Connection cable, Ethernet V1D-M16H-GN1M-PUR-E1S-V45-G
- Hard-wearing PUR cable
- Suitable for drag chains and abrasion resistant
- Industrial Ethernet
- D coding for Ethernet
- Conforms to PROFINET
- CAT5/CAT5e cable
- Free of paint wetting interfering substances
- Halogen-free
- Rear/screw mounting
- Image is generic for this device type and may deviate from the specific variant
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Scarica il Datasheet completo in formato PDF:
Estratto del Datasheet: Dati tecnici del V1D-M16H-GN1M-PUR-E1S-V45-G
| Descrizione prodotto |
|---|
| Ethernet bus cable receptacle M12 socket straight D-coded to RJ45 Ethernet-coded, 4-pin, PUR cable green, Cat5e, shielded, drag chain suitable |
| General specifications | ||
|---|---|---|
| Connector 1 | ||
| Connection | socket | |
| Construction type | M12 | |
| Style | straight | |
| Locking | screw connection | |
| Number of pins | 4 | |
| Coding | D-coded | |
| Customization | Receptacles | |
| Connector 2 | ||
| Connection | plug | |
| Construction type | RJ45 | |
| Style | straight | |
| Locking | snap locking | |
| Number of pins | 8 | |
| Coding | EtherNet/IP / PROFINET | |
| Electrical specifications | ||
| Operating voltage | max. 48 V AC / 60 V DC | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| Plug connection | connector M12 x 1 : IEC 61076-2-101 connector RJ45 : IEC 60603-7 |
|
| Component category | CAT5 (IEC 11801) , CAT5e (IEC 61156-6) | |
| Flammability | IEC 60332-1-2 / UL 2556 / ISO 6722-1 5.22 (UN ECE-R 118.01) | |
| Ambient conditions | ||
| Ambient temperature | ||
| Connector 1 | -40 ... 90 °C (-40 ... 194 °F) | |
| Cable, fixed installation | -30 ... 70 °C (-22 ... 158 °F) , UL: -20 ... 70 °C (-4 ... 158 °F) | |
| Cable, flexing | -20 ... 70 °C (-4 ... 158 °F) | |
| Mechanical specifications | ||
| Connector 1 | ||
| Tightening torque | 0.6 Nm | |
| Tool installation | Rear mounting M16 , SW = 17 mm and SW = 19 mm | |
| Mating cycles | min. 100 | |
| Shielding | shield connected to connector | |
| Degree of protection | IP67 | |
| Connector 2 | ||
| Loosening protection | available | |
| Mating cycles | min. 100 | |
| Shielding | shield connected to connector | |
| Degree of protection | IP20 | |
| Cable | according to IEC/EN 60228 (DIN VDE 0295) class 5 | |
| Sheath diameter | 6 mm | |
| Bending radius | > 10 x cable diameter, movable installation > 8 x cable diameter, fixed installation |
|
| Sheath stripping force | max. 60 N / 100 mm | |
| Sheath color | green (similar to RAL 6018) | |
| Number of cores | 4 | |
| Core cross section | 0.34 mm2 / 22 AWG | |
| Cores color | Core 1-1: yellow Core 2-3: white Core 3-2: orange Core 4-6: blue |
|
| Core construction | 7 x 0.254 mm ∅ twisted quad |
|
| Shield | aluminum-lined polyester foil Tinned copper braiding |
|
| Length | 1 m | |
| Drag chain suitability | ||
| Drag chain cycles | max. 1000000 | |
| Motion velocity | max. 3 m/s | |
| Traverse distance | max. 5 m | |
| Acceleration | max. 2 m/s2 | |
| Mass | 73.04 g | |
| Material | ||
| PWIS free | yes | |
| Halogen-free | yes | |
| Connector 1 | ||
| Screw connection | Zinc diecast, nickel-plated | |
| Seal | FKM | |
| Contact surface | Au | |
| Flammability | V-2 | |
| Connector 2 | ||
| Body | PA, green | |
| Flammability | V-0 | |
| Cable | ||
| Sheathing | PUR based on polyether | |
| Core insulation | PP | |
| Flammability | FT2 complies with UN ECE-R 118.01 |
|
| General information | ||
| Scope of delivery | locknut included | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27060307 |
| ECLASS 12.0 | 27060307 |
| ECLASS 11.0 | 27060307 |
| ECLASS 10.0.1 | 27060307 |
| ECLASS 9.0 | 27060390 |
| ECLASS 8.0 | 27060390 |
| ECLASS 5.1 | 27279201 |
| ETIM 9.0 | EC001855 |
| ETIM 8.0 | EC001855 |
| ETIM 7.0 | EC001855 |
| ETIM 6.0 | EC001855 |
| ETIM 5.0 | EC002585 |
| UNSPSC 12.1 | 31251501 |
Details: V1D-M16H-GN1M-PUR-E1S-V45-G
Design / Simulation: V1D-M16H-GN1M-PUR-E1S-V45-G
| CAD | Lingua | File tipo | Dimensioni |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2517 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: V1D-M16H-GN1M-PUR-E1S-V45-G
| Declaration of Conformity | Certificato Numero | Lingua | File tipo | Dimensioni |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4458A | ALL | 287 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6744 | ALL | 213 KB |
Prodotti associati : V1D-M16H-GN1M-PUR-E1S-V45-G
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
+39 039 69599 1
Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
+39 039 62921
Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.