groups E, F, and G WPSA: Class I, Division 2, Groups A, B, C, D |
|
| UL approval | ||
| cULus | Type Y LPS: Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, and G WPS: Class I, Division 1, Groups C, D; Class II, Division 1, Groups E, F, and G WPSA: Class I, Division 1, Groups A, B, C, D Type Z LPS: Class I, Division 2, Groups A, B, C, D; Class II, Division 2, Groups E, F, and G WPS: Class I, Division 2, Groups C, D; Class II, Division 2, Groups E, F, and G WPSA: Class I, Division 2, Groups A, B, C, D |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180508 |
| ECLASS 12.0 | 27180508 |
| ECLASS 11.0 | 27180508 |
| ECLASS 10.0.1 | 27180508 |
| ECLASS 9.0 | 27180508 |
| ECLASS 8.0 | 27180508 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121301 |
Details: 1001A
Product Documentation: 1001A
| Brief Instructions | Langue | Type de fichier | Taille |
|---|---|---|---|
| Installation and Operation Manual: Model 1001A Type Y or Z Purge/Pressurization System | ENG | 10533 KB |
Approvals: 1001A
| Certificates | Identification | Langue | Type de fichier | Taille |
|---|---|---|---|---|
| Canada, USA FM | CoC 3018335 | ALL | 433 KB | |
| UL Hazardous Location | E184741 (RFPW, RFPW7) | ALL | 193 KB |
- Demandez à un Expert
- Demande pour une référence équivalente
- Suivi de votre commande en cours
- Nouveautés
- Service Level Agreements for ecom instruments
- Où commander
- Sélection de documentations
- Technologies
- Solutions systèmes de contrôle
- Recherche de documents techniques, catalogues ou brochures
- Articles de presse
- Salons internationaux
- Salons et événements - France
Découvrez la façon la plus intelligente de garantir la protection des zones à risques d'explosion et de configurer votre système individuel de purge et pressurisation !
Pepperl+Fuchs Eurl
12 Avenue des Tropiques
91955 Courtaboeuf Cedex
France
info@fr.pepperl-fuchs.com
+33 1 60921300
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.