Assistance gamme Détecteurs industriels
Tél.: +33 1 60 92 13 13
Fax : +33 1 60 92 13 25
Contacter le service commercial
Support en ligne pour la protection contre le risque d’explosion
Tél.: +33 1 60 92 13 14
Fax:  +33 1 60 92 13 25
Contacter le service clients

Alarm sounder/signal beacon PF-IS-CM-105-*

PF-IS-CM-105-*
  • ATEX, IECEx and UKEX approval
  • For use in Zone 0, 1, 2, 20, 21, 22 and mining applications
  • Max. output of 105 dB
  • Available with 32 tones and 2 stages
  • Flashing or steady state options
  • Recommended for fire, security and process control applications
  • Degree of protection: IP 66
  • Compliant with EN 54-3
  • Diode polarized and end of line resistor compatible

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Téléchargez ici la fiche technique complète en PDF:

English

Caractéristiques techniques  PF-IS-CM-105-*

Description produit
Multi-purpose signalling device, alarm sounder with flashing or steady-state LED signal beacon, type of protection Ex ia IIC
Electrical specifications
Operating voltage16 ... 28 V DC , via zener barrier or galvanic isolator
Operating current31 mA @ 24 V DC max. - value measured with Zener barrier connected
Terminal capacity0.5 ... 2.5 mm2
Functionalarm sounder with flashing signal beacon LED
Lens colorred , amber , green , blue or clear
Flash mode1 Hz flash 60 FPM or steady light high power
Luminous intensityDependent on head selected
Effective luminous intensity, measured4.22 cd max. value measured with Zener barrier connected
Illuminant, typearray of 9x high-intensity LEDs
Sound pressure level, maximum105 dB @ 1 m +/- 3 dB - sound 18 , 95 dB @ 3 m
Sound pressure level, nominal87 dB @ 1 m +/- 3 dB - sound 1
Number of sounds32
Number of stages2
Mechanical specifications
Enclosure coverfully detachable
Cover fixingStainless steel screws
Degree of protectionIP66
Cable entry face C
M20 quantity1
M20 typethru-holes
M20 infowithout entry devices (ordered separately)
Cable entry face E
M20 quantity1
M20 typeknockout
Material
EnclosurePolycarbonate UL94 V2
FinishRAL 3000 (red)
Sealnitrile O-ring
Seal insertNeoprene
Mass0.29 kg
GroundingInternal connection
Ambient conditions
Ambient temperature-40 ... 60 °C (-40 ... 140 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Data for application in connection with hazardous areas
EU-type examination certificateERO 24 ATEX 0014X
MarkingEx-Hexagon II 1 GD
Ex ia IIC T5 Ga
Ex ia IIIC T200 85°C Da
Ex-Hexagon I M1
Ex ia I Ma
Equipment
Voltage28 V max.
Current93 mA max.
Power660 mW max.
Internal capacitance0 µF max.
Internal inductance0 mH max.
International approvals
IECEx approvalIECEx EMT 24.0011X
UKCA approvalEMA 24 UKEX 0006X
Further approvalsavailable on request
Conformity
Degree of protectionEN 60529
CE marking2829
UKCA marking2503
General information
Scope of deliverydevice
Instruction leaflet
Gasket set
Allen wrench
anti-rotation grub screw
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
Accessories
Optional accessoriesCG.PIDS1.M20.PA.C.10.K01.LN55
SP.PE.M20.*

Classifications

SystemClasscode
ECLASS 13.027110509
ECLASS 12.027110509
ECLASS 11.027110509
ECLASS 10.0.127110509
ECLASS 9.027110509
ECLASS 8.027110509
ECLASS 5.127371220
ETIM 9.0EC002493
ETIM 8.0EC002493
ETIM 7.0EC002493
ETIM 6.0EC002493
ETIM 5.0EC001952
UNSPSC 12.139121314
undefined

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Deny all cookies

We value your privacy!

Please select the group of cookies and scripts, that you consent to.

Functional
These cookies are necessary so that you can navigate through the pages and use essential functions (e.g. login).
Analytics
We use these cookies and scripts to measure the visits and clicks on our website in order to constantly improve it.
Marketing
These cookies and similar technologies are used to provide you with personalized and therefore relevant advertising content.